Post AVaKUt40l6azf0kca0 by flexion@oldbytes.space
 (DIR) More posts by flexion@oldbytes.space
 (DIR) Post #AVaKUnsq1DgfauU7yC by flexion@oldbytes.space
       2023-04-21T20:27:25Z
       
       0 likes, 1 repeats
       
       For some reason I am designing an SGI Origin C-Brick in Blender 🧊​
       
 (DIR) Post #AVaKUp39gLXBDCJsgq by flexion@oldbytes.space
       2023-05-12T16:56:18Z
       
       0 likes, 1 repeats
       
       The SGI server rack side panels turn out to be a nightmare to 3d-print. The curved design with its height needs to be printed in two or more slices and eats up tons of support. Also due to +8h printing time for each attempt, material on the heated printing bed starts bending. Don't know yet how to make it look good :thinkhappy:​
       
 (DIR) Post #AVaKUq0M8EtCAo19xw by flexion@oldbytes.space
       2023-04-24T18:19:10Z
       
       0 likes, 0 repeats
       
       Miniature SGI Origin rack.. still WIP. First prototype printed. Still have to design the riser cage for the I/O board and print the front again with another filament and more inserts for the mobo PCB.
       
 (DIR) Post #AVaKUraYF9R75Lxa1Q by flexion@oldbytes.space
       2023-04-30T05:10:23Z
       
       0 likes, 0 repeats
       
       InfiniteReality brick. Now I have to design the parts to populate PCBs for Ktown, GE, RM and DG boards.
       
 (DIR) Post #AVaKUt40l6azf0kca0 by flexion@oldbytes.space
       2023-04-25T10:43:54Z
       
       0 likes, 0 repeats
       
       smol SGI server is smol 🔍​I've added the PCI riser cage and cards, both with a layer of tiny chips. Now I have to print this up to 7 times to fill up the whole server rack.
       
 (DIR) Post #AVaKUt40l6azf0kca1 by flexion@oldbytes.space
       2023-04-27T04:58:46Z
       
       0 likes, 0 repeats
       
       Designing front panels for the 98kg / 215lb SGI InfiniteReality graphics brick for 3D print took quite a few iterations to find the best result. Up to 8 hours printing time each time and it took me two full days to find the final variant which is still printing right now.
       
 (DIR) Post #AVaKUt4MjmsZg6uu8G by flexion@oldbytes.space
       2023-04-27T17:45:00Z
       
       0 likes, 0 repeats
       
       I've finally finished the 3D printed SGI IR4 front panel with ventilation holes and it fits perfect! This took way too long to get it right but was worth the effort :)
       
 (DIR) Post #AVaKZdnuvA0PmWUQwy by flexion@oldbytes.space
       2023-05-12T16:42:47Z
       
       2 likes, 7 repeats
       
       3D printed SiliconGraphics InfiniteReality rack now also contains a NUMAlink router and 2x storage
       
 (DIR) Post #AVaKdCmpJVRp98gBQu by selea@social.linux.pizza
       2023-05-12T16:58:35Z
       
       0 likes, 0 repeats
       
       @flexion But does it run :irix: ?They look beautiful
       
 (DIR) Post #AVb8fRr5FsJyAUvwum by adamasnemesis@social.adamasnemesis.com
       2023-05-13T02:14:57Z
       
       0 likes, 0 repeats
       
       @flexion Nice.