tSet friction coefficient to 0.5 for figure 1 - cngf-pf-exp1 - experiments for first paper with continuum granular model
 (HTM) git clone git://src.adamsgaard.dk/manus_continuum_granular1_exp
 (DIR) Log
 (DIR) Files
 (DIR) Refs
 (DIR) Submodules
 (DIR) README
 (DIR) LICENSE
       ---
 (DIR) commit 507ee2dc28100ab98302558e0912eef61e00ab69
 (DIR) parent 20564827609560fcbdf9bbb93a397889d881af91
 (HTM) Author: Anders Damsgaard <anders@adamsgaard.dk>
       Date:   Mon,  8 Jul 2019 13:40:04 +0200
       
       Set friction coefficient to 0.5 for figure 1
       
       Diffstat:
         M fig1/Makefile                       |       4 ++--
       
       1 file changed, 2 insertions(+), 2 deletions(-)
       ---
 (DIR) diff --git a/fig1/Makefile b/fig1/Makefile
       t@@ -5,7 +5,7 @@ default: ../$(FIG).pdf
        
        # mimic Iverson 2010 fig 2a
        # shear-strain rate from 10^1 to 10^6 m/a
       -# friction around 0.55
       +# friction around 0.5
        sim.output00000.txt: $(BIN) Makefile
                /bin/sh -c '\
                for b in $$(printf "0.01\n0.10\n"; seq 0.20 0.20 0.90) 0.94; do \
       t@@ -13,7 +13,7 @@ sim.output00000.txt: $(BIN) Makefile
                        rm -f "$$out"; \
                        for t in $$(seq 0.0001 0.002 1.0); do \
                                printf "$$t\t" >> "$$out"; \
       -                        ./$(BIN) -f 0.55 -P 100e3 -L 1.0 --stress-ratio $$t -b $$b sim | \
       +                        ./$(BIN) -f 0.5 -P 100e3 -L 1.0 --stress-ratio $$t -b $$b sim | \
                                tail -n 1 | cut -f2 >> "$$out"; \
                done; done'