Post B6X3uj4jMUDtIdaFQe by quad@akko.quad.moe
(DIR) More posts by quad@akko.quad.moe
(DIR) Post #B6X3uj4jMUDtIdaFQe by quad@akko.quad.moe
1 likes, 0 repeats
Man, GaN power adapters are fantastic, especially now that they're getting cheap and more readily available. Even more so if you can make do with a lower wattage.Look how friggin' tiny my 20W travel adapter is, which I use to charge my Neo and my phone. It's as thin as the laptop itself and is essentially just an ungrounded schuko plug, except a bit longer.We're reaching the point where you barely need to call it a USB-C power "brick" anymore, at this point it's bordering on being just a USB-C power "plug" instead.
(DIR) Post #B6X4BmwUEmH2DRrbSy by quad@akko.quad.moe
0 likes, 0 repeats
Not to mention that unlike a plain ungrounded cable, mine has a second connector, I can run a USB-A port to it as well if I really need to.(Although this particular power adapter doesn't have the hardware to manage voltages for both at the same time. It can do 18W QC with the A port, or it can do 20W USB-PD with the C port. However if you use the A and C ports simultaneously it simply gives 5V3A, aka 15W, shared between the two ports. Which is still fine for charging two phones, but it means I can't charge my laptop with it if something is plugged into the A port)
(DIR) Post #B6X4DDAiCbwNr3CCrA by lanodan@queer.hacktivis.me
0 likes, 0 repeats
@quad reminds me that I still have some annoying wallwarts, should change those for usb-c to barrel jack adapters
(DIR) Post #B6X4QtDtAULg2TCiXY by quad@akko.quad.moe
1 likes, 0 repeats
@lanodan I've considered doing the same. This week my local electronics store has a little 100W GaN brick with three USB-C ports on sale for like 35€.Considering picking one or two of them up tomorrow, and then buying a pile of C-to-barrel adapters off AliExpress.
(DIR) Post #B6X4iaWFRnqvF5EMxU by quad@akko.quad.moe
0 likes, 0 repeats
@lanodan The only reason I haven't bothered tbh is because there's so many different shapes barrel jacks come in, and a number of my devices want odd voltages which USB-PD didn't do before PPS came along. For example my radio wants 6V, I've tried giving it 5V, but it acts weird, it needs a minimum of around 5.1-5.2V (The hardware inside it was probably designed to run off of 4x AA batteries, which are 1.5V each)But these days more and more of the affordable GaN adapters available support PPS as well.
(DIR) Post #B6X68NqJIh2HPVTkPI by fedops@fosstodon.org
0 likes, 0 repeats
@quad [looking at the fscking Lenovo 270W charger brick from a P series] uh-huh.
(DIR) Post #B6X68O34XFFC35RwIa by quad@akko.quad.moe
0 likes, 0 repeats
@fedops unfortunately i don't think china have updated their "lenovo square plug to USB-C" adapters to support more than 100W yet.But you can still get one of those for like $1, then provide your laptop with up to 100W from a much smaller GaN adapter (which you can then also use with other devices as well)Maybe china will make Lenovo adapters which go over 100W sometime soon
(DIR) Post #B6X6P21ffTJsfajOOO by quad@akko.quad.moe
0 likes, 0 repeats
@fedops straight usb-c cables are also a thing: https://www.aliexpress.com/item/1005007622764762.htmlAgain, unsure if anyone manufactures this type of cable capable of more than 100W though
(DIR) Post #B6X7EMa50LX3BlInnU by lanodan@queer.hacktivis.me
0 likes, 0 repeats
@quad thankfully most of my stuff just wants 12v
(DIR) Post #B6X8kQ21oHZB70DxPE by fedops@fosstodon.org
0 likes, 0 repeats
@quad the Ps don't support USB PD and they will not charge with anything less than a 170W "travel" charger. Even the 165W charger from the older W "workstation" series are not enough.And all that for a measly 70-90 min runtime.
(DIR) Post #B6X8kQCfAk4bdzCRyy by quad@akko.quad.moe
0 likes, 0 repeats
@fedops ouch. I used to have some P laptop at work which came with a 170W charger.And while it would complain during post that the power supply was too weak, i could still use a typical 65W adapter if i really needed to
(DIR) Post #B6X9K4sDx8SfurdqaW by quad@akko.quad.moe
1 likes, 0 repeats
@lanodan the place where i want to replace power bricks most is my network rack, because having crammed PDUs and a shelf to store all the bricks is just overly stupid.Unfortunately lots of network equipment is designed around PoE voltages, so even if it might only pull like 10W, they might still want 24V/48V or similar, which USB-PD only recently became capable of (possibly to cover this exact scenario)