(TXT) View Source
# IMAGRAPH CORPORATION
IMASCAN CRHOMA/VL, IMASCAN MONO/MONO-D/VL, IMASCAN
RGB/RGB-D/VL
Card Type Video
Chip Set Tseng Labs ET4000/W32
Maximum Onboard 2MB DRAM (Memory configuration on the Imascan
Memory Mono/Mono-D/VL is unidentified)
Data Bus 32-bit VESA Local Bus
Video Types XVGA
Supported
Highest 1280 x 1024
Resolution
Supported
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Label | Function | Label |
|-------------------+-------+------------------------+-------|
| VGA Out | J1 | Daughter board | J4 |
| | | connector | |
|-------------------+-------+------------------------+-------|
| Capture video in | J2 | Daughter board | J5 |
| | | connector | |
|-------------------+-------+------------------------+-------|
| VGA feature | J3 | | |
| connector | | | |
|------------------------------------------------------------|
| Note: The exact # of pins on J5 is unidentified. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Setting | Label | Position |
|--------------------------------+-------+-------------------|
| » | IRQ 2/9 enabled | JP1 | Pins 1 & 2 closed |
|---+----------------------------+-------+-------------------|
| | Any IRQ disabled | JP1 | Pins 2 & 3 closed |
+------------------------------------------------------------+
(IMG) IMG 2
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Label | Function | Label |
|----------------------+-------+---------------------+-------|
| Daughter board | J1 | Daughter board | J6 |
| connector | | connector | |
|------------------------------------------------------------|
| Note: The exact # of pins on J6 is unidentified. |
+------------------------------------------------------------+
(IMG) IMG 3
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Label | Function | Label |
|-----------------------+--------+-------------------+-------|
| Daughter board | P1 | Daughter board | P5 |
| connector | | connector | |
|-----------------------+--------+-------------------+-------|
| Digital port | P2 | | |
|------------------------------------------------------------|
| Note: The exact # of pins on P2 & P5 is unidentified. |
+------------------------------------------------------------+
MONO/MONO-D DAUGHTER BOARD JUMPER CONFIGURATION
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Setting | Label | Position |
|-------------------------------------+-------+--------------|
| » | Factory configured - do not | J1 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | J2 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | J3 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | J4 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | J5 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | J6 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Video1 75ohm termination | J7 | Pins 1 & 2 |
| | enabled | | closed |
|---+---------------------------------+-------+--------------|
| | Video1 termination disabled | J7 | Pins 2 & 3 |
| | | | closed |
|---+---------------------------------+-------+--------------|
| » | Video2 75ohm termination | J8 | Pins 1 & 2 |
| | enabled | | closed |
|---+---------------------------------+-------+--------------|
| | Video2 termination disabled | J8 | Pins 2 & 3 |
| | | | closed |
|---+---------------------------------+-------+--------------|
| » | Video3 75ohm termination | J9 | Pins 1 & 2 |
| | enabled | | closed |
|---+---------------------------------+-------+--------------|
| | Video3 termination disabled | J9 | Pins 2 & 3 |
| | | | closed |
|---+---------------------------------+-------+--------------|
| » | Video4 75ohm termination | J10 | Pins 1 & 2 |
| | enabled | | closed |
|---+---------------------------------+-------+--------------|
| | Video4 termination disabled | J10 | Pins 2 & 3 |
| | | | closed |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | J11 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | J12 | Unidentified |
| | alter | | |
|------------------------------------------------------------|
| Note: J1 - J3 sets the "Bus Select", J4 sets the |
| "Field Invert", J5 & J6 sets the "Board Select", & |
| J11 & J12 sets the "Termination". |
+------------------------------------------------------------+
RGB/RGB-D DAUGHTER BOARD JUMPER CONFIGURATION
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Setting | Label | Position |
|-------------------------------------+-------+--------------|
| » | Factory configured - do not | J1 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | J2 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | J3 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | J4 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | J5 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | J6 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Red1 75ohm termination enabled | J7 | Pins 1 & 2 |
| | | | closed |
|---+---------------------------------+-------+--------------|
| | Red1 termination disabled | J7 | Pins 2 & 3 |
| | | | closed |
|---+---------------------------------+-------+--------------|
| » | Green1 75ohm termination | J8 | Pins 1 & 2 |
| | enabled | | closed |
|---+---------------------------------+-------+--------------|
| | Green1 termination disabled | J8 | Pins 2 & 3 |
| | | | closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS (CON’T) |
|------------------------------------------------------------|
| Setting | Label | Position |
|----------------------------------------+-------+-----------|
| » | Blue1 75ohm termination enabled | J9 | Pins 1 & |
| | | | 2 closed |
|---+------------------------------------+-------+-----------|
| | Blue1 termination disabled | J9 | Pins 2 & |
| | | | 3 closed |
|---+------------------------------------+-------+-----------|
| » | Red2 75ohm termination enabled | J10 | Pins 1 & |
| | | | 2 closed |
|---+------------------------------------+-------+-----------|
| | Red2 termination disabled | J10 | Pins 2 & |
| | | | 3 closed |
|---+------------------------------------+-------+-----------|
| » | Green2 75ohm termination enabled | J11 | Pins 1 & |
| | | | 2 closed |
|---+------------------------------------+-------+-----------|
| | Green2 termination disabled | J11 | Pins 2 & |
| | | | 3 closed |
|---+------------------------------------+-------+-----------|
| » | Blue2 75ohm termination enabled | J12 | Pins 1 & |
| | | | 2 closed |
|---+------------------------------------+-------+-----------|
| | Blue2 termination disabled | J12 | Pins 2 & |
| | | | 3 closed |
|------------------------------------------------------------|
| Note: J1 - J3 sets the "Bus Select", J4 sets the |
| "Field Invert", & J5 & J6 sets the "Board Select". |
+------------------------------------------------------------+