IMAGRAPH CORPORATION ==================== IMASCAN CRHOMA/VL, IMASCAN MONO/MONO-D/VL, IMASCAN RGB/RGB-D/VL Card Type Video Chip Set Tseng Labs ET4000/W32 Maximum Onboard 2MB DRAM (Memory configuration on the Imascan Memory Mono/Mono-D/VL is unidentified) Data Bus 32-bit VESA Local Bus Video Types XVGA Supported Highest 1280 x 1024 Resolution Supported +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |-------------------+-------+------------------------+-------| | VGA Out | J1 | Daughter board | J4 | | | | connector | | |-------------------+-------+------------------------+-------| | Capture video in | J2 | Daughter board | J5 | | | | connector | | |-------------------+-------+------------------------+-------| | VGA feature | J3 | | | | connector | | | | |------------------------------------------------------------| | Note: The exact # of pins on J5 is unidentified. | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Setting | Label | Position | |--------------------------------+-------+-------------------| |>> | IRQ 2/9 enabled | JP1 | Pins 1 & 2 closed | |---+----------------------------+-------+-------------------| | | Any IRQ disabled | JP1 | Pins 2 & 3 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |----------------------+-------+---------------------+-------| | Daughter board | J1 | Daughter board | J6 | | connector | | connector | | |------------------------------------------------------------| | Note: The exact # of pins on J6 is unidentified. | +------------------------------------------------------------+ +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |-----------------------+--------+-------------------+-------| | Daughter board | P1 | Daughter board | P5 | | connector | | connector | | |-----------------------+--------+-------------------+-------| | Digital port | P2 | | | |------------------------------------------------------------| | Note: The exact # of pins on P2 & P5 is unidentified. | +------------------------------------------------------------+ MONO/MONO-D DAUGHTER BOARD JUMPER CONFIGURATION +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Setting | Label | Position | |-------------------------------------+-------+--------------| |>> | Factory configured - do not | J1 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | J2 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | J3 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | J4 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | J5 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | J6 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Video1 75ohm termination | J7 | Pins 1 & 2 | | | enabled | | closed | |---+---------------------------------+-------+--------------| | | Video1 termination disabled | J7 | Pins 2 & 3 | | | | | closed | |---+---------------------------------+-------+--------------| |>> | Video2 75ohm termination | J8 | Pins 1 & 2 | | | enabled | | closed | |---+---------------------------------+-------+--------------| | | Video2 termination disabled | J8 | Pins 2 & 3 | | | | | closed | |---+---------------------------------+-------+--------------| |>> | Video3 75ohm termination | J9 | Pins 1 & 2 | | | enabled | | closed | |---+---------------------------------+-------+--------------| | | Video3 termination disabled | J9 | Pins 2 & 3 | | | | | closed | |---+---------------------------------+-------+--------------| |>> | Video4 75ohm termination | J10 | Pins 1 & 2 | | | enabled | | closed | |---+---------------------------------+-------+--------------| | | Video4 termination disabled | J10 | Pins 2 & 3 | | | | | closed | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | J11 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | J12 | Unidentified | | | alter | | | |------------------------------------------------------------| | Note: J1 - J3 sets the "Bus Select", J4 sets the | | "Field Invert", J5 & J6 sets the "Board Select", & | | J11 & J12 sets the "Termination". | +------------------------------------------------------------+ RGB/RGB-D DAUGHTER BOARD JUMPER CONFIGURATION +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Setting | Label | Position | |-------------------------------------+-------+--------------| |>> | Factory configured - do not | J1 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | J2 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | J3 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | J4 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | J5 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Factory configured - do not | J6 | Unidentified | | | alter | | | |---+---------------------------------+-------+--------------| |>> | Red1 75ohm termination enabled | J7 | Pins 1 & 2 | | | | | closed | |---+---------------------------------+-------+--------------| | | Red1 termination disabled | J7 | Pins 2 & 3 | | | | | closed | |---+---------------------------------+-------+--------------| |>> | Green1 75ohm termination | J8 | Pins 1 & 2 | | | enabled | | closed | |---+---------------------------------+-------+--------------| | | Green1 termination disabled | J8 | Pins 2 & 3 | | | | | closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS (CON'T) | |------------------------------------------------------------| | Setting | Label | Position | |----------------------------------------+-------+-----------| |>> | Blue1 75ohm termination enabled | J9 | Pins 1 & | | | | | 2 closed | |---+------------------------------------+-------+-----------| | | Blue1 termination disabled | J9 | Pins 2 & | | | | | 3 closed | |---+------------------------------------+-------+-----------| |>> | Red2 75ohm termination enabled | J10 | Pins 1 & | | | | | 2 closed | |---+------------------------------------+-------+-----------| | | Red2 termination disabled | J10 | Pins 2 & | | | | | 3 closed | |---+------------------------------------+-------+-----------| |>> | Green2 75ohm termination enabled | J11 | Pins 1 & | | | | | 2 closed | |---+------------------------------------+-------+-----------| | | Green2 termination disabled | J11 | Pins 2 & | | | | | 3 closed | |---+------------------------------------+-------+-----------| |>> | Blue2 75ohm termination enabled | J12 | Pins 1 & | | | | | 2 closed | |---+------------------------------------+-------+-----------| | | Blue2 termination disabled | J12 | Pins 2 & | | | | | 3 closed | |------------------------------------------------------------| | Note: J1 - J3 sets the "Bus Select", J4 sets the | | "Field Invert", & J5 & J6 sets the "Board Select". | +------------------------------------------------------------+