(TXT) View Source
# SIMPLE TECHNOLOGY, INC.
COMMUNICATOR 14.4, STI-FAX/14.4V
Card Type Modem (asynchronous)
Chipset Unidentified
I/O Options Voice
Maximum Data Rate 14.4Kbps
Maximum Fax Rate 14.4Kbps
Data Modulation Bell 103A, 212A
ITU-T V.21, V.22bis, V.23, V.32,
V.32bis
Fax Modulation ITU-T V.17, V.27ter, V.29
Error MNP5, MNP10EC, V.42, V.42bis
Correction/Compression
Fax Class Class I & II
Data Bus PCMCIA Type II
53851
+------------------------------------------------------------+
| SUPPORTED STANDARD COMMANDS |
|------------------------------------------------------------|
| Basic AT Commands |
|------------------------------------------------------------|
| +++, ‘comma’, A/ |
|------------------------------------------------------------|
| A, B, E, H, L, M, N, O, P, Q, T, V, W, X, Y, Z |
|------------------------------------------------------------|
| &C, &D, &F, &G, &K, &P, &Q, &R, &S, &T, &V, &W, &Y, &Z |
|------------------------------------------------------------|
| Extended AT Commands |
|------------------------------------------------------------|
| \A, \B, \G, \K, \N |
|------------------------------------------------------------|
| %C, %E, %L, %Q |
|------------------------------------------------------------|
| Special AT Commands |
|------------------------------------------------------------|
| :E, *H, -K, )M, @M, +MS, -Q |
|------------------------------------------------------------|
| S-Registers |
|------------------------------------------------------------|
| S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, |
| S14, S16, S18, S21, S22, S23, S24, S25 |
|------------------------------------------------------------|
| S26, S27, S29, S30, S31, S32, S33, S36, S38, S46, S48, |
| S82, S86, S95, S201 |
|------------------------------------------------------------|
| Note: See MHI help file for complete information. |
+------------------------------------------------------------+
Proprietary AT Command Set
+------------------------------------------------------------+
| DISTINCTIVE RING |
|------------------------------------------------------------|
| Format: | AT [cmds] -SDRn [cmds] |
|----------------+-------------------------------------------|
| Default: | Unidentified |
|----------------+-------------------------------------------|
| Range: | 0 - 7 |
|----------------+-------------------------------------------|
| Description: | Selects which distinctive ring signals |
| | the modem will respond to. |
|------------------------------------------------------------|
| Bit | Value | Function |
|----------+-------+-----------------------------------------|
| 0 | 0 | Do not respond to distinctive ring type |
| | | 1. |
| | 1 | |
| | | Respond to distinctive ring type 1. |
|----------+-------+-----------------------------------------|
| 1 | 0 | Do not respond to distinctive ring type |
| | | 2. |
| | 1 | |
| | | Respond to distinctive ring type 2. |
|----------+-------+-----------------------------------------|
| 2 | 0 | Do not respond to distinctive ring type |
| | | 3. |
| | 1 | |
| | | Respond to distinctive ring type 3. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| FIRMWARE DOWNLOAD |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] ** |
|--------------+---------------------------------------------|
| Description: | Downloads new code to the firmware flash |
| | memory in ASCII format. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| MNP10EC MODE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] -SEC=m,n [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects whether the modem will attempt to |
| | use MNP10EC mode during the handshaking |
| | sequence. |
|------------------------------------------------------------|
| Command | Function |
|---------------+--------------------------------------------|
| m=0 | MNP10EC handshaking disabled unless a V.34 |
| | connection is attempted via a cellular |
| | line. |
|---------------+--------------------------------------------|
| í m=1 | MNP10EC handshaking enabled. |
|---------------+--------------------------------------------|
| n | Default: | Unidentified |
|---------------+------------------+-------------------------|
| | Range: | -10 to -30 |
|---------------+------------------+-------------------------|
| | Unit: | -1 dBm |
|---------------+------------------+-------------------------|
| | Description: | Sets the initial |
| | | transmission level. |
+------------------------------------------------------------+
See SIMPLE TECHNOLOGY, INC. 28.8 COMMUNICATOR for a full command