SIMPLE TECHNOLOGY, INC. ======================= COMMUNICATOR 14.4, STI-FAX/14.4V Card Type Modem (asynchronous) Chipset Unidentified I/O Options Voice Maximum Data Rate 14.4Kbps Maximum Fax Rate 14.4Kbps Data Modulation Bell 103A, 212A ITU-T V.21, V.22bis, V.23, V.32, V.32bis Fax Modulation ITU-T V.17, V.27ter, V.29 Error MNP5, MNP10EC, V.42, V.42bis Correction/Compression Fax Class Class I & II Data Bus PCMCIA Type II 53851 +------------------------------------------------------------+ | SUPPORTED STANDARD COMMANDS | |------------------------------------------------------------| | Basic AT Commands | |------------------------------------------------------------| | +++, 'comma', A/ | |------------------------------------------------------------| | A, B, E, H, L, M, N, O, P, Q, T, V, W, X, Y, Z | |------------------------------------------------------------| | &C, &D, &F, &G, &K, &P, &Q, &R, &S, &T, &V, &W, &Y, &Z | |------------------------------------------------------------| | Extended AT Commands | |------------------------------------------------------------| | \A, \B, \G, \K, \N | |------------------------------------------------------------| | %C, %E, %L, %Q | |------------------------------------------------------------| | Special AT Commands | |------------------------------------------------------------| | :E, *H, -K, )M, @M, +MS, -Q | |------------------------------------------------------------| | S-Registers | |------------------------------------------------------------| | S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, | | S14, S16, S18, S21, S22, S23, S24, S25 | |------------------------------------------------------------| | S26, S27, S29, S30, S31, S32, S33, S36, S38, S46, S48, | | S82, S86, S95, S201 | |------------------------------------------------------------| | Note: See MHI help file for complete information. | +------------------------------------------------------------+ Proprietary AT Command Set +------------------------------------------------------------+ | DISTINCTIVE RING | |------------------------------------------------------------| | Format: | AT [cmds] -SDRn [cmds] | |----------------+-------------------------------------------| | Default: | Unidentified | |----------------+-------------------------------------------| | Range: | 0 - 7 | |----------------+-------------------------------------------| | Description: | Selects which distinctive ring signals | | | the modem will respond to. | |------------------------------------------------------------| | Bit | Value | Function | |----------+-------+-----------------------------------------| | 0 | 0 | Do not respond to distinctive ring type | | | | 1. | | | 1 | | | | | Respond to distinctive ring type 1. | |----------+-------+-----------------------------------------| | 1 | 0 | Do not respond to distinctive ring type | | | | 2. | | | 1 | | | | | Respond to distinctive ring type 2. | |----------+-------+-----------------------------------------| | 2 | 0 | Do not respond to distinctive ring type | | | | 3. | | | 1 | | | | | Respond to distinctive ring type 3. | +------------------------------------------------------------+ +------------------------------------------------------------+ | FIRMWARE DOWNLOAD | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] ** | |--------------+---------------------------------------------| | Description: | Downloads new code to the firmware flash | | | memory in ASCII format. | +------------------------------------------------------------+ +------------------------------------------------------------+ | MNP10EC MODE | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] -SEC=m,n [cmds] | |--------------+---------------------------------------------| | Description: | Selects whether the modem will attempt to | | | use MNP10EC mode during the handshaking | | | sequence. | |------------------------------------------------------------| | Command | Function | |---------------+--------------------------------------------| | m=0 | MNP10EC handshaking disabled unless a V.34 | | | connection is attempted via a cellular | | | line. | |---------------+--------------------------------------------| | i m=1 | MNP10EC handshaking enabled. | |---------------+--------------------------------------------| | n | Default: | Unidentified | |---------------+------------------+-------------------------| | | Range: | -10 to -30 | |---------------+------------------+-------------------------| | | Unit: | -1 dBm | |---------------+------------------+-------------------------| | | Description: | Sets the initial | | | | transmission level. | +------------------------------------------------------------+ See SIMPLE TECHNOLOGY, INC. 28.8 COMMUNICATOR for a full command