(TXT) View Source
# POWERCOM AMERICA, INC.
PM33V14I (CIRRUS LOGIC)
Card Type Modem (asynchronous)
Chipset Cirrus Logic
I/O Options Voice, microphone in, speaker out
Maximum Data Rate 33.6Kbps
Maximum Fax Rate 14.4Kbps
Data Modulation Bell 103A/212A
ITU-T V.21, V.22, V.22bis, V.23, V.32,
V.32bis, V.34
Fax Modulation Unidentified
Error MNP5, V.42, V.42bis
Correction/Compression
Fax Class Unidentified
Data Bus 8-bit ISA
Card Size Full height, one-third length
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Label | Function | Label |
|------------------------+-------+-------------------+-------|
| Telephone line in | CN1 | Speaker out | CN3 |
|------------------------+-------+-------------------+-------|
| Telephone line out | CN2 | Microphone in | CN4 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Setting | Label | Position |
|-------------------------------------+-------+--------------|
| í Factory configured - do not alter | J8 | Unidentified |
|-------------------------------------+-------+--------------|
| í Factory configured - do not alter | J9 | Unidentified |
|-------------------------------------+-------+--------------|
| í Factory configured - do not alter | J10 | Unidentified |
|-------------------------------------+-------+--------------|
| í Factory configured - do not alter | J11 | Unidentified |
|-------------------------------------+-------+--------------|
| í Factory configured - do not alter | J12 | Unidentified |
|-------------------------------------+-------+--------------|
| í Factory configured - do not alter | J13 | Unidentified |
|-------------------------------------+-------+--------------|
| í Factory configured - do not alter | J14 | Unidentified |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SERIAL PORT ADDRESS SELECTION |
|------------------------------------------------------------|
| Setting | J1 | J2 | J3 | J4 |
|--------------+-----------+-----------+----------+----------|
| 3F8h (COM1:) | Closed | Closed | Open | Open |
|--------------+-----------+-----------+----------+----------|
| 2F8h (COM2:) | Closed | Open | Open | Closed |
|--------------+-----------+-----------+----------+----------|
| 3E8h (COM3:) | Open | Closed | Closed | Open |
|--------------+-----------+-----------+----------+----------|
| 2E8h (COM4:) | Open | Open | Closed | Closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| INTERRUPT SELECTION |
|------------------------------------------------------------|
| Setting | J5 | J6 | J7 |
|---------------+--------------+--------------+--------------|
| 3 | Closed | Open | Open |
|---------------+--------------+--------------+--------------|
| í 4 | Open | Closed | Open |
|---------------+--------------+--------------+--------------|
| 5 | Open | Open | Closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SUPPORTED STANDARD COMMANDS |
|------------------------------------------------------------|
| Basic AT Commands |
|------------------------------------------------------------|
| +++, ‘comma’, A/ |
|------------------------------------------------------------|
| A, D, E, H, L, M, N, O, P, Q, T, V, X, Y, Z |
|------------------------------------------------------------|
| &C, &D, &F, &G, &K, &P, &Q, &R, &S, &T, &V, &W, &Y, &Z |
|------------------------------------------------------------|
| Extended AT Commands |
|------------------------------------------------------------|
| \A, \B, \C, \G, \J, \K, \N, \O, \Q, \T, \U, \V, \X, \Y, \Z |
|------------------------------------------------------------|
| %A, %C, %E, %G |
|------------------------------------------------------------|
| Special AT Commands |
|------------------------------------------------------------|
| -C, "H, -J, +MS, "O |
|------------------------------------------------------------|
| S-Registers |
|------------------------------------------------------------|
| S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, |
| S18, S25, S26, S30 |
|------------------------------------------------------------|
| Note: See MHI help file for complete information. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| UNIDENTIFIED COMMANDS |
|------------------------------------------------------------|
| Command | Default |
|-----------------------------+------------------------------|
| S14 | Read-only |
|-----------------------------+------------------------------|
| S16 | Read-only |
|-----------------------------+------------------------------|
| S21 | Read-only |
|-----------------------------+------------------------------|
| S22 | Read-only |
|-----------------------------+------------------------------|
| S23 | Read-only |
|-----------------------------+------------------------------|
| S27 | Read-only |
|-----------------------------+------------------------------|
| S31 | Read-only |
|-----------------------------+------------------------------|
| S33 | 10 |
|-----------------------------+------------------------------|
| S37 | 0 |
+------------------------------------------------------------+
Proprietary AT Command Set
+------------------------------------------------------------+
| COMMUNICATION PROTOCOLS |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] Bn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects the communication protocol for |
| | 1200bps data calls. |
|--------------+---------------------------------------------|
| Command | Protocol |
|--------------+---------------------------------------------|
| B0 | Modem will use ITU-T V.22 at 1200bps. |
|--------------+---------------------------------------------|
| B1 | Modem will use Bell 212A 1200bps. |
|--------------+---------------------------------------------|
| B2 | Modem will use V.23 at 1200/75bps. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DISPLAY CHIPSET MANUFACTURER |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] +GMI? [cmds] |
|--------------+---------------------------------------------|
| Description: | Displays the chipset manufacturer’s name. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DISPLAY CHIPSET MODEL NAME |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] +GMM? [cmds] |
|--------------+---------------------------------------------|
| Description: | Displays the model name of the modem's |
| | chipset. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DISPLAY CHIPSET REVISION |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] +GMR? [cmds] |
|--------------+---------------------------------------------|
| Description: | Displays the revision level of the modem's |
| | chipset. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DISPLAY INFORMATION |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] In [cmds] |
|--------------+---------------------------------------------|
| Description: | Displays information requested about the |
| | modem. |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| I0 | Displays product identification code. |
|--------------+---------------------------------------------|
| I1 | Displays firmware version. |
|--------------+---------------------------------------------|
| I2 | Tests and displays ROM checksum result. |
|--------------+---------------------------------------------|
| I3 | Displays chipset manufacturer. |
|--------------+---------------------------------------------|
| I4 | Displays chipset feature bitmap. |
|--------------+---------------------------------------------|
| | Bit | Value | Function |
|--------------+------+-------+------------------------------|
| | 0 | 0 | Modem uses Hayes (Patent |
| | | | ‘302) escape sequence. |
| | | 1 | |
| | | | Modem uses TIES (+++AT |
| | | | [cmds]<CR>) escape sequence. |
|--------------+------+-------+------------------------------|
| | 1 | 0 | Modem does not contain |
| | | | V.42/MNP firmware. |
| | | 1 | |
| | | | Modem contains V.42/MNP |
| | | | firmware. |
|--------------+------+-------+------------------------------|
| | 5, 2 | 00 | Modem has serial interface. |
| | | | |
| | | 01 | Modem has parallel |
| | | | interface. |
| | | 10 | |
| | | | Modem has PCMCIA interface. |
|--------------+------+-------+------------------------------|
| | 4, 3 | 00 | Modem does not have SRAM |
| | | | installed. |
| | | 10 | |
| | | | Modem has 8K x 8 SRAMs |
| | | 11 | installed. |
| | | | |
| | | | Modem has 32K x 8 SRAMs |
| | | | installed. |
|--------------+------+-------+------------------------------|
| | 6 | 0 | Modem does not support |
| | | | Plug-N-Play. |
| | | 1 | |
| | | | Modem supports Plug-N-Play. |
|--------------+---------------------------------------------|
| I6 | Displays country code. |
|--------------+---------------------------------------------|
| | Value | Meaning |
|--------------+--------------+------------------------------|
| | FR | Modem set for France. |
|--------------+--------------+------------------------------|
| | GR | Modem set for Germany. |
|--------------+--------------+------------------------------|
| | IT | Modem set for Italy. |
|--------------+--------------+------------------------------|
| | JP | Modem set for Japan. |
|--------------+--------------+------------------------------|
| | NT | Modem set for the |
| | | Netherlands. |
|--------------+--------------+------------------------------|
| | UK | Modem set for Great Britain. |
|--------------+--------------+------------------------------|
| | US | Modem set for the United |
| | | States. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DISPLAY INFORMATION (CON'T) |
|------------------------------------------------------------|
| Command | Function |
|----------+-------------------------------------------------|
| I7 | Displays board firmware version. |
|----------+-------------------------------------------------|
| I8 | Displays firmware feature bitmap. |
|----------+-------------------------------------------------|
| | Bit | Value | Function |
|----------+-----+-------+-----------------------------------|
| | 0 | 0 | Modem supports VoiceView. |
| | | | |
| | | 1 | Modem does not support VoiceView. |
|----------+-----+-------+-----------------------------------|
| | 1 | 0 | Modem supports DSVD. |
| | | | |
| | | 1 | Modem does not support DSVD. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| EXTENDED RESULT CODES |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] Wn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects the format of the CONNECT result |
| | code. |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| í W0 | CONNECT result codes to report DTE speed. |
|--------------+---------------------------------------------|
| W1 | CONNECT result codes to report DTE speed. |
|--------------+---------------------------------------------|
| W2 | CONNECT result codes to report DCE speed. |
|--------------+---------------------------------------------|
| W3 | CONNECT result codes to report DTE and DCE |
| | speeds, modulation, error |
| | correction/compression. |
+------------------------------------------------------------+