POWERCOM AMERICA, INC. ====================== PM33V14I (CIRRUS LOGIC) Card Type Modem (asynchronous) Chipset Cirrus Logic I/O Options Voice, microphone in, speaker out Maximum Data Rate 33.6Kbps Maximum Fax Rate 14.4Kbps Data Modulation Bell 103A/212A ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34 Fax Modulation Unidentified Error MNP5, V.42, V.42bis Correction/Compression Fax Class Unidentified Data Bus 8-bit ISA Card Size Full height, one-third length +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |------------------------+-------+-------------------+-------| | Telephone line in | CN1 | Speaker out | CN3 | |------------------------+-------+-------------------+-------| | Telephone line out | CN2 | Microphone in | CN4 | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Setting | Label | Position | |-------------------------------------+-------+--------------| | i Factory configured - do not alter | J8 | Unidentified | |-------------------------------------+-------+--------------| | i Factory configured - do not alter | J9 | Unidentified | |-------------------------------------+-------+--------------| | i Factory configured - do not alter | J10 | Unidentified | |-------------------------------------+-------+--------------| | i Factory configured - do not alter | J11 | Unidentified | |-------------------------------------+-------+--------------| | i Factory configured - do not alter | J12 | Unidentified | |-------------------------------------+-------+--------------| | i Factory configured - do not alter | J13 | Unidentified | |-------------------------------------+-------+--------------| | i Factory configured - do not alter | J14 | Unidentified | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT ADDRESS SELECTION | |------------------------------------------------------------| | Setting | J1 | J2 | J3 | J4 | |--------------+-----------+-----------+----------+----------| | 3F8h (COM1:) | Closed | Closed | Open | Open | |--------------+-----------+-----------+----------+----------| | 2F8h (COM2:) | Closed | Open | Open | Closed | |--------------+-----------+-----------+----------+----------| | 3E8h (COM3:) | Open | Closed | Closed | Open | |--------------+-----------+-----------+----------+----------| | 2E8h (COM4:) | Open | Open | Closed | Closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | INTERRUPT SELECTION | |------------------------------------------------------------| | Setting | J5 | J6 | J7 | |---------------+--------------+--------------+--------------| | 3 | Closed | Open | Open | |---------------+--------------+--------------+--------------| | i 4 | Open | Closed | Open | |---------------+--------------+--------------+--------------| | 5 | Open | Open | Closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | SUPPORTED STANDARD COMMANDS | |------------------------------------------------------------| | Basic AT Commands | |------------------------------------------------------------| | +++, 'comma', A/ | |------------------------------------------------------------| | A, D, E, H, L, M, N, O, P, Q, T, V, X, Y, Z | |------------------------------------------------------------| | &C, &D, &F, &G, &K, &P, &Q, &R, &S, &T, &V, &W, &Y, &Z | |------------------------------------------------------------| | Extended AT Commands | |------------------------------------------------------------| | \A, \B, \C, \G, \J, \K, \N, \O, \Q, \T, \U, \V, \X, \Y, \Z | |------------------------------------------------------------| | %A, %C, %E, %G | |------------------------------------------------------------| | Special AT Commands | |------------------------------------------------------------| | -C, "H, -J, +MS, "O | |------------------------------------------------------------| | S-Registers | |------------------------------------------------------------| | S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, | | S18, S25, S26, S30 | |------------------------------------------------------------| | Note: See MHI help file for complete information. | +------------------------------------------------------------+ +------------------------------------------------------------+ | UNIDENTIFIED COMMANDS | |------------------------------------------------------------| | Command | Default | |-----------------------------+------------------------------| | S14 | Read-only | |-----------------------------+------------------------------| | S16 | Read-only | |-----------------------------+------------------------------| | S21 | Read-only | |-----------------------------+------------------------------| | S22 | Read-only | |-----------------------------+------------------------------| | S23 | Read-only | |-----------------------------+------------------------------| | S27 | Read-only | |-----------------------------+------------------------------| | S31 | Read-only | |-----------------------------+------------------------------| | S33 | 10 | |-----------------------------+------------------------------| | S37 | 0 | +------------------------------------------------------------+ Proprietary AT Command Set +------------------------------------------------------------+ | COMMUNICATION PROTOCOLS | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] Bn [cmds] | |--------------+---------------------------------------------| | Description: | Selects the communication protocol for | | | 1200bps data calls. | |--------------+---------------------------------------------| | Command | Protocol | |--------------+---------------------------------------------| | B0 | Modem will use ITU-T V.22 at 1200bps. | |--------------+---------------------------------------------| | B1 | Modem will use Bell 212A 1200bps. | |--------------+---------------------------------------------| | B2 | Modem will use V.23 at 1200/75bps. | +------------------------------------------------------------+ +------------------------------------------------------------+ | DISPLAY CHIPSET MANUFACTURER | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] +GMI? [cmds] | |--------------+---------------------------------------------| | Description: | Displays the chipset manufacturer's name. | +------------------------------------------------------------+ +------------------------------------------------------------+ | DISPLAY CHIPSET MODEL NAME | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] +GMM? [cmds] | |--------------+---------------------------------------------| | Description: | Displays the model name of the modem's | | | chipset. | +------------------------------------------------------------+ +------------------------------------------------------------+ | DISPLAY CHIPSET REVISION | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] +GMR? [cmds] | |--------------+---------------------------------------------| | Description: | Displays the revision level of the modem's | | | chipset. | +------------------------------------------------------------+ +------------------------------------------------------------+ | DISPLAY INFORMATION | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] In [cmds] | |--------------+---------------------------------------------| | Description: | Displays information requested about the | | | modem. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | I0 | Displays product identification code. | |--------------+---------------------------------------------| | I1 | Displays firmware version. | |--------------+---------------------------------------------| | I2 | Tests and displays ROM checksum result. | |--------------+---------------------------------------------| | I3 | Displays chipset manufacturer. | |--------------+---------------------------------------------| | I4 | Displays chipset feature bitmap. | |--------------+---------------------------------------------| | | Bit | Value | Function | |--------------+------+-------+------------------------------| | | 0 | 0 | Modem uses Hayes (Patent | | | | | '302) escape sequence. | | | | 1 | | | | | | Modem uses TIES (+++AT | | | | | [cmds]) escape sequence. | |--------------+------+-------+------------------------------| | | 1 | 0 | Modem does not contain | | | | | V.42/MNP firmware. | | | | 1 | | | | | | Modem contains V.42/MNP | | | | | firmware. | |--------------+------+-------+------------------------------| | | 5, 2 | 00 | Modem has serial interface. | | | | | | | | | 01 | Modem has parallel | | | | | interface. | | | | 10 | | | | | | Modem has PCMCIA interface. | |--------------+------+-------+------------------------------| | | 4, 3 | 00 | Modem does not have SRAM | | | | | installed. | | | | 10 | | | | | | Modem has 8K x 8 SRAMs | | | | 11 | installed. | | | | | | | | | | Modem has 32K x 8 SRAMs | | | | | installed. | |--------------+------+-------+------------------------------| | | 6 | 0 | Modem does not support | | | | | Plug-N-Play. | | | | 1 | | | | | | Modem supports Plug-N-Play. | |--------------+---------------------------------------------| | I6 | Displays country code. | |--------------+---------------------------------------------| | | Value | Meaning | |--------------+--------------+------------------------------| | | FR | Modem set for France. | |--------------+--------------+------------------------------| | | GR | Modem set for Germany. | |--------------+--------------+------------------------------| | | IT | Modem set for Italy. | |--------------+--------------+------------------------------| | | JP | Modem set for Japan. | |--------------+--------------+------------------------------| | | NT | Modem set for the | | | | Netherlands. | |--------------+--------------+------------------------------| | | UK | Modem set for Great Britain. | |--------------+--------------+------------------------------| | | US | Modem set for the United | | | | States. | +------------------------------------------------------------+ +------------------------------------------------------------+ | DISPLAY INFORMATION (CON'T) | |------------------------------------------------------------| | Command | Function | |----------+-------------------------------------------------| | I7 | Displays board firmware version. | |----------+-------------------------------------------------| | I8 | Displays firmware feature bitmap. | |----------+-------------------------------------------------| | | Bit | Value | Function | |----------+-----+-------+-----------------------------------| | | 0 | 0 | Modem supports VoiceView. | | | | | | | | | 1 | Modem does not support VoiceView. | |----------+-----+-------+-----------------------------------| | | 1 | 0 | Modem supports DSVD. | | | | | | | | | 1 | Modem does not support DSVD. | +------------------------------------------------------------+ +------------------------------------------------------------+ | EXTENDED RESULT CODES | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] Wn [cmds] | |--------------+---------------------------------------------| | Description: | Selects the format of the CONNECT result | | | code. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | i W0 | CONNECT result codes to report DTE speed. | |--------------+---------------------------------------------| | W1 | CONNECT result codes to report DTE speed. | |--------------+---------------------------------------------| | W2 | CONNECT result codes to report DCE speed. | |--------------+---------------------------------------------| | W3 | CONNECT result codes to report DTE and DCE | | | speeds, modulation, error | | | correction/compression. | +------------------------------------------------------------+