(TXT) View Source
# MOTOROLA
VOICESURFR 28800 INTERNAL
Card Type Modem (asynchronous)
Chip Set Unidentified
I/O Options Speaker out, microphone
Maximum Modem Rate 28.8Kbps
Maximum Fax Rate 14.4Kbps
Data Modulation Protocol Unidentified
Fax Modulation Protocol Unidentified
Error Correction/Compression Unidentified
Fax Class Unidentified
Data Bus 16-bit ISA
Card Size Half-length, full-height card
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Label | Function | Label |
|------------------------------------------------------------|
| Line out (RJ-11) | CN1 | Speaker out | CN3 |
|-----------------------------+---------+-------------+------|
| Line in (RJ-11) | CN2 | Microphone | CN4 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Label | Position |
|-------------------------------------+-------+--------------|
| í Factory configured - do not alter | S6 | Unidentified |
|-------------------------------------+-------+--------------|
| í Factory configured - do not alter | S7 | Unidentified |
|-------------------------------------+-------+--------------|
| í Factory configured - do not alter | S8 | Unidentified |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SERIAL PORT ADDRESS |
|------------------------------------------------------------|
| Setting | S1 | S2 |
|--------------------+-------------------+-------------------|
| COM1 (3F8h) | Open | Open |
|--------------------+-------------------+-------------------|
| COM2 (2F8h) | Closed | Open |
|--------------------+-------------------+-------------------|
| í COM3 (3E8h) | Open | Closed |
|--------------------+-------------------+-------------------|
| COM4 (2E8h) | Closed | Closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| INTERRUPT |
|------------------------------------------------------------|
| Setting | S3 | S4 | S5 |
|---------------+--------------+--------------+--------------|
| IRQ 3 | Closed | Open | Open |
|---------------+--------------+--------------+--------------|
| IRQ 4 | Open | Closed | Open |
|---------------+--------------+--------------+--------------|
| í IRQ 5 | Open | Open | Closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| PLUG AND PLAY |
|------------------------------------------------------------|
| Plug & Play | JP10 | JP11 | JP12 | JP13 | JP14 |
|-------------+---------+---------+--------+--------+--------|
| Enabled | Closed | Closed | Closed | Open | Closed |
|-------------+---------+---------+--------+--------+--------|
| í Disabled | Open | Open | Open | Closed | Open |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SUPPORTED COMMAND SET |
|------------------------------------------------------------|
| Basic AT Commands |
|------------------------------------------------------------|
| AT, ‘+++’, A/ |
|------------------------------------------------------------|
| A, E, H, M, O, S, V, X, Y, Z |
|------------------------------------------------------------|
| &F, &V, &W, &Y, &Z |
|------------------------------------------------------------|
| Extended AT Commands |
|------------------------------------------------------------|
| \K, \Q |
|------------------------------------------------------------|
| %A, %C |
|------------------------------------------------------------|
| S Registers |
|------------------------------------------------------------|
| S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, |
| S25, S26, S38 |
|------------------------------------------------------------|
| Note: See MHI Help File for full command documentation. |
+------------------------------------------------------------+
Proprietary AT Command Set
+------------------------------------------------------------+
| AUTO FALLFORWARD/FALLBACK |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] &An [cmds] |
|--------------+---------------------------------------------|
| Description: | Controls the auto fallforward/fallback |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| í &A0 | Disable auto fallforward/fallback |
|--------------+---------------------------------------------|
| &A1 | Enable auto fallforward/fallback |
+------------------------------------------------------------+
+------------------------------------------------------------+
| CONNECTION SPEED NEGOTIATION |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] &Hn [cmds] |
|--------------+---------------------------------------------|
| Description: | Controls the connection speed negotiation |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| í &H0 | V.34 connect speed negotiation |
| | (28.8Kbps-300bps) |
|--------------+---------------------------------------------|
| &H1 | V.34 (28.8Kbps- 4800bps) |
|--------------+---------------------------------------------|
| &H2 | V.32bis automatic (14.4Kbps -300bps) |
|--------------+---------------------------------------------|
| &H3 | V.32bis only (14.4Kbps - 4800bps) |
|--------------+---------------------------------------------|
| &H4 | V.32 automatic (9600-300bps) |
|--------------+---------------------------------------------|
| &H5 | V.32 only (9600-4800bps) |
|--------------+---------------------------------------------|
| &H6 | V.22 only (2400-1200bps) |
|--------------+---------------------------------------------|
| &H7 | V.22 only (1200bps) |
|--------------+---------------------------------------------|
| &H8 | 212 only (1200bps) |
|--------------+---------------------------------------------|
| &H9 | 103 only (300bps) |
|--------------+---------------------------------------------|
| &H10 | V.21 only (300bps) |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DATA CARRIER DETECT (DCD) |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] &Cn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects whether the DCD option is enabled |
| | or disabled |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| í &C0 | DCD enabled |
|--------------+---------------------------------------------|
| &C1 | DCD enabled after carrier signal detected |
|--------------+---------------------------------------------|
| &C2 | Force DCD on and toggle DCD on disconnect |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DATA SET READY (DSR) |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] &Sn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects DSR options |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| &S0 | DSR forced high |
|--------------+---------------------------------------------|
| í &S1 | DSR high only while modem is handshaking or |
| | connected |
|--------------+---------------------------------------------|
| &S2 | DSR high only while modem is connected |
|--------------+---------------------------------------------|
| &S3 | DSR is forced high in all modes |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DATA TERMINAL READY (DTR) |
|------------------------------------------------------------|
| Type: | Configuration |
|---------------+--------------------------------------------|
| Format: | AT [cmds] &Dn [cmds] |
|---------------+--------------------------------------------|
| Description: | Selects modem response to DTR |
|------------------------------------------------------------|
| Note: The action each variant of &D causes depends on |
| the setting of &Q |
|------------------------------------------------------------|
| Command | Function |
|---------------+--------------------------------------------|
| í &D0 | Modem does not respond to DTR |
|---------------+--------------------------------------------|
| &D1 | Modem goes to command mode after DTR goes |
| | is off |
|---------------+--------------------------------------------|
| &D2 | Modem goes to command mode and disconnects |
| | (hangs up) after DTR goes off; Auto-Answer |
| | is disabled. |
|---------------+--------------------------------------------|
| &D3 | Modem is initialized after DTR goes off |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DIAL |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] D<#> [cmds] |
|--------------+---------------------------------------------|
| Description: | Dials telephone number according to any |
| | modifiers included in the string |
|--------------+---------------------------------------------|
| Note: | Any combination of modifiers can be used to |
| | produce the desired dial functions in |
| | sequence. |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| DL | Re-dial last number |
|--------------+---------------------------------------------|
| DP | Pulse dialing enabled |
|--------------+---------------------------------------------|
| DS=n | Dial stored telephone number n |
|--------------+---------------------------------------------|
| DT | Tone dialing enabled/Pulse dialing disabled |
|--------------+---------------------------------------------|
| DW | Dialing resumed following dial tone |
| | detection |
|--------------+---------------------------------------------|
| D, | Dialing paused for amount of time specified |
| | in S8 register |
|--------------+---------------------------------------------|
| D! | Flash function initiated. Modem commanded |
| | to go off-hook for specified time before |
| | returning on-hook. |
|--------------+---------------------------------------------|
| D@ | Wait for Quite Answer function enabled. |
| | Modem waits until a "quiet answer," a |
| | ring-back signal followed by silence up to |
| | the time specified in S7, is received prior |
| | to executing the rest of the dial string. |
|--------------+---------------------------------------------|
| D; | Modem returned to idle state after dialing. |
| | The semicolon can only be placed at the end |
| | of the dial command. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| REPORT INFORMATION |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] In [cmds] |
|--------------+---------------------------------------------|
| Description: | Displays information requested |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| I0 | Reports product code |
|--------------+---------------------------------------------|
| I1 | Reports 000 |
|--------------+---------------------------------------------|
| I2 | Reports OK or ERROR |
|--------------+---------------------------------------------|
| I3 | Reports firmware revision number |
|--------------+---------------------------------------------|
| I4 | Reports configuration settings |
+------------------------------------------------------------+
+------------------------------------------------------------+
| RESULT CODES |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] Qn [cmds] |
|--------------+---------------------------------------------|
| Description: | Enables modem to send result codes to the |
| | DTE |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| í Q0 | Result code sending enabled |
|--------------+---------------------------------------------|
| Q1 | Result code sending disabled |
|--------------+---------------------------------------------|
| Q2 | Call progress messages on originate only |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SPEAKER VOLUME |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] Ln [cmds] |
|--------------+---------------------------------------------|
| Description: | Controls speaker volume |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| L0 | Low volume setting |
|--------------+---------------------------------------------|
| L1 | Low volume setting |
|--------------+---------------------------------------------|
| í L2 | Medium volume setting |
|--------------+---------------------------------------------|
| L3 | Highest volume setting |
+------------------------------------------------------------+
+------------------------------------------------------------+
| TRELLIS CODING |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] &Un [cmds] |
|--------------+---------------------------------------------|
| Description: | Controls the trellis coding |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| &U0 | Enable trellis coding for V.32 mode at |
| | 9600bps |
|--------------+---------------------------------------------|
| í &U1 | Disable trellis coding for V.32 mode at |
| | 9600bps |
+------------------------------------------------------------+
Extended AT Commands
+------------------------------------------------------------+
| ANSWER MODE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %On [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets the answer mode |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| %O0 | Answer mode if ringing |
|--------------+---------------------------------------------|
| %O1 | Forced to answer mode |
|--------------+---------------------------------------------|
| %O2 | Automatic answer in originate mode |
+------------------------------------------------------------+
+------------------------------------------------------------+
| AUTO-RELIABLE TIME BUFFER CONFIGURATION |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Cn [cmds] |
|--------------+---------------------------------------------|
| Description: | Controls the handling of incoming data |
| | during auto-reliable time period |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| \C0 | Timeout and fallback, speed buffer, no data |
| | buffer |
|--------------+---------------------------------------------|
| \C1 | Timeout and fallback, speed buffer, buffer |
| | receive data |
|--------------+---------------------------------------------|
| \C2 | Auto reliable, fallback with fallback |
| | character, speed buffer, no receive data |
| | buffer |
|--------------+---------------------------------------------|
| \C3 | Timeout and fallback, ITU-T V.14, buffer |
| | receive data |
|--------------+---------------------------------------------|
| \C4 | Timeout and fallback with fallback |
| | character, ITU-T V.14, no data buffer |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BREAK SEND |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Bn [cmds] |
|--------------+---------------------------------------------|
| Description: | Sends break to modem |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| \B0 | 6 data bits, no parity, 1 stop bit |
|--------------+---------------------------------------------|
| \B1 | 7N1 character length |
|--------------+---------------------------------------------|
| \B2 | 7P1 character length |
|--------------+---------------------------------------------|
| \B3 | 8P1 character length |
|--------------+---------------------------------------------|
| \B4 | 7P2 character length |
|--------------+---------------------------------------------|
| \B5 | 8P1 character length |
+------------------------------------------------------------+
+------------------------------------------------------------+
| CALLER ID |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] #CC=n [cmds] |
|--------------+---------------------------------------------|
| Description: | Controls the Caller ID function |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| #CC=0 | Caller ID disabled |
|--------------+---------------------------------------------|
| #CC=1 | Caller ID displays formatted data |
|--------------+---------------------------------------------|
| #CC=2 | Caller ID displays raw hexadecimal data |
+------------------------------------------------------------+
+------------------------------------------------------------+
| CHARACTER ABORT |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %Kn [cmds] |
|--------------+---------------------------------------------|
| Description: | Controls the character abort |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| %K0 | Enable 2 second delay to character abort |
|--------------+---------------------------------------------|
| %K1 | Disable delay to character abort |
+------------------------------------------------------------+
+------------------------------------------------------------+
| COMPUTER - TO - MODEM SPEED SELECTION |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Tn [cmds] |
|--------------+---------------------------------------------|
| Description: | Controls the computer- to - modem speed |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| \T0 | Autobaud |
|--------------+---------------------------------------------|
| \T1 | Set speed to last AT command entry speed |
|--------------+---------------------------------------------|
| \T2 | Force 300bps after connecting |
|--------------+---------------------------------------------|
| \T3 | Force 1200bps after connecting |
|--------------+---------------------------------------------|
| \T4 | Force 2400bps after connecting |
|--------------+---------------------------------------------|
| \T5 | Force 4800bps after connecting |
|--------------+---------------------------------------------|
| \T6 | Force 7200bps after connecting |
|--------------+---------------------------------------------|
| \T7 | Force 9600bps after connecting |
|--------------+---------------------------------------------|
| \T8 | Force 12.0bps after connecting |
|--------------+---------------------------------------------|
| \T9 | Force 14.4bps after connecting |
|--------------+---------------------------------------------|
| \T10 | Force 16.8bps after connecting |
|--------------+---------------------------------------------|
| \T11 | Force 19.2bps after connecting |
|--------------+---------------------------------------------|
| \T12 | Force 21.6bps after connecting |
|--------------+---------------------------------------------|
| \T13 | Force 24.0bps after connecting |
|--------------+---------------------------------------------|
| \T14 | Force 26.4bps after connecting |
|--------------+---------------------------------------------|
| \T15 | Force 28.8bps after connecting |
|--------------+---------------------------------------------|
| \T16 | Force 38.4bps after connecting |
|--------------+---------------------------------------------|
| \T17 | Force 57.6bps after connecting |
|--------------+---------------------------------------------|
| \T18 | Force 76.8bps after connecting |
|--------------+---------------------------------------------|
| \T19 | Force 115.2bps after connecting |
|--------------+---------------------------------------------|
| \T20 | Force 128.0bps after connecting |
+------------------------------------------------------------+
+------------------------------------------------------------+
| CONNECT MODE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Nn [cmds] |
|--------------+---------------------------------------------|
| Description: | Controls the type of connection the modem |
| | will operate in |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| \N0 | Normal mode enabled |
|--------------+---------------------------------------------|
| \N1 | Direct mode enabled |
|--------------+---------------------------------------------|
| \N2 | Reliable mode enabled |
|--------------+---------------------------------------------|
| \N3 | Auto-reliable mode enabled |
|--------------+---------------------------------------------|
| \N4 | V.42 reliable mode enabled |
|--------------+---------------------------------------------|
| \N5 | V.42, MNP reliable mode enabled |
|--------------+---------------------------------------------|
| \N6 | Simulated controlled carrier |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DTR SIGNAL |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %Zn [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets the DTR signal |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| %Z0 | Ignore DTR toggle |
|--------------+---------------------------------------------|
| %Z1 | Dial stored phone number (0-3) on DTR |
| | toggle |
|--------------+---------------------------------------------|
| %Z2 | Attempt to connect on DTR toggle |
+------------------------------------------------------------+
+------------------------------------------------------------+
| EXTENDED RESULT CODES |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Vn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects extended result codes |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| \V0 | Connect and protocol message reports modem |
| | - to - modem speed |
|--------------+---------------------------------------------|
| \V1 | Connect and protocol message reports |
| | computer - to - modem speed |
|--------------+---------------------------------------------|
| \V2 | Connect message reports computer - to - |
| | modem speed/V.42 error correction |
|--------------+---------------------------------------------|
| \V3 | Connect message reports computer - to - |
| | modem speed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| FLOW CONTROL |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Gn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects modem port flow control |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| \G0 | Flow control disabled |
|--------------+---------------------------------------------|
| \G1 | XON/XOFF flow control enabled |
|--------------+---------------------------------------------|
| \G2 | XON/XOFF flow control only for transmitting |
| | data |
|--------------+---------------------------------------------|
| \G3 | XON/XOFF flow control with pass-through |
| | enabled |
+------------------------------------------------------------+
+------------------------------------------------------------+
| PARITY |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \P [cmds] |
|--------------+---------------------------------------------|
| Description: | Controls parity |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| \P0 | Even Parity |
|--------------+---------------------------------------------|
| \P1 | Space |
|--------------+---------------------------------------------|
| \P2 | Odd |
|--------------+---------------------------------------------|
| \P3 | Mark |
|--------------+---------------------------------------------|
| \P4 | Automatic |
+------------------------------------------------------------+
+------------------------------------------------------------+
| RETRAIN |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %Q [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets the retrain |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| %Q0 | Disable retrain |
|--------------+---------------------------------------------|
| %Q1 | Attempt up to 3 retrains and disconnect if |
| | unsuccessful |
|--------------+---------------------------------------------|
| %Q2 | Retrain until signal quality is good |
+------------------------------------------------------------+
+------------------------------------------------------------+
| RETURN CALL PROGRESS MESSAGE SPEED |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %R [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets the return call progress message speed |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| %R0 | Return call progress message at current |
| | computer - to - modem speed |
|--------------+---------------------------------------------|
| %R1 | Return call progress message at last |
| | computer- to - modem speed |
|--------------+---------------------------------------------|
| %R2 | Return call progress message at 300bps |
|--------------+---------------------------------------------|
| %R3 | Return call progress message at 1200bps |
|--------------+---------------------------------------------|
| %R4 | Return call progress message at 2400bps |
|--------------+---------------------------------------------|
| %R5 | Return call progress message at 4800bps |
|--------------+---------------------------------------------|
| %R6 | Return call progress message at 7200bps |
|--------------+---------------------------------------------|
| %R7 | Return call progress message at 9600bps |
|--------------+---------------------------------------------|
| %R8 | Return call progress message at 12.0bps |
|--------------+---------------------------------------------|
| %R9 | Return call progress message at 14.4bps |
|--------------+---------------------------------------------|
| %R10 | Return call progress message at 16.8bps |
|--------------+---------------------------------------------|
| %R11 | Return call progress message at 19.2bps |
|--------------+---------------------------------------------|
| %R12 | Return call progress message at 21.6bps |
|--------------+---------------------------------------------|
| %R13 | Return call progress message at 24.0bps |
|--------------+---------------------------------------------|
| %R14 | Return call progress message at 26.4bps |
|--------------+---------------------------------------------|
| %R15 | Return call progress message at 28.8bps |
|--------------+---------------------------------------------|
| %R16 | Return call progress message at 38.4bps |
|--------------+---------------------------------------------|
| %R17 | Return call progress message at 57.6bps |
|--------------+---------------------------------------------|
| %R18 | Return call progress message at 76.8bps |
|--------------+---------------------------------------------|
| %R19 | Return call progress message at 115.2bps |
|--------------+---------------------------------------------|
| %R20 | Return call progress message at 128.0bps |
+------------------------------------------------------------+
S(status) -REGISTERS
+------------------------------------------------------------+
| RETRANSMISSION COUNTER |
|------------------------------------------------------------|
| Type: | Register |
|--------------+---------------------------------------------|
| Format | AT [cmds] S70=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 100 |
|--------------+---------------------------------------------|
| Range: | 0-255 |
|--------------+---------------------------------------------|
| Description: | Sets the retransmission counter |
+------------------------------------------------------------+