MOTOROLA ======== VOICESURFR 28800 INTERNAL Card Type Modem (asynchronous) Chip Set Unidentified I/O Options Speaker out, microphone Maximum Modem Rate 28.8Kbps Maximum Fax Rate 14.4Kbps Data Modulation Protocol Unidentified Fax Modulation Protocol Unidentified Error Correction/Compression Unidentified Fax Class Unidentified Data Bus 16-bit ISA Card Size Half-length, full-height card +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |------------------------------------------------------------| | Line out (RJ-11) | CN1 | Speaker out | CN3 | |-----------------------------+---------+-------------+------| | Line in (RJ-11) | CN2 | Microphone | CN4 | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Label | Position | |-------------------------------------+-------+--------------| | i Factory configured - do not alter | S6 | Unidentified | |-------------------------------------+-------+--------------| | i Factory configured - do not alter | S7 | Unidentified | |-------------------------------------+-------+--------------| | i Factory configured - do not alter | S8 | Unidentified | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT ADDRESS | |------------------------------------------------------------| | Setting | S1 | S2 | |--------------------+-------------------+-------------------| | COM1 (3F8h) | Open | Open | |--------------------+-------------------+-------------------| | COM2 (2F8h) | Closed | Open | |--------------------+-------------------+-------------------| | i COM3 (3E8h) | Open | Closed | |--------------------+-------------------+-------------------| | COM4 (2E8h) | Closed | Closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | INTERRUPT | |------------------------------------------------------------| | Setting | S3 | S4 | S5 | |---------------+--------------+--------------+--------------| | IRQ 3 | Closed | Open | Open | |---------------+--------------+--------------+--------------| | IRQ 4 | Open | Closed | Open | |---------------+--------------+--------------+--------------| | i IRQ 5 | Open | Open | Closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | PLUG AND PLAY | |------------------------------------------------------------| | Plug & Play | JP10 | JP11 | JP12 | JP13 | JP14 | |-------------+---------+---------+--------+--------+--------| | Enabled | Closed | Closed | Closed | Open | Closed | |-------------+---------+---------+--------+--------+--------| | i Disabled | Open | Open | Open | Closed | Open | +------------------------------------------------------------+ +------------------------------------------------------------+ | SUPPORTED COMMAND SET | |------------------------------------------------------------| | Basic AT Commands | |------------------------------------------------------------| | AT, '+++', A/ | |------------------------------------------------------------| | A, E, H, M, O, S, V, X, Y, Z | |------------------------------------------------------------| | &F, &V, &W, &Y, &Z | |------------------------------------------------------------| | Extended AT Commands | |------------------------------------------------------------| | \K, \Q | |------------------------------------------------------------| | %A, %C | |------------------------------------------------------------| | S Registers | |------------------------------------------------------------| | S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, | | S25, S26, S38 | |------------------------------------------------------------| | Note: See MHI Help File for full command documentation. | +------------------------------------------------------------+ Proprietary AT Command Set +------------------------------------------------------------+ | AUTO FALLFORWARD/FALLBACK | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] &An [cmds] | |--------------+---------------------------------------------| | Description: | Controls the auto fallforward/fallback | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | i &A0 | Disable auto fallforward/fallback | |--------------+---------------------------------------------| | &A1 | Enable auto fallforward/fallback | +------------------------------------------------------------+ +------------------------------------------------------------+ | CONNECTION SPEED NEGOTIATION | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] &Hn [cmds] | |--------------+---------------------------------------------| | Description: | Controls the connection speed negotiation | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | i &H0 | V.34 connect speed negotiation | | | (28.8Kbps-300bps) | |--------------+---------------------------------------------| | &H1 | V.34 (28.8Kbps- 4800bps) | |--------------+---------------------------------------------| | &H2 | V.32bis automatic (14.4Kbps -300bps) | |--------------+---------------------------------------------| | &H3 | V.32bis only (14.4Kbps - 4800bps) | |--------------+---------------------------------------------| | &H4 | V.32 automatic (9600-300bps) | |--------------+---------------------------------------------| | &H5 | V.32 only (9600-4800bps) | |--------------+---------------------------------------------| | &H6 | V.22 only (2400-1200bps) | |--------------+---------------------------------------------| | &H7 | V.22 only (1200bps) | |--------------+---------------------------------------------| | &H8 | 212 only (1200bps) | |--------------+---------------------------------------------| | &H9 | 103 only (300bps) | |--------------+---------------------------------------------| | &H10 | V.21 only (300bps) | +------------------------------------------------------------+ +------------------------------------------------------------+ | DATA CARRIER DETECT (DCD) | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] &Cn [cmds] | |--------------+---------------------------------------------| | Description: | Selects whether the DCD option is enabled | | | or disabled | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | i &C0 | DCD enabled | |--------------+---------------------------------------------| | &C1 | DCD enabled after carrier signal detected | |--------------+---------------------------------------------| | &C2 | Force DCD on and toggle DCD on disconnect | +------------------------------------------------------------+ +------------------------------------------------------------+ | DATA SET READY (DSR) | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] &Sn [cmds] | |--------------+---------------------------------------------| | Description: | Selects DSR options | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | &S0 | DSR forced high | |--------------+---------------------------------------------| | i &S1 | DSR high only while modem is handshaking or | | | connected | |--------------+---------------------------------------------| | &S2 | DSR high only while modem is connected | |--------------+---------------------------------------------| | &S3 | DSR is forced high in all modes | +------------------------------------------------------------+ +------------------------------------------------------------+ | DATA TERMINAL READY (DTR) | |------------------------------------------------------------| | Type: | Configuration | |---------------+--------------------------------------------| | Format: | AT [cmds] &Dn [cmds] | |---------------+--------------------------------------------| | Description: | Selects modem response to DTR | |------------------------------------------------------------| | Note: The action each variant of &D causes depends on | | the setting of &Q | |------------------------------------------------------------| | Command | Function | |---------------+--------------------------------------------| | i &D0 | Modem does not respond to DTR | |---------------+--------------------------------------------| | &D1 | Modem goes to command mode after DTR goes | | | is off | |---------------+--------------------------------------------| | &D2 | Modem goes to command mode and disconnects | | | (hangs up) after DTR goes off; Auto-Answer | | | is disabled. | |---------------+--------------------------------------------| | &D3 | Modem is initialized after DTR goes off | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAL | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] D<#> [cmds] | |--------------+---------------------------------------------| | Description: | Dials telephone number according to any | | | modifiers included in the string | |--------------+---------------------------------------------| | Note: | Any combination of modifiers can be used to | | | produce the desired dial functions in | | | sequence. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | DL | Re-dial last number | |--------------+---------------------------------------------| | DP | Pulse dialing enabled | |--------------+---------------------------------------------| | DS=n | Dial stored telephone number n | |--------------+---------------------------------------------| | DT | Tone dialing enabled/Pulse dialing disabled | |--------------+---------------------------------------------| | DW | Dialing resumed following dial tone | | | detection | |--------------+---------------------------------------------| | D, | Dialing paused for amount of time specified | | | in S8 register | |--------------+---------------------------------------------| | D! | Flash function initiated. Modem commanded | | | to go off-hook for specified time before | | | returning on-hook. | |--------------+---------------------------------------------| | D@ | Wait for Quite Answer function enabled. | | | Modem waits until a "quiet answer," a | | | ring-back signal followed by silence up to | | | the time specified in S7, is received prior | | | to executing the rest of the dial string. | |--------------+---------------------------------------------| | D; | Modem returned to idle state after dialing. | | | The semicolon can only be placed at the end | | | of the dial command. | +------------------------------------------------------------+ +------------------------------------------------------------+ | REPORT INFORMATION | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] In [cmds] | |--------------+---------------------------------------------| | Description: | Displays information requested | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | I0 | Reports product code | |--------------+---------------------------------------------| | I1 | Reports 000 | |--------------+---------------------------------------------| | I2 | Reports OK or ERROR | |--------------+---------------------------------------------| | I3 | Reports firmware revision number | |--------------+---------------------------------------------| | I4 | Reports configuration settings | +------------------------------------------------------------+ +------------------------------------------------------------+ | RESULT CODES | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] Qn [cmds] | |--------------+---------------------------------------------| | Description: | Enables modem to send result codes to the | | | DTE | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | i Q0 | Result code sending enabled | |--------------+---------------------------------------------| | Q1 | Result code sending disabled | |--------------+---------------------------------------------| | Q2 | Call progress messages on originate only | +------------------------------------------------------------+ +------------------------------------------------------------+ | SPEAKER VOLUME | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] Ln [cmds] | |--------------+---------------------------------------------| | Description: | Controls speaker volume | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | L0 | Low volume setting | |--------------+---------------------------------------------| | L1 | Low volume setting | |--------------+---------------------------------------------| | i L2 | Medium volume setting | |--------------+---------------------------------------------| | L3 | Highest volume setting | +------------------------------------------------------------+ +------------------------------------------------------------+ | TRELLIS CODING | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] &Un [cmds] | |--------------+---------------------------------------------| | Description: | Controls the trellis coding | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | &U0 | Enable trellis coding for V.32 mode at | | | 9600bps | |--------------+---------------------------------------------| | i &U1 | Disable trellis coding for V.32 mode at | | | 9600bps | +------------------------------------------------------------+ Extended AT Commands +------------------------------------------------------------+ | ANSWER MODE | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] %On [cmds] | |--------------+---------------------------------------------| | Description: | Sets the answer mode | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | %O0 | Answer mode if ringing | |--------------+---------------------------------------------| | %O1 | Forced to answer mode | |--------------+---------------------------------------------| | %O2 | Automatic answer in originate mode | +------------------------------------------------------------+ +------------------------------------------------------------+ | AUTO-RELIABLE TIME BUFFER CONFIGURATION | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Cn [cmds] | |--------------+---------------------------------------------| | Description: | Controls the handling of incoming data | | | during auto-reliable time period | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | \C0 | Timeout and fallback, speed buffer, no data | | | buffer | |--------------+---------------------------------------------| | \C1 | Timeout and fallback, speed buffer, buffer | | | receive data | |--------------+---------------------------------------------| | \C2 | Auto reliable, fallback with fallback | | | character, speed buffer, no receive data | | | buffer | |--------------+---------------------------------------------| | \C3 | Timeout and fallback, ITU-T V.14, buffer | | | receive data | |--------------+---------------------------------------------| | \C4 | Timeout and fallback with fallback | | | character, ITU-T V.14, no data buffer | +------------------------------------------------------------+ +------------------------------------------------------------+ | BREAK SEND | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Bn [cmds] | |--------------+---------------------------------------------| | Description: | Sends break to modem | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | \B0 | 6 data bits, no parity, 1 stop bit | |--------------+---------------------------------------------| | \B1 | 7N1 character length | |--------------+---------------------------------------------| | \B2 | 7P1 character length | |--------------+---------------------------------------------| | \B3 | 8P1 character length | |--------------+---------------------------------------------| | \B4 | 7P2 character length | |--------------+---------------------------------------------| | \B5 | 8P1 character length | +------------------------------------------------------------+ +------------------------------------------------------------+ | CALLER ID | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] #CC=n [cmds] | |--------------+---------------------------------------------| | Description: | Controls the Caller ID function | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | #CC=0 | Caller ID disabled | |--------------+---------------------------------------------| | #CC=1 | Caller ID displays formatted data | |--------------+---------------------------------------------| | #CC=2 | Caller ID displays raw hexadecimal data | +------------------------------------------------------------+ +------------------------------------------------------------+ | CHARACTER ABORT | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] %Kn [cmds] | |--------------+---------------------------------------------| | Description: | Controls the character abort | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | %K0 | Enable 2 second delay to character abort | |--------------+---------------------------------------------| | %K1 | Disable delay to character abort | +------------------------------------------------------------+ +------------------------------------------------------------+ | COMPUTER - TO - MODEM SPEED SELECTION | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Tn [cmds] | |--------------+---------------------------------------------| | Description: | Controls the computer- to - modem speed | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | \T0 | Autobaud | |--------------+---------------------------------------------| | \T1 | Set speed to last AT command entry speed | |--------------+---------------------------------------------| | \T2 | Force 300bps after connecting | |--------------+---------------------------------------------| | \T3 | Force 1200bps after connecting | |--------------+---------------------------------------------| | \T4 | Force 2400bps after connecting | |--------------+---------------------------------------------| | \T5 | Force 4800bps after connecting | |--------------+---------------------------------------------| | \T6 | Force 7200bps after connecting | |--------------+---------------------------------------------| | \T7 | Force 9600bps after connecting | |--------------+---------------------------------------------| | \T8 | Force 12.0bps after connecting | |--------------+---------------------------------------------| | \T9 | Force 14.4bps after connecting | |--------------+---------------------------------------------| | \T10 | Force 16.8bps after connecting | |--------------+---------------------------------------------| | \T11 | Force 19.2bps after connecting | |--------------+---------------------------------------------| | \T12 | Force 21.6bps after connecting | |--------------+---------------------------------------------| | \T13 | Force 24.0bps after connecting | |--------------+---------------------------------------------| | \T14 | Force 26.4bps after connecting | |--------------+---------------------------------------------| | \T15 | Force 28.8bps after connecting | |--------------+---------------------------------------------| | \T16 | Force 38.4bps after connecting | |--------------+---------------------------------------------| | \T17 | Force 57.6bps after connecting | |--------------+---------------------------------------------| | \T18 | Force 76.8bps after connecting | |--------------+---------------------------------------------| | \T19 | Force 115.2bps after connecting | |--------------+---------------------------------------------| | \T20 | Force 128.0bps after connecting | +------------------------------------------------------------+ +------------------------------------------------------------+ | CONNECT MODE | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Nn [cmds] | |--------------+---------------------------------------------| | Description: | Controls the type of connection the modem | | | will operate in | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | \N0 | Normal mode enabled | |--------------+---------------------------------------------| | \N1 | Direct mode enabled | |--------------+---------------------------------------------| | \N2 | Reliable mode enabled | |--------------+---------------------------------------------| | \N3 | Auto-reliable mode enabled | |--------------+---------------------------------------------| | \N4 | V.42 reliable mode enabled | |--------------+---------------------------------------------| | \N5 | V.42, MNP reliable mode enabled | |--------------+---------------------------------------------| | \N6 | Simulated controlled carrier | +------------------------------------------------------------+ +------------------------------------------------------------+ | DTR SIGNAL | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] %Zn [cmds] | |--------------+---------------------------------------------| | Description: | Sets the DTR signal | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | %Z0 | Ignore DTR toggle | |--------------+---------------------------------------------| | %Z1 | Dial stored phone number (0-3) on DTR | | | toggle | |--------------+---------------------------------------------| | %Z2 | Attempt to connect on DTR toggle | +------------------------------------------------------------+ +------------------------------------------------------------+ | EXTENDED RESULT CODES | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Vn [cmds] | |--------------+---------------------------------------------| | Description: | Selects extended result codes | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | \V0 | Connect and protocol message reports modem | | | - to - modem speed | |--------------+---------------------------------------------| | \V1 | Connect and protocol message reports | | | computer - to - modem speed | |--------------+---------------------------------------------| | \V2 | Connect message reports computer - to - | | | modem speed/V.42 error correction | |--------------+---------------------------------------------| | \V3 | Connect message reports computer - to - | | | modem speed | +------------------------------------------------------------+ +------------------------------------------------------------+ | FLOW CONTROL | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Gn [cmds] | |--------------+---------------------------------------------| | Description: | Selects modem port flow control | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | \G0 | Flow control disabled | |--------------+---------------------------------------------| | \G1 | XON/XOFF flow control enabled | |--------------+---------------------------------------------| | \G2 | XON/XOFF flow control only for transmitting | | | data | |--------------+---------------------------------------------| | \G3 | XON/XOFF flow control with pass-through | | | enabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | PARITY | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] \P [cmds] | |--------------+---------------------------------------------| | Description: | Controls parity | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | \P0 | Even Parity | |--------------+---------------------------------------------| | \P1 | Space | |--------------+---------------------------------------------| | \P2 | Odd | |--------------+---------------------------------------------| | \P3 | Mark | |--------------+---------------------------------------------| | \P4 | Automatic | +------------------------------------------------------------+ +------------------------------------------------------------+ | RETRAIN | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] %Q [cmds] | |--------------+---------------------------------------------| | Description: | Sets the retrain | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | %Q0 | Disable retrain | |--------------+---------------------------------------------| | %Q1 | Attempt up to 3 retrains and disconnect if | | | unsuccessful | |--------------+---------------------------------------------| | %Q2 | Retrain until signal quality is good | +------------------------------------------------------------+ +------------------------------------------------------------+ | RETURN CALL PROGRESS MESSAGE SPEED | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] %R [cmds] | |--------------+---------------------------------------------| | Description: | Sets the return call progress message speed | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | %R0 | Return call progress message at current | | | computer - to - modem speed | |--------------+---------------------------------------------| | %R1 | Return call progress message at last | | | computer- to - modem speed | |--------------+---------------------------------------------| | %R2 | Return call progress message at 300bps | |--------------+---------------------------------------------| | %R3 | Return call progress message at 1200bps | |--------------+---------------------------------------------| | %R4 | Return call progress message at 2400bps | |--------------+---------------------------------------------| | %R5 | Return call progress message at 4800bps | |--------------+---------------------------------------------| | %R6 | Return call progress message at 7200bps | |--------------+---------------------------------------------| | %R7 | Return call progress message at 9600bps | |--------------+---------------------------------------------| | %R8 | Return call progress message at 12.0bps | |--------------+---------------------------------------------| | %R9 | Return call progress message at 14.4bps | |--------------+---------------------------------------------| | %R10 | Return call progress message at 16.8bps | |--------------+---------------------------------------------| | %R11 | Return call progress message at 19.2bps | |--------------+---------------------------------------------| | %R12 | Return call progress message at 21.6bps | |--------------+---------------------------------------------| | %R13 | Return call progress message at 24.0bps | |--------------+---------------------------------------------| | %R14 | Return call progress message at 26.4bps | |--------------+---------------------------------------------| | %R15 | Return call progress message at 28.8bps | |--------------+---------------------------------------------| | %R16 | Return call progress message at 38.4bps | |--------------+---------------------------------------------| | %R17 | Return call progress message at 57.6bps | |--------------+---------------------------------------------| | %R18 | Return call progress message at 76.8bps | |--------------+---------------------------------------------| | %R19 | Return call progress message at 115.2bps | |--------------+---------------------------------------------| | %R20 | Return call progress message at 128.0bps | +------------------------------------------------------------+ S(status) -REGISTERS +------------------------------------------------------------+ | RETRANSMISSION COUNTER | |------------------------------------------------------------| | Type: | Register | |--------------+---------------------------------------------| | Format | AT [cmds] S70=n [cmds] | |--------------+---------------------------------------------| | Default: | 100 | |--------------+---------------------------------------------| | Range: | 0-255 | |--------------+---------------------------------------------| | Description: | Sets the retransmission counter | +------------------------------------------------------------+