(TXT) View Source
       
       # BEST DATA PRODUCTS, INC.
       
          SMART ONE 2834F, SMART ONE 2834V, SMART ONE 2834VP
       
          Card Type              Modem (asynchronous)                    
          Chipset                Unidentified                            
          I/O Options            Voice (except on Smart One 2834F)       
          Maximum Data Rate      28.8Kbps                                
          Maximum Fax Rate       14.4Kbps                                
          Data Bus               8-bit ISA                               
          Fax Class              Class I & II                            
          Data Modulation        Bell 103A/212A                          
                                                                         
                                 ITU-T V.21, V.22, V.22bis, V.23, V.32,  
                                 V.32bis, V.34                           
                                                                         
                                 Rockwell V.FC                           
          Fax Modulation         ITU-T V.17, V.21CH2, V.27ter, V.29      
          Error                  MNP5, MNP10EC, V.42, V.42bis            
          Correction/Compression 
       
 (IMG) IMG 1
          
       
          +------------------------------------------------------------+
          |                        CONNECTIONS                         |
          |------------------------------------------------------------|
          |       Function       | Label |      Function       | Label |
          |----------------------+-------+---------------------+-------|
          | Line out             |  CN1  | Line in             |  CN2  |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                    INTERRUPT SELECTION                     |
          |------------------------------------------------------------|
          |  Setting   |   SW1/1   |   SW1/2   |   SW1/3   |   SW1/4   |
          |------------+-----------+-----------+-----------+-----------|
          |   í IRQ3   |    On     |    Off    |    Off    |    Off    |
          |------------+-----------+-----------+-----------+-----------|
          |    IRQ4    |    Off    |    On     |    Off    |    Off    |
          |------------+-----------+-----------+-----------+-----------|
          |    IRQ5    |    Off    |    Off    |    On     |    Off    |
          |------------+-----------+-----------+-----------+-----------|
          |    IRQ7    |    Off    |    Off    |    Off    |    On     |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |               SERIAL PORT ADDRESS SELECTION                |
          |------------------------------------------------------------|
          |      Setting       |       SW1/5       |       SW1/6       |
          |--------------------+-------------------+-------------------|
          |    3F8h (COM1:)    |        On         |        On         |
          |--------------------+-------------------+-------------------|
          |   í 2F8h (COM2:)   |        On         |        Off        |
          |--------------------+-------------------+-------------------|
          |    3E8h (COM3:)    |        Off        |        On         |
          |--------------------+-------------------+-------------------|
          |    2E8h (COM4:)    |        Off        |        Off        |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                SUPPORTED STANDARD COMMANDS                 |
          |------------------------------------------------------------|
          |                     Basic AT Commands                      |
          |------------------------------------------------------------|
          | +++, ‘comma’, A/                                           |
          |------------------------------------------------------------|
          | A, B, D, E, H, L, M, N, O, P, Q, T, V, W, X, Y, Z          |
          |------------------------------------------------------------|
          | &C, &D, &F, &G, &K, &P, &Q, &R, &S, &T, &V, &W, &X, &Y, &Z |
          |------------------------------------------------------------|
          |                    Extended AT Commands                    |
          |------------------------------------------------------------|
          | \A, \B, \G, \K, \N                                         |
          |------------------------------------------------------------|
          | %C, %E, %L, %Q                                             |
          |------------------------------------------------------------|
          |                    Special AT Commands                     |
          |------------------------------------------------------------|
          | #CID, +MS                                                  |
          |------------------------------------------------------------|
          |                        S-Registers                         |
          |------------------------------------------------------------|
          | S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12,     |
          | S14, S16, S18, S21, S22, S23, S24, S25, S26                |
          |------------------------------------------------------------|
          | S28, S29, S30, S31, S32, S33, S36, S38, S39, S40, S41,     |
          | S46, S48, S82, S86, S91, S92, S95                          |
          |------------------------------------------------------------|
          |      Note: See MHI documentation for complete information. |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                   UNIDENTIFIED COMMANDS                    |
          |------------------------------------------------------------|
          |          Command           |            Default            |
          |----------------------------+-------------------------------|
          |            S37             |               0               |
          |----------------------------+-------------------------------|
          |            S201            |         Unidentified          |
          +------------------------------------------------------------+
       
                            Proprietary AT Command Set
       
          +------------------------------------------------------------+
          |                    DISPLAY INFORMATION                     |
          |------------------------------------------------------------|
          | Type:        | Immediate                                   |
          |--------------+---------------------------------------------|
          | Format:      | AT [cmds] In [cmds]                         |
          |--------------+---------------------------------------------|
          | Description: | Displays information requested about the    |
          |              | modem.                                      |
          |--------------+---------------------------------------------|
          |   Command    |                  Function                   |
          |--------------+---------------------------------------------|
          |      I0      | Displays product identification code.       |
          |--------------+---------------------------------------------|
          |      I1      | Displays ROM checksum.                      |
          |--------------+---------------------------------------------|
          |      I3      | Displays firmware model, revision, and      |
          |              | interface.                                  |
          |--------------+---------------------------------------------|
          |      I5      | Displays country code.                      |
          |--------------+---------------------------------------------|
          |      I6      | Displays data pump model and revision.      |
          |--------------+---------------------------------------------|
          |      I7      | Displays the DAA code.                      |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                MNP10 POWER LEVEL ADJUSTMENT                |
          |------------------------------------------------------------|
          | Type:        | Configuration                               |
          |--------------+---------------------------------------------|
          | Format:      | AT [cmds] )Mn [cmds]                        |
          |--------------+---------------------------------------------|
          | Description: | Controls automatic transmit power level     |
          |              | adjustment during MNP 10 link negotiation.  |
          |--------------+---------------------------------------------|
          |   Command    |                  Function                   |
          |--------------+---------------------------------------------|
          |     )M0      | Power level adjustment disabled.            |
          |--------------+---------------------------------------------|
          |     )M1      | Power level adjustment enabled.             |
          |--------------+---------------------------------------------|
          |     )M2      | Power level adjustment enabled; S40 bit 2   |
          |              | and S201 bit 6 are reset to their default   |
          |              | settings.                                   |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                        MNP10EC MODE                        |
          |------------------------------------------------------------|
          | Type:        | Configuration                               |
          |--------------+---------------------------------------------|
          | Format:      | AT [cmds] -SEC=n [cmds]                     |
          |--------------+---------------------------------------------|
          | Description: | Selects whether the modem will attempt to   |
          |              | use MNP10EC mode during the handshaking     |
          |              | sequence.                                   |
          |------------------------------------------------------------|
          |     Command     |                 Function                 |
          |-----------------+------------------------------------------|
          |     -SEC=0      | MNP10EC handshaking disabled unless a    |
          |                 | V.34 connection is attempted via a       |
          |                 | cellular line.                           |
          |-----------------+------------------------------------------|
          |    í -SEC=1     | MNP10EC handshaking enabled.             |
          +------------------------------------------------------------+