BEST DATA PRODUCTS, INC. ======================== SMART ONE 2834F, SMART ONE 2834V, SMART ONE 2834VP Card Type Modem (asynchronous) Chipset Unidentified I/O Options Voice (except on Smart One 2834F) Maximum Data Rate 28.8Kbps Maximum Fax Rate 14.4Kbps Data Bus 8-bit ISA Fax Class Class I & II Data Modulation Bell 103A/212A ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34 Rockwell V.FC Fax Modulation ITU-T V.17, V.21CH2, V.27ter, V.29 Error MNP5, MNP10EC, V.42, V.42bis Correction/Compression +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |----------------------+-------+---------------------+-------| | Line out | CN1 | Line in | CN2 | +------------------------------------------------------------+ +------------------------------------------------------------+ | INTERRUPT SELECTION | |------------------------------------------------------------| | Setting | SW1/1 | SW1/2 | SW1/3 | SW1/4 | |------------+-----------+-----------+-----------+-----------| | i IRQ3 | On | Off | Off | Off | |------------+-----------+-----------+-----------+-----------| | IRQ4 | Off | On | Off | Off | |------------+-----------+-----------+-----------+-----------| | IRQ5 | Off | Off | On | Off | |------------+-----------+-----------+-----------+-----------| | IRQ7 | Off | Off | Off | On | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT ADDRESS SELECTION | |------------------------------------------------------------| | Setting | SW1/5 | SW1/6 | |--------------------+-------------------+-------------------| | 3F8h (COM1:) | On | On | |--------------------+-------------------+-------------------| | i 2F8h (COM2:) | On | Off | |--------------------+-------------------+-------------------| | 3E8h (COM3:) | Off | On | |--------------------+-------------------+-------------------| | 2E8h (COM4:) | Off | Off | +------------------------------------------------------------+ +------------------------------------------------------------+ | SUPPORTED STANDARD COMMANDS | |------------------------------------------------------------| | Basic AT Commands | |------------------------------------------------------------| | +++, 'comma', A/ | |------------------------------------------------------------| | A, B, D, E, H, L, M, N, O, P, Q, T, V, W, X, Y, Z | |------------------------------------------------------------| | &C, &D, &F, &G, &K, &P, &Q, &R, &S, &T, &V, &W, &X, &Y, &Z | |------------------------------------------------------------| | Extended AT Commands | |------------------------------------------------------------| | \A, \B, \G, \K, \N | |------------------------------------------------------------| | %C, %E, %L, %Q | |------------------------------------------------------------| | Special AT Commands | |------------------------------------------------------------| | #CID, +MS | |------------------------------------------------------------| | S-Registers | |------------------------------------------------------------| | S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, | | S14, S16, S18, S21, S22, S23, S24, S25, S26 | |------------------------------------------------------------| | S28, S29, S30, S31, S32, S33, S36, S38, S39, S40, S41, | | S46, S48, S82, S86, S91, S92, S95 | |------------------------------------------------------------| | Note: See MHI documentation for complete information. | +------------------------------------------------------------+ +------------------------------------------------------------+ | UNIDENTIFIED COMMANDS | |------------------------------------------------------------| | Command | Default | |----------------------------+-------------------------------| | S37 | 0 | |----------------------------+-------------------------------| | S201 | Unidentified | +------------------------------------------------------------+ Proprietary AT Command Set +------------------------------------------------------------+ | DISPLAY INFORMATION | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] In [cmds] | |--------------+---------------------------------------------| | Description: | Displays information requested about the | | | modem. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | I0 | Displays product identification code. | |--------------+---------------------------------------------| | I1 | Displays ROM checksum. | |--------------+---------------------------------------------| | I3 | Displays firmware model, revision, and | | | interface. | |--------------+---------------------------------------------| | I5 | Displays country code. | |--------------+---------------------------------------------| | I6 | Displays data pump model and revision. | |--------------+---------------------------------------------| | I7 | Displays the DAA code. | +------------------------------------------------------------+ +------------------------------------------------------------+ | MNP10 POWER LEVEL ADJUSTMENT | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] )Mn [cmds] | |--------------+---------------------------------------------| | Description: | Controls automatic transmit power level | | | adjustment during MNP 10 link negotiation. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | )M0 | Power level adjustment disabled. | |--------------+---------------------------------------------| | )M1 | Power level adjustment enabled. | |--------------+---------------------------------------------| | )M2 | Power level adjustment enabled; S40 bit 2 | | | and S201 bit 6 are reset to their default | | | settings. | +------------------------------------------------------------+ +------------------------------------------------------------+ | MNP10EC MODE | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] -SEC=n [cmds] | |--------------+---------------------------------------------| | Description: | Selects whether the modem will attempt to | | | use MNP10EC mode during the handshaking | | | sequence. | |------------------------------------------------------------| | Command | Function | |-----------------+------------------------------------------| | -SEC=0 | MNP10EC handshaking disabled unless a | | | V.34 connection is attempted via a | | | cellular line. | |-----------------+------------------------------------------| | i -SEC=1 | MNP10EC handshaking enabled. | +------------------------------------------------------------+