(TXT) View Source
       
       # DIGITAL EQUIPMENT CORPORATION
       
          FIBER-OPTIC SAS CONTROLLER (DEFPA-AA),
       
          FIBER-OPTIC SAS ADAPTER (DEFPA-AB)
       
          Card Type              Network Interface Card                  
          NIC Type               FDDI                                    
          Maximum Onboard Memory Unidentified                            
          Boot ROM               Unidentified                            
          Network Transfer Rate  100Mbps                                 
          Topology               Ring                                    
          Wiring Type            Fiber optic cable                       
          Data Bus               32-bit PCI                              
       
 (IMG) IMG 1
          
       
          +------------------------------------------------------------+
          |                        CONNECTIONS                         |
          |------------------------------------------------------------|
          |             Function              |         Label          |
          |-----------------------------------+------------------------|
          | Fiber-optic connector - duplex SC |          CN1           |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                     DIAGNOSTIC LED(S)                      |
          |------------------------------------------------------------|
          | LED  | Color  |  Status  |            Condition            |
          |------+--------+----------+---------------------------------|
          | LED1 | Green  |    On    |   Network connection is good    |
          |------+--------+----------+---------------------------------|
          | LED1 | Green  | Blinking | Network connection in progress  |
          |------+--------+----------+---------------------------------|
          | LED1 | Green  |   Off    |  Network connection is broken   |
          |------+--------+----------+---------------------------------|
          | LED1 |  Red   |    On    |            See Note             |
          |------+--------+----------+---------------------------------|
          | LED1 |  Red   | Blinking |        Illegal topology         |
          |------+--------+----------+---------------------------------|
          | LED1 |  Red   |   Off    |  Network connection is broken   |
          |------------------------------------------------------------|
          | Note: If LED1 is red and on after system boots, indicates  |
          | broken port or Link Confidence Test (LCT) failure; retry   |
          | loop. If LED1 is red and on before system boots, indicates |
          | self-test failure.                                         |
          +------------------------------------------------------------+