DIGITAL EQUIPMENT CORPORATION
=============================

   FIBER-OPTIC SAS CONTROLLER (DEFPA-AA),

   FIBER-OPTIC SAS ADAPTER (DEFPA-AB)

   Card Type              Network Interface Card                  
   NIC Type               FDDI                                    
   Maximum Onboard Memory Unidentified                            
   Boot ROM               Unidentified                            
   Network Transfer Rate  100Mbps                                 
   Topology               Ring                                    
   Wiring Type            Fiber optic cable                       
   Data Bus               32-bit PCI                              

<gopher://bitreich.org/I/th99/n/C-D/42000-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |             Function              |         Label          |
   |-----------------------------------+------------------------|
   | Fiber-optic connector - duplex SC |          CN1           |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                     DIAGNOSTIC LED(S)                      |
   |------------------------------------------------------------|
   | LED  | Color  |  Status  |            Condition            |
   |------+--------+----------+---------------------------------|
   | LED1 | Green  |    On    |   Network connection is good    |
   |------+--------+----------+---------------------------------|
   | LED1 | Green  | Blinking | Network connection in progress  |
   |------+--------+----------+---------------------------------|
   | LED1 | Green  |   Off    |  Network connection is broken   |
   |------+--------+----------+---------------------------------|
   | LED1 |  Red   |    On    |            See Note             |
   |------+--------+----------+---------------------------------|
   | LED1 |  Red   | Blinking |        Illegal topology         |
   |------+--------+----------+---------------------------------|
   | LED1 |  Red   |   Off    |  Network connection is broken   |
   |------------------------------------------------------------|
   | Note: If LED1 is red and on after system boots, indicates  |
   | broken port or Link Confidence Test (LCT) failure; retry   |
   | loop. If LED1 is red and on before system boots, indicates |
   | self-test failure.                                         |
   +------------------------------------------------------------+