(TXT) View Source
       
       # DANPEX CORPORATION
       
          EN-2000PB/EN-2000PT/EN-2000P3
       
          NIC Type:      Ethernet                                        
          Transfer Rate: 10Mbps                                          
          Data Bus:      16-bit ISA                                      
          Topology:      Linear bus                                      
                                                                         
                         Star                                            
          Wiring Type    AUI transceiver via DB-15 port (EN-2000P3,      
                         EN-2000P)                                       
                                                                         
                         RG-58A/U 50ohm coaxial (EN-2000P3, EN-2000P)    
                                                                         
                         Shielded/Unshielded twisted pair (EN-2000P3,    
                         EN2000PT)                                       
          Boot ROM       Available                                       
       
 (IMG) IMG 1
          
       
          +------------------------------------------------------------+
          |                        CONNECTIONS                         |
          |------------------------------------------------------------|
          |            Purpose            |          Location          |
          |-------------------------------+----------------------------|
          |    External LED connector     |            SW2             |
          +------------------------------------------------------------+
       
 (IMG) IMG 2
          
       
          +------------------------------------------------------------+
          |                      DIAGNOSTIC LEDS                       |
          |------------------------------------------------------------|
          | LED  | Status |                 Condition                  |
          |------+--------+--------------------------------------------|
          | LED1 |   On   | Network connection is good (UTP connection |
          |      |        |                   only)                    |
          |------+--------+--------------------------------------------|
          | LED1 |  Off   |        Network connection is broken        |
          |------+--------+--------------------------------------------|
          | LED2 |   On   |   Data is being received or transmitted    |
          |------+--------+--------------------------------------------|
          | LED2 |  Off   | Data is not being received or transmitted  |
          |------------------------------------------------------------|
          | LED1 exists on models EN-2000PT and EN-2000P3 only.        |
          +------------------------------------------------------------+