DANPEX CORPORATION
==================

   EN-2000PB/EN-2000PT/EN-2000P3

   NIC Type:      Ethernet                                        
   Transfer Rate: 10Mbps                                          
   Data Bus:      16-bit ISA                                      
   Topology:      Linear bus                                      
                                                                  
                  Star                                            
   Wiring Type    AUI transceiver via DB-15 port (EN-2000P3,      
                  EN-2000P)                                       
                                                                  
                  RG-58A/U 50ohm coaxial (EN-2000P3, EN-2000P)    
                                                                  
                  Shielded/Unshielded twisted pair (EN-2000P3,    
                  EN2000PT)                                       
   Boot ROM       Available                                       

<gopher://bitreich.org/I/th99/n/C-D/40910-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |            Purpose            |          Location          |
   |-------------------------------+----------------------------|
   |    External LED connector     |            SW2             |
   +------------------------------------------------------------+

<gopher://bitreich.org/I/th99/n/C-D/40910-2.png>
   

   +------------------------------------------------------------+
   |                      DIAGNOSTIC LEDS                       |
   |------------------------------------------------------------|
   | LED  | Status |                 Condition                  |
   |------+--------+--------------------------------------------|
   | LED1 |   On   | Network connection is good (UTP connection |
   |      |        |                   only)                    |
   |------+--------+--------------------------------------------|
   | LED1 |  Off   |        Network connection is broken        |
   |------+--------+--------------------------------------------|
   | LED2 |   On   |   Data is being received or transmitted    |
   |------+--------+--------------------------------------------|
   | LED2 |  Off   | Data is not being received or transmitted  |
   |------------------------------------------------------------|
   | LED1 exists on models EN-2000PT and EN-2000P3 only.        |
   +------------------------------------------------------------+