(TXT) View Source
       
       # DANPEX CORPORATION
       
          EN-2200BT
       
          NIC Type         Ethernet                                      
          Transfer Rate    10Mbps                                        
          Data Bus         16-bit ISA                                    
          Topology         Star                                          
                                                                         
                           Linear bus                                    
          Wiring Type      RG58A/U 50ohm coaxial                         
                                                                         
                           Shielded/Unshielded twisted pair              
                                                                         
                           AUI transceiver via DB-15 port                
          Boot ROM         Available                                     
       
 (IMG) IMG 1
          
       
          +------------------------------------------------------------+
          |                        ACTIVITY LED                        |
          |------------------------------------------------------------|
          |            Setting            |            JP1             |
          |-------------------------------+----------------------------|
          |            Enabled            |           Closed           |
          |-------------------------------+----------------------------|
          |           Disabled            |            Open            |
          |------------------------------------------------------------|
          | Note:If the network hub has an activity LED for each line, |
          | setting this option to "enabled" will allow the hub LED to |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                    LINK INTEGRITY TEST                     |
          |------------------------------------------------------------|
          |            Setting            |            JP2             |
          |-------------------------------+----------------------------|
          | »         |      Enabled      |     Pins 1 & 2 closed      |
          |-----------+-------------------+----------------------------|
          |           |     Disabled      |     Pins 2 & 3 closed      |
          |------------------------------------------------------------|
          | Note:The link integrity test is valid only when the cable  |
          | type is shielded/unshielded twisted pair.                  |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                         CABLE TYPE                         |
          |------------------------------------------------------------|
          |            Type             |     JP3      |  JP6A - JP6F  |
          |-----------------------------+--------------+---------------|
          |     | RG58A/U 50ohm coaxial |  Pins 2 & 3  |  Pins 1 & 2   |
          |     |                       |    closed    |    closed     |
          |-----+-----------------------+--------------+---------------|
          | »   |  Shielded/Unshielded  |  Pins 1 & 2  |      N/A      |
          |     |     twisted pair      |    closed    |               |
          |-----+-----------------------+--------------+---------------|
          |     |  AUI transceiver via  |  Pins 2 & 3  |  Pins 2 & 3   |
          |     |      DB-15 port       |    closed    |    closed     |
          |------------------------------------------------------------|
          | Note:When the cable type is twisted pair, the settings for |
          | JP6A - JP6F are not used.                                  |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                         WAIT STATE                         |
          |------------------------------------------------------------|
          |        Setting         |       JP4       |       JP5       |
          |------------------------+-----------------+-----------------|
          | » |   0 wait states    |      Open       |      Open       |
          |---+--------------------+-----------------+-----------------|
          |   |    1 wait state    |      Open       |     Closed      |
          |---+--------------------+-----------------+-----------------|
          |   |   2 wait states    |     Closed      |      Open       |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                     ONBOARD TERMINATOR                     |
          |------------------------------------------------------------|
          |            Setting            |            JP7             |
          |-------------------------------+----------------------------|
          | »         |     Disabled      |     Pins 1 & 2 closed      |
          |-----------+-------------------+----------------------------|
          |           |      Enabled      |      Pin 2 & 3 closed      |
          |------------------------------------------------------------|
          | Note:If the card is on either side of a coaxial segment,   |
          | the onboard terminator can be enabled instead of using an  |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                          BOOT ROM                          |
          |------------------------------------------------------------|
          |             Setting             |           JP9A           |
          |---------------------------------+--------------------------|
          | » |          Disabled           |           Open           |
          |---+-----------------------------+--------------------------|
          |   |           Enabled           |          Closed          |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                      BOOT ROM ADDRESS                      |
          |------------------------------------------------------------|
          | Boot ROM Address |    JP9B     |    JP9C     |    JP9D     |
          |------------------+-------------+-------------+-------------|
          |      C8000h      |   Closed    |    Open     |   Closed    |
          |------------------+-------------+-------------+-------------|
          |      CC000h      |    Open     |    Open     |   Closed    |
          |------------------+-------------+-------------+-------------|
          |      D0000h      |   Closed    |   Closed    |    Open     |
          |------------------+-------------+-------------+-------------|
          |      D4000h      |    Open     |   Closed    |    Open     |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                      I/O BASE ADDRESS                      |
          |------------------------------------------------------------|
          |      I/O Address      |       JP9E       |      JP9F       |
          |-----------------------+------------------+-----------------|
          | »   |      300h       |      Closed      |     Closed      |
          |-----+-----------------+------------------+-----------------|
          |     |      320h       |       Open       |     Closed      |
          |-----+-----------------+------------------+-----------------|
          |     |      340h       |      Closed      |      Open       |
          |-----+-----------------+------------------+-----------------|
          |     |      360h       |       Open       |      Open       |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                     INTERRUPT REQUEST                      |
          |------------------------------------------------------------|
          | IRQ  | JP10A | JP10B | JP10C | JP10D | JP10E |JP10F |JP10G |
          |------+-------+-------+-------+-------+-------+------+------|
          | |2/9 |Closed | Open  | Open  | Open  | Open  | Open | Open |
          |-+----+-------+-------+-------+-------+-------+------+------|
          |»| 3  | Open  |Closed | Open  | Open  | Open  | Open | Open |
          |-+----+-------+-------+-------+-------+-------+------+------|
          | | 4  | Open  | Open  |Closed | Open  | Open  | Open | Open |
          |-+----+-------+-------+-------+-------+-------+------+------|
          | | 5  | Open  | Open  | Open  |Closed | Open  | Open | Open |
          |-+----+-------+-------+-------+-------+-------+------+------|
          | | 10 | Open  | Open  | Open  | Open  |Closed | Open | Open |
          |-+----+-------+-------+-------+-------+-------+------+------|
          | | 12 | Open  | Open  | Open  | Open  | Open  |Closed| Open |
          |-+----+-------+-------+-------+-------+-------+------+------|
          | | 15 | Open  | Open  | Open  | Open  | Open  | Open |Closed|
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                     DIAGNOSTIC LED(S)                      |
          |------------------------------------------------------------|
          |    LED     |     Status     |          Condition           |
          |------------+----------------+------------------------------|
          |    LED1    |    Blinking    |  Data is being transmitted   |
          |------------+----------------+------------------------------|
          |    LED1    |      Off       |      Data is not being       |
          |            |                |         transmitted          |
          |------------+----------------+------------------------------|
          |    LED2    |       On       |  Twisted pair connection is  |
          |            |                |             good             |
          |------------+----------------+------------------------------|
          |    LED2    |      Off       |  Twisted pair connection is  |
          |            |                |            broken            |
          |------------+----------------+------------------------------|
          |    LED3    |    Blinking    |    Data is being received    |
          |------------+----------------+------------------------------|
          |    LED3    |      Off       |  Data is not being received  |
          |------------+----------------+------------------------------|
          |    LED4    |       On       |    Collision detected on     |
          |            |                |           network            |
          |------------+----------------+------------------------------|
          |    LED4    |      Off       |  No collisions detected on   |
          |            |                |           network            |
          |------------------------------------------------------------|
          | Note:LED2 will only funtion when the cable type is twisted |
          | pair, otherwise LED2 will remain off.                      |
          +------------------------------------------------------------+