DANPEX CORPORATION
==================

   EN-2200BT

   NIC Type         Ethernet                                      
   Transfer Rate    10Mbps                                        
   Data Bus         16-bit ISA                                    
   Topology         Star                                          
                                                                  
                    Linear bus                                    
   Wiring Type      RG58A/U 50ohm coaxial                         
                                                                  
                    Shielded/Unshielded twisted pair              
                                                                  
                    AUI transceiver via DB-15 port                
   Boot ROM         Available                                     

<gopher://bitreich.org/I/th99/n/C-D/40376-1.png>
   

   +------------------------------------------------------------+
   |                        ACTIVITY LED                        |
   |------------------------------------------------------------|
   |            Setting            |            JP1             |
   |-------------------------------+----------------------------|
   |            Enabled            |           Closed           |
   |-------------------------------+----------------------------|
   |           Disabled            |            Open            |
   |------------------------------------------------------------|
   | Note:If the network hub has an activity LED for each line, |
   | setting this option to "enabled" will allow the hub LED to |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                    LINK INTEGRITY TEST                     |
   |------------------------------------------------------------|
   |            Setting            |            JP2             |
   |-------------------------------+----------------------------|
   |>>         |      Enabled      |     Pins 1 & 2 closed      |
   |-----------+-------------------+----------------------------|
   |           |     Disabled      |     Pins 2 & 3 closed      |
   |------------------------------------------------------------|
   | Note:The link integrity test is valid only when the cable  |
   | type is shielded/unshielded twisted pair.                  |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                         CABLE TYPE                         |
   |------------------------------------------------------------|
   |            Type             |     JP3      |  JP6A - JP6F  |
   |-----------------------------+--------------+---------------|
   |     | RG58A/U 50ohm coaxial |  Pins 2 & 3  |  Pins 1 & 2   |
   |     |                       |    closed    |    closed     |
   |-----+-----------------------+--------------+---------------|
   |>>   |  Shielded/Unshielded  |  Pins 1 & 2  |      N/A      |
   |     |     twisted pair      |    closed    |               |
   |-----+-----------------------+--------------+---------------|
   |     |  AUI transceiver via  |  Pins 2 & 3  |  Pins 2 & 3   |
   |     |      DB-15 port       |    closed    |    closed     |
   |------------------------------------------------------------|
   | Note:When the cable type is twisted pair, the settings for |
   | JP6A - JP6F are not used.                                  |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                         WAIT STATE                         |
   |------------------------------------------------------------|
   |        Setting         |       JP4       |       JP5       |
   |------------------------+-----------------+-----------------|
   |>> |   0 wait states    |      Open       |      Open       |
   |---+--------------------+-----------------+-----------------|
   |   |    1 wait state    |      Open       |     Closed      |
   |---+--------------------+-----------------+-----------------|
   |   |   2 wait states    |     Closed      |      Open       |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                     ONBOARD TERMINATOR                     |
   |------------------------------------------------------------|
   |            Setting            |            JP7             |
   |-------------------------------+----------------------------|
   |>>         |     Disabled      |     Pins 1 & 2 closed      |
   |-----------+-------------------+----------------------------|
   |           |      Enabled      |      Pin 2 & 3 closed      |
   |------------------------------------------------------------|
   | Note:If the card is on either side of a coaxial segment,   |
   | the onboard terminator can be enabled instead of using an  |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                          BOOT ROM                          |
   |------------------------------------------------------------|
   |             Setting             |           JP9A           |
   |---------------------------------+--------------------------|
   |>> |          Disabled           |           Open           |
   |---+-----------------------------+--------------------------|
   |   |           Enabled           |          Closed          |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                      BOOT ROM ADDRESS                      |
   |------------------------------------------------------------|
   | Boot ROM Address |    JP9B     |    JP9C     |    JP9D     |
   |------------------+-------------+-------------+-------------|
   |      C8000h      |   Closed    |    Open     |   Closed    |
   |------------------+-------------+-------------+-------------|
   |      CC000h      |    Open     |    Open     |   Closed    |
   |------------------+-------------+-------------+-------------|
   |      D0000h      |   Closed    |   Closed    |    Open     |
   |------------------+-------------+-------------+-------------|
   |      D4000h      |    Open     |   Closed    |    Open     |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                      I/O BASE ADDRESS                      |
   |------------------------------------------------------------|
   |      I/O Address      |       JP9E       |      JP9F       |
   |-----------------------+------------------+-----------------|
   |>>   |      300h       |      Closed      |     Closed      |
   |-----+-----------------+------------------+-----------------|
   |     |      320h       |       Open       |     Closed      |
   |-----+-----------------+------------------+-----------------|
   |     |      340h       |      Closed      |      Open       |
   |-----+-----------------+------------------+-----------------|
   |     |      360h       |       Open       |      Open       |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                     INTERRUPT REQUEST                      |
   |------------------------------------------------------------|
   | IRQ  | JP10A | JP10B | JP10C | JP10D | JP10E |JP10F |JP10G |
   |------+-------+-------+-------+-------+-------+------+------|
   | |2/9 |Closed | Open  | Open  | Open  | Open  | Open | Open |
   |-+----+-------+-------+-------+-------+-------+------+------|
   |>>| 3  | Open  |Closed | Open  | Open  | Open  | Open | Open |
   |-+----+-------+-------+-------+-------+-------+------+------|
   | | 4  | Open  | Open  |Closed | Open  | Open  | Open | Open |
   |-+----+-------+-------+-------+-------+-------+------+------|
   | | 5  | Open  | Open  | Open  |Closed | Open  | Open | Open |
   |-+----+-------+-------+-------+-------+-------+------+------|
   | | 10 | Open  | Open  | Open  | Open  |Closed | Open | Open |
   |-+----+-------+-------+-------+-------+-------+------+------|
   | | 12 | Open  | Open  | Open  | Open  | Open  |Closed| Open |
   |-+----+-------+-------+-------+-------+-------+------+------|
   | | 15 | Open  | Open  | Open  | Open  | Open  | Open |Closed|
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                     DIAGNOSTIC LED(S)                      |
   |------------------------------------------------------------|
   |    LED     |     Status     |          Condition           |
   |------------+----------------+------------------------------|
   |    LED1    |    Blinking    |  Data is being transmitted   |
   |------------+----------------+------------------------------|
   |    LED1    |      Off       |      Data is not being       |
   |            |                |         transmitted          |
   |------------+----------------+------------------------------|
   |    LED2    |       On       |  Twisted pair connection is  |
   |            |                |             good             |
   |------------+----------------+------------------------------|
   |    LED2    |      Off       |  Twisted pair connection is  |
   |            |                |            broken            |
   |------------+----------------+------------------------------|
   |    LED3    |    Blinking    |    Data is being received    |
   |------------+----------------+------------------------------|
   |    LED3    |      Off       |  Data is not being received  |
   |------------+----------------+------------------------------|
   |    LED4    |       On       |    Collision detected on     |
   |            |                |           network            |
   |------------+----------------+------------------------------|
   |    LED4    |      Off       |  No collisions detected on   |
   |            |                |           network            |
   |------------------------------------------------------------|
   | Note:LED2 will only funtion when the cable type is twisted |
   | pair, otherwise LED2 will remain off.                      |
   +------------------------------------------------------------+