(TXT) View Source
# COMPUTER MODULES, INC.
BBU-IR1, BBU-IR5
Card Type Battery pack
I/O Options DC power out
Data Bus N/A (see technical note)
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Label | Function | Label |
|----------------------+-------+---------------------+-------|
| 9V DC power out to | P4 | Battery test switch | SW1 |
| Turbodisc | | | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BATTERIES |
|------------------------------------------------------------|
| Power | Bank 0 | Bank 1 | Bank 2 | Bank 3 | Bank 4 |
|----------+---------+---------+---------+---------+---------|
| 500mAh | (6) | NONE | NONE | NONE | NONE |
| | 1.5V AA | | | | |
|----------+---------+---------+---------+---------+---------|
| 1000mAh | (6) | (6) | NONE | NONE | NONE |
| | 1.5V AA | 1.5V AA | | | |
|----------+---------+---------+---------+---------+---------|
| 1500mAh | (6) | (6) | (6) | NONE | NONE |
| | 1.5V AA | 1.5V AA | 1.5V AA | | |
|----------+---------+---------+---------+---------+---------|
| 2000mAh | (6) | (6) | (6) | (6) | NONE |
| | 1.5V AA | 1.5V AA | 1.5V AA | 1.5V AA | |
|----------+---------+---------+---------+---------+---------|
| 2500mAh | (6) | (6) | (6) | (6) | (6) |
| | 1.5V AA | 1.5V AA | 1.5V AA | 1.5V AA | 1.5V AA |
|------------------------------------------------------------|
| Note: Ni-cad batteries must be used. If other types |
| of batteries are used the hardware or batteries could |
| be damaged. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DIAGNOSTIC LED(S) |
|------------------------------------------------------------|
| LED | Color | Status | Condition |
|------+-------+--------+------------------------------------|
| LED1 | Green | On | Board has sufficient charge to |
| | | | power Turbodisc |
|------+-------+--------+------------------------------------|
| LED1 | Green | Off | Board does not have sufficient |
| | | | charge to power Turbodisc |
|------+-------+--------+------------------------------------|
| LED2 | Green | On | Batteries are receiving power from |
| | | | Turbodisc AC adapter for charging |
|------+-------+--------+------------------------------------|
| LED2 | Green | Off | Batteries are not receiving power |
| | | | from Turbodisc AC adapter for |
| | | | charging |
|------------------------------------------------------------|
| Note: These LEDs will only function when the battery |
| test switch is pushed. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| MISCELLANEOUS TECHNICAL NOTES |
|------------------------------------------------------------|
| This card has no connectors on its card edge. It can |
| therefore be installed in any 16-bit format card slot. It |
| provides battery backup power for the Computer Modules, |
| Inc. Turbodisc, document number V2116. |
+------------------------------------------------------------+