COMPUTER MODULES, INC. ====================== BBU-IR1, BBU-IR5 Card Type Battery pack I/O Options DC power out Data Bus N/A (see technical note) +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |----------------------+-------+---------------------+-------| | 9V DC power out to | P4 | Battery test switch | SW1 | | Turbodisc | | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | BATTERIES | |------------------------------------------------------------| | Power | Bank 0 | Bank 1 | Bank 2 | Bank 3 | Bank 4 | |----------+---------+---------+---------+---------+---------| | 500mAh | (6) | NONE | NONE | NONE | NONE | | | 1.5V AA | | | | | |----------+---------+---------+---------+---------+---------| | 1000mAh | (6) | (6) | NONE | NONE | NONE | | | 1.5V AA | 1.5V AA | | | | |----------+---------+---------+---------+---------+---------| | 1500mAh | (6) | (6) | (6) | NONE | NONE | | | 1.5V AA | 1.5V AA | 1.5V AA | | | |----------+---------+---------+---------+---------+---------| | 2000mAh | (6) | (6) | (6) | (6) | NONE | | | 1.5V AA | 1.5V AA | 1.5V AA | 1.5V AA | | |----------+---------+---------+---------+---------+---------| | 2500mAh | (6) | (6) | (6) | (6) | (6) | | | 1.5V AA | 1.5V AA | 1.5V AA | 1.5V AA | 1.5V AA | |------------------------------------------------------------| | Note: Ni-cad batteries must be used. If other types | | of batteries are used the hardware or batteries could | | be damaged. | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAGNOSTIC LED(S) | |------------------------------------------------------------| | LED | Color | Status | Condition | |------+-------+--------+------------------------------------| | LED1 | Green | On | Board has sufficient charge to | | | | | power Turbodisc | |------+-------+--------+------------------------------------| | LED1 | Green | Off | Board does not have sufficient | | | | | charge to power Turbodisc | |------+-------+--------+------------------------------------| | LED2 | Green | On | Batteries are receiving power from | | | | | Turbodisc AC adapter for charging | |------+-------+--------+------------------------------------| | LED2 | Green | Off | Batteries are not receiving power | | | | | from Turbodisc AC adapter for | | | | | charging | |------------------------------------------------------------| | Note: These LEDs will only function when the battery | | test switch is pushed. | +------------------------------------------------------------+ +------------------------------------------------------------+ | MISCELLANEOUS TECHNICAL NOTES | |------------------------------------------------------------| | This card has no connectors on its card edge. It can | | therefore be installed in any 16-bit format card slot. It | | provides battery backup power for the Computer Modules, | | Inc. Turbodisc, document number V2116. | +------------------------------------------------------------+