(TXT) View Source
# MYLEX CORPORATION
DCE376
+------------------------------------------------------------+
+------------------------------------------------------------+
Data bus: 32 bit, EISA
Size: Full-length, full-height card
Hard drives supported: Up to seven SCSI devices
Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB
Maximum heads/cyl.: 16 heads and 2048 cylinders
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Location |
|----------------------------------------------+-------------|
| 34-pin data cable connector-floppy drive | P0 |
|----------------------------------------------+-------------|
| 50-pin SCSI connector-internal | P3 |
|----------------------------------------------+-------------|
| 4-pin connector-drive active LED | P5 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS (FOR REV 1D) |
|------------------------------------------------------------|
| Function | Location | Setting |
|-----------------------------------+-----------+------------|
| » | Factory configured - do not | J1 & J2 | pins 2 & 3 |
| | alter | | closed |
|---+-------------------------------+-----------+------------|
| » | Supports 64K PROM | J5 | pins 2 & 3 |
| | | | closed |
|---+-------------------------------+-----------+------------|
| | Supports 128K PROM | J5 | pins 1 & 2 |
| | | | closed |
|---+-------------------------------+-----------+------------|
| » | Hard Drive Interrupt IRQ14 | J10 | pins 1 & 2 |
| | enabled | | closed |
|---+-------------------------------+-----------+------------|
| | Hard Drive Interrupt IRQ14 | J10 | open |
| | disabled | | |
|---+-------------------------------+-----------+------------|
| » | Factory configured - do not | J11 | pins 2 & 3 |
| | alter | | closed |
|---+-------------------------------+-----------+------------|
| » | Factory configured - do not | J12 & J13 | pins 1 & 2 |
| | alter | | closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS (FOR REV 1E) |
|------------------------------------------------------------|
| Function | Location | Setting |
|------------------------------------+----------+------------|
| » | Supports 64K PROM | J1 | pins 2 & 3 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | Supports 128K PROM | J1 | pins 1 & 2 |
| | | | closed |
|---+--------------------------------+----------+------------|
| » | Factory configured - do not | J2 | pins 2 & 3 |
| | alter | | closed |
|---+--------------------------------+----------+------------|
| » | Factory configured - do not | J9 | pins 2 & 3 |
| | alter | | closed |
|---+--------------------------------+----------+------------|
| » | Hard Drive Interrupt IRQ14 | J10 | pins 1 & 2 |
| | enabled | | closed |
|---+--------------------------------+----------+------------|
| | Hard Drive Interrupt IRQ14 | J10 | open |
| | disabled | | |
|---+--------------------------------+----------+------------|
| » | Floppy drive enabled | J11 | pins 2 & 3 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | Floppy drive disabled | J11 | pins 1 & 2 |
| | | | closed |
| | (Revisions prior to "1E" | | |
| | require special PROM's) | | |
|---+--------------------------------+----------+------------|
| » | Factory configured - do not | J12 | pins 1 & 2 |
| | alter | | closed |
|---+--------------------------------+----------+------------|
| » | DCE376 emulates primary | J13 | pins 1 & 2 |
| | controller position | | closed |
|---+--------------------------------+----------+------------|
| | DCE376 emulates secondary | J13 | pins 2 & 3 |
| | controller position | | closed |
|---+--------------------------------+----------+------------|
| | Factory setting for 3Px | J14 | pins 1 & 2 |
| | firmware | | closed |
|---+--------------------------------+----------+------------|
| | Factory setting for 2Px | J14 | pins 2 & 3 |
| | firmware | | closed |
|---+--------------------------------+----------+------------|
| » | Factory configured - do not | J16 | open |
| | alter | | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| CACHE CONFIGURATION (FOR REV 1D) |
|------------------------------------------------------------|
| Size | J3 | J4 | J6 | J7 | J8 | J9 |
|--------+--------+--------+--------+--------+-------+-------|
| 256KB | pins 1 | pins 1 | open | pins 1 | pins | pins |
| | & 2 | & 2 | | & 2 | 1 & 2 | 1 & 2 |
|--------+--------+--------+--------+--------+-------+-------|
| 1024KB | pins 2 | pins 2 | open | pins 1 | pins | pins |
| | & 3 | & 3 | | & 2 | 2 & 3 | 1 & 2 |
|--------+--------+--------+--------+--------+-------+-------|
| 4096KB | pins 2 | open | pins 2 | pins 2 | pins | pins |
| | & 3 | | & 3 | & 3 | 2 & 3 | 2 & 3 |
|------------------------------------------------------------|
| Note:Pins designated should be in the closed position. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| CACHE CONFIGURATION (FOR REV 1E) |
|------------------------------------------------------------|
| Size | J3 | J4 | J5 | J6 | J7 | J8 |
|--------+--------+--------+--------+--------+-------+-------|
| 256KB | pins 1 | pins 1 | pins 1 | open | pins | pins |
| | & 2 | & 2 | & 2 | | 1 & 2 | 1 & 2 |
|--------+--------+--------+--------+--------+-------+-------|
| 1024KB | pins 2 | pins 2 | pins 1 | open | pins | pins |
| | & 3 | & 3 | & 2 | | 2 & 3 | 1 & 2 |
|--------+--------+--------+--------+--------+-------+-------|
| 4096KB | pins 2 | open | 2-3 | pins 2 | pins | pins |
| | & 3 | | closed | & 3 | 2 & 3 | 2 & 3 |
|------------------------------------------------------------|
| Note:Pins designated should be in the closed position. |
+------------------------------------------------------------+