MYLEX CORPORATION ================= DCE376 +------------------------------------------------------------+ +------------------------------------------------------------+ Data bus: 32 bit, EISA Size: Full-length, full-height card Hard drives supported: Up to seven SCSI devices Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB Maximum heads/cyl.: 16 heads and 2048 cylinders +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Location | |----------------------------------------------+-------------| | 34-pin data cable connector-floppy drive | P0 | |----------------------------------------------+-------------| | 50-pin SCSI connector-internal | P3 | |----------------------------------------------+-------------| | 4-pin connector-drive active LED | P5 | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS (FOR REV 1D) | |------------------------------------------------------------| | Function | Location | Setting | |-----------------------------------+-----------+------------| |>> | Factory configured - do not | J1 & J2 | pins 2 & 3 | | | alter | | closed | |---+-------------------------------+-----------+------------| |>> | Supports 64K PROM | J5 | pins 2 & 3 | | | | | closed | |---+-------------------------------+-----------+------------| | | Supports 128K PROM | J5 | pins 1 & 2 | | | | | closed | |---+-------------------------------+-----------+------------| |>> | Hard Drive Interrupt IRQ14 | J10 | pins 1 & 2 | | | enabled | | closed | |---+-------------------------------+-----------+------------| | | Hard Drive Interrupt IRQ14 | J10 | open | | | disabled | | | |---+-------------------------------+-----------+------------| |>> | Factory configured - do not | J11 | pins 2 & 3 | | | alter | | closed | |---+-------------------------------+-----------+------------| |>> | Factory configured - do not | J12 & J13 | pins 1 & 2 | | | alter | | closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS (FOR REV 1E) | |------------------------------------------------------------| | Function | Location | Setting | |------------------------------------+----------+------------| |>> | Supports 64K PROM | J1 | pins 2 & 3 | | | | | closed | |---+--------------------------------+----------+------------| | | Supports 128K PROM | J1 | pins 1 & 2 | | | | | closed | |---+--------------------------------+----------+------------| |>> | Factory configured - do not | J2 | pins 2 & 3 | | | alter | | closed | |---+--------------------------------+----------+------------| |>> | Factory configured - do not | J9 | pins 2 & 3 | | | alter | | closed | |---+--------------------------------+----------+------------| |>> | Hard Drive Interrupt IRQ14 | J10 | pins 1 & 2 | | | enabled | | closed | |---+--------------------------------+----------+------------| | | Hard Drive Interrupt IRQ14 | J10 | open | | | disabled | | | |---+--------------------------------+----------+------------| |>> | Floppy drive enabled | J11 | pins 2 & 3 | | | | | closed | |---+--------------------------------+----------+------------| | | Floppy drive disabled | J11 | pins 1 & 2 | | | | | closed | | | (Revisions prior to "1E" | | | | | require special PROM's) | | | |---+--------------------------------+----------+------------| |>> | Factory configured - do not | J12 | pins 1 & 2 | | | alter | | closed | |---+--------------------------------+----------+------------| |>> | DCE376 emulates primary | J13 | pins 1 & 2 | | | controller position | | closed | |---+--------------------------------+----------+------------| | | DCE376 emulates secondary | J13 | pins 2 & 3 | | | controller position | | closed | |---+--------------------------------+----------+------------| | | Factory setting for 3Px | J14 | pins 1 & 2 | | | firmware | | closed | |---+--------------------------------+----------+------------| | | Factory setting for 2Px | J14 | pins 2 & 3 | | | firmware | | closed | |---+--------------------------------+----------+------------| |>> | Factory configured - do not | J16 | open | | | alter | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | CACHE CONFIGURATION (FOR REV 1D) | |------------------------------------------------------------| | Size | J3 | J4 | J6 | J7 | J8 | J9 | |--------+--------+--------+--------+--------+-------+-------| | 256KB | pins 1 | pins 1 | open | pins 1 | pins | pins | | | & 2 | & 2 | | & 2 | 1 & 2 | 1 & 2 | |--------+--------+--------+--------+--------+-------+-------| | 1024KB | pins 2 | pins 2 | open | pins 1 | pins | pins | | | & 3 | & 3 | | & 2 | 2 & 3 | 1 & 2 | |--------+--------+--------+--------+--------+-------+-------| | 4096KB | pins 2 | open | pins 2 | pins 2 | pins | pins | | | & 3 | | & 3 | & 3 | 2 & 3 | 2 & 3 | |------------------------------------------------------------| | Note:Pins designated should be in the closed position. | +------------------------------------------------------------+ +------------------------------------------------------------+ | CACHE CONFIGURATION (FOR REV 1E) | |------------------------------------------------------------| | Size | J3 | J4 | J5 | J6 | J7 | J8 | |--------+--------+--------+--------+--------+-------+-------| | 256KB | pins 1 | pins 1 | pins 1 | open | pins | pins | | | & 2 | & 2 | & 2 | | 1 & 2 | 1 & 2 | |--------+--------+--------+--------+--------+-------+-------| | 1024KB | pins 2 | pins 2 | pins 1 | open | pins | pins | | | & 3 | & 3 | & 2 | | 2 & 3 | 1 & 2 | |--------+--------+--------+--------+--------+-------+-------| | 4096KB | pins 2 | open | 2-3 | pins 2 | pins | pins | | | & 3 | | closed | & 3 | 2 & 3 | 2 & 3 | |------------------------------------------------------------| | Note:Pins designated should be in the closed position. | +------------------------------------------------------------+