(TXT) View Source
# EVEREX SYSTEMS, INC.
EV-365
Data Bus: 16-bit ISA
Size: Full-length, Full-height card
Hard drives IDE (AT) drives
supported:
Floppy drives Two 360KB, 720KB, 1.2MB, or 1.44MB drives
supported:
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Location |
|-----------------------------------------------+------------|
| 10-pin serial port (COM1/3) - internal | CN1 |
|-----------------------------------------------+------------|
| 25-pin parallel port (LPT2/3) external | CN2 |
|-----------------------------------------------+------------|
| 10-pin serial port (COM2/4) - internal | CN3 |
|-----------------------------------------------+------------|
| 34-pin control cable connector - floppy drive | CN4 |
|-----------------------------------------------+------------|
| 40-pin IDE (AT) Interface connector | CN5 |
|-----------------------------------------------+------------|
| 15-pin game port - internal | CN6 |
|-----------------------------------------------+------------|
| 2-pin connector - Drive active LED | JP1 |
|-----------------------------------------------+------------|
| Optional IOCHRDY for IDE interface | JP9 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Location | Setting |
|------------------------------------+----------+------------|
| » | Serial port 1 enabled | JP2 | Pins 1 & 2 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | Serial port 1 disabled | JP2 | Pins 2 & 3 |
| | | | closed |
|---+--------------------------------+----------+------------|
| » | Game port enabled | JP3 | Pins 1 & 2 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | Game port disabled | JP3 | Pins 2 & 3 |
| | | | closed |
|---+--------------------------------+----------+------------|
| » | Floppy drive enabled | JP4 | Pins 1 & 2 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | Floppy drive disabled | JP4 | Pins 2 & 3 |
| | | | closed |
|---+--------------------------------+----------+------------|
| » | Printer port is set to LPT2 | JP5 | Pins 1 & 2 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | Printer port is set to LPT3 | JP5 | Pins 2 & 3 |
| | | | closed |
|---+--------------------------------+----------+------------|
| » | IDE interface enabled | JP6 | Pins 1 & 2 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | IDE interface disabled | JP6 | Pins 2 & 3 |
| | | | closed |
|---+--------------------------------+----------+------------|
| » | Serial port 2 enabled | JP7 | Pins 1 & 2 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | Serial port 2 disabled | JP7 | Pins 2 & 3 |
| | | | closed |
|---+--------------------------------+----------+------------|
| » | Primary Hard Disk Controller | JP8 | Pins 1 & 2 |
| | enabled | | closed |
|---+--------------------------------+----------+------------|
| | Primary Hard Disk Controller | JP8 | Pins 2 & 3 |
| | disabled | | closed |
+------------------------------------------------------------+