EVEREX SYSTEMS, INC. ==================== EV-365 Data Bus: 16-bit ISA Size: Full-length, Full-height card Hard drives IDE (AT) drives supported: Floppy drives Two 360KB, 720KB, 1.2MB, or 1.44MB drives supported: +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Location | |-----------------------------------------------+------------| | 10-pin serial port (COM1/3) - internal | CN1 | |-----------------------------------------------+------------| | 25-pin parallel port (LPT2/3) external | CN2 | |-----------------------------------------------+------------| | 10-pin serial port (COM2/4) - internal | CN3 | |-----------------------------------------------+------------| | 34-pin control cable connector - floppy drive | CN4 | |-----------------------------------------------+------------| | 40-pin IDE (AT) Interface connector | CN5 | |-----------------------------------------------+------------| | 15-pin game port - internal | CN6 | |-----------------------------------------------+------------| | 2-pin connector - Drive active LED | JP1 | |-----------------------------------------------+------------| | Optional IOCHRDY for IDE interface | JP9 | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Location | Setting | |------------------------------------+----------+------------| |>> | Serial port 1 enabled | JP2 | Pins 1 & 2 | | | | | closed | |---+--------------------------------+----------+------------| | | Serial port 1 disabled | JP2 | Pins 2 & 3 | | | | | closed | |---+--------------------------------+----------+------------| |>> | Game port enabled | JP3 | Pins 1 & 2 | | | | | closed | |---+--------------------------------+----------+------------| | | Game port disabled | JP3 | Pins 2 & 3 | | | | | closed | |---+--------------------------------+----------+------------| |>> | Floppy drive enabled | JP4 | Pins 1 & 2 | | | | | closed | |---+--------------------------------+----------+------------| | | Floppy drive disabled | JP4 | Pins 2 & 3 | | | | | closed | |---+--------------------------------+----------+------------| |>> | Printer port is set to LPT2 | JP5 | Pins 1 & 2 | | | | | closed | |---+--------------------------------+----------+------------| | | Printer port is set to LPT3 | JP5 | Pins 2 & 3 | | | | | closed | |---+--------------------------------+----------+------------| |>> | IDE interface enabled | JP6 | Pins 1 & 2 | | | | | closed | |---+--------------------------------+----------+------------| | | IDE interface disabled | JP6 | Pins 2 & 3 | | | | | closed | |---+--------------------------------+----------+------------| |>> | Serial port 2 enabled | JP7 | Pins 1 & 2 | | | | | closed | |---+--------------------------------+----------+------------| | | Serial port 2 disabled | JP7 | Pins 2 & 3 | | | | | closed | |---+--------------------------------+----------+------------| |>> | Primary Hard Disk Controller | JP8 | Pins 1 & 2 | | | enabled | | closed | |---+--------------------------------+----------+------------| | | Primary Hard Disk Controller | JP8 | Pins 2 & 3 | | | disabled | | closed | +------------------------------------------------------------+