(TXT) View Source
       
       # CMD TECHNOLOGY, INC.
       
          CSA-6400E
       
          Card Type               Hard drive controller                  
          Hard Drives supported   Four IDE (AT) drives                   
          Floppy drives supported None                                   
          Data Bus                32-bit PCI                             
          Card Size               Half length, full-height               
       
 (IMG) IMG 1
          
       
          +------------------------------------------------------------+
          |                        CONNECTIONS                         |
          |------------------------------------------------------------|
          |     Function      | Location |     Function     | Location |
          |-------------------+----------+------------------+----------|
          | 40-pin secondary  |   CN1    | Drive active LED |   CN3    |
          | IDE(AT) connector |          |                  |          |
          |-------------------+----------+------------------+----------|
          | 40-pin primary    |   CN2    | Paddle board     |   CN4    |
          | IDE(AT) connector |          | connector        |          |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                 USER CONFIGURABLE SETTINGS                 |
          |------------------------------------------------------------|
          |             Function              |    Label    | Position |
          |-----------------------------------+-------------+----------|
          | » | DskChg (removable media)      |    W2/1     |   Open   |
          |   | disabled                      |             |          |
          |---+-------------------------------+-------------+----------|
          |   | DskChg (removable media)      |    W2/1     |  Closed  |
          |   | enabled                       |             |          |
          |---+-------------------------------+-------------+----------|
          | » | Base address enabled          |    W2/2     |  Closed  |
          |---+-------------------------------+-------------+----------|
          |   | Base address disabled         |    W2/2     |   Open   |
          |---+-------------------------------+-------------+----------|
          | » | PCI chip enabled              |    W2/3     |   Open   |
          |---+-------------------------------+-------------+----------|
          |   | PCI chip disabled             |    W2/3     |  Closed  |
          |---+-------------------------------+-------------+----------|
          | » | Factory configured - do not   |  W3/ 1 - 4  |   Open   |
          |   | alter                         |             |          |
          |---+-------------------------------+-------------+----------|
          | » | Factory configured - do not   |  W4/ 1 - 4  |   Open   |
          |   | alter                         |             |          |
          |---+-------------------------------+-------------+----------|
          | » | Factory configured - do not   |     W5      |   Open   |
          |   | alter                         |             |          |
          |---+-------------------------------+-------------+----------|
          | » | Normal base addressing        | W6/pins 2 & |  Closed  |
          |   | (Legacy mode) enabled         |      3      |          |
          |---+-------------------------------+-------------+----------|
          | » | Normal base addressing        | W7/pins 2 & |  Closed  |
          |   | (Legacy mode) enabled         |      3      |          |
          |------------------------------------------------------------|
          |      Note:W6 & W7 pins 1 & 2 positions are not used.       |
          +------------------------------------------------------------+