CMD TECHNOLOGY, INC.
====================

   CSA-6400E

   Card Type               Hard drive controller                  
   Hard Drives supported   Four IDE (AT) drives                   
   Floppy drives supported None                                   
   Data Bus                32-bit PCI                             
   Card Size               Half length, full-height               

<gopher://bitreich.org/I/th99/c/C-D/21423-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |     Function      | Location |     Function     | Location |
   |-------------------+----------+------------------+----------|
   | 40-pin secondary  |   CN1    | Drive active LED |   CN3    |
   | IDE(AT) connector |          |                  |          |
   |-------------------+----------+------------------+----------|
   | 40-pin primary    |   CN2    | Paddle board     |   CN4    |
   | IDE(AT) connector |          | connector        |          |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 USER CONFIGURABLE SETTINGS                 |
   |------------------------------------------------------------|
   |             Function              |    Label    | Position |
   |-----------------------------------+-------------+----------|
   |>> | DskChg (removable media)      |    W2/1     |   Open   |
   |   | disabled                      |             |          |
   |---+-------------------------------+-------------+----------|
   |   | DskChg (removable media)      |    W2/1     |  Closed  |
   |   | enabled                       |             |          |
   |---+-------------------------------+-------------+----------|
   |>> | Base address enabled          |    W2/2     |  Closed  |
   |---+-------------------------------+-------------+----------|
   |   | Base address disabled         |    W2/2     |   Open   |
   |---+-------------------------------+-------------+----------|
   |>> | PCI chip enabled              |    W2/3     |   Open   |
   |---+-------------------------------+-------------+----------|
   |   | PCI chip disabled             |    W2/3     |  Closed  |
   |---+-------------------------------+-------------+----------|
   |>> | Factory configured - do not   |  W3/ 1 - 4  |   Open   |
   |   | alter                         |             |          |
   |---+-------------------------------+-------------+----------|
   |>> | Factory configured - do not   |  W4/ 1 - 4  |   Open   |
   |   | alter                         |             |          |
   |---+-------------------------------+-------------+----------|
   |>> | Factory configured - do not   |     W5      |   Open   |
   |   | alter                         |             |          |
   |---+-------------------------------+-------------+----------|
   |>> | Normal base addressing        | W6/pins 2 & |  Closed  |
   |   | (Legacy mode) enabled         |      3      |          |
   |---+-------------------------------+-------------+----------|
   |>> | Normal base addressing        | W7/pins 2 & |  Closed  |
   |   | (Legacy mode) enabled         |      3      |          |
   |------------------------------------------------------------|
   |      Note:W6 & W7 pins 1 & 2 positions are not used.       |
   +------------------------------------------------------------+