(TXT) View Source
       
       # DATA TECHNOLOGY CORPORATION
       
          DTC 2130 (900148-89B)
       
          Data bus:                32-bit PCI                            
          Size:                    Full-length, full-height card         
          Hard drive supported:    Two IDE(AT) Interface drives          
          Floppy drives supported: None                                  
       
 (IMG) IMG 1
          
       
          +------------------------------------------------------------+
          |                        CONNECTIONS                         |
          |------------------------------------------------------------|
          |                  Function                  |   Location    |
          |--------------------------------------------+---------------|
          | 10-pin connector - header cable connection |      J1       |
          |--------------------------------------------+---------------|
          | 40-pin connector - IDE interface           |      J2       |
          |--------------------------------------------+---------------|
          | Drive activity LED                         |      LED      |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                 USER CONFIGURABLE SETTINGS                 |
          |------------------------------------------------------------|
          |               Function                | Location | Setting |
          |---------------------------------------+----------+---------|
          | PCI INTA redirected to IRQ14          |    W1    | closed  |
          |---------------------------------------+----------+---------|
          | PCI INTA not able to be redirected to |    W1    |  open   |
          | IRQ14                                 |          |         |
          +------------------------------------------------------------+
       
          +------------------------------------------------------------+
          |                MISCELLANEOUS TECHNICAL NOTE                |
          |------------------------------------------------------------|
          | Note:If your motherboard has an on-board IDE controller,   |
          | it will have to be disabled. The DTC 2130S                 |
          |------------------------------------------------------------|
          | needs access to IRQ14 in order to operate properly in the  |
          | PCI slot. Some motherboards allow you   redirect PCI INTA  |
          | to IRQ14. If the PCI motherboard won’t allow you to        |
          | redirect PCI interrrupts, then   you will need to use the  |
          | DTC 1415 Interrupt adapter. The DTC 1415 installs into any |
          | ISA B slot    and has a header (W1) compatible with the    |
          | DTC 2130S J1 header. The ISA A slot may still be     used  |
          | by an 8-bit card.                                          |
          +------------------------------------------------------------+