DATA TECHNOLOGY CORPORATION
===========================

   DTC 2130 (900148-89B)

   Data bus:                32-bit PCI                            
   Size:                    Full-length, full-height card         
   Hard drive supported:    Two IDE(AT) Interface drives          
   Floppy drives supported: None                                  

<gopher://bitreich.org/I/th99/c/C-D/20605-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |                  Function                  |   Location    |
   |--------------------------------------------+---------------|
   | 10-pin connector - header cable connection |      J1       |
   |--------------------------------------------+---------------|
   | 40-pin connector - IDE interface           |      J2       |
   |--------------------------------------------+---------------|
   | Drive activity LED                         |      LED      |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 USER CONFIGURABLE SETTINGS                 |
   |------------------------------------------------------------|
   |               Function                | Location | Setting |
   |---------------------------------------+----------+---------|
   | PCI INTA redirected to IRQ14          |    W1    | closed  |
   |---------------------------------------+----------+---------|
   | PCI INTA not able to be redirected to |    W1    |  open   |
   | IRQ14                                 |          |         |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                MISCELLANEOUS TECHNICAL NOTE                |
   |------------------------------------------------------------|
   | Note:If your motherboard has an on-board IDE controller,   |
   | it will have to be disabled. The DTC 2130S                 |
   |------------------------------------------------------------|
   | needs access to IRQ14 in order to operate properly in the  |
   | PCI slot. Some motherboards allow you   redirect PCI INTA  |
   | to IRQ14. If the PCI motherboard won't allow you to        |
   | redirect PCI interrrupts, then   you will need to use the  |
   | DTC 1415 Interrupt adapter. The DTC 1415 installs into any |
   | ISA B slot    and has a header (W1) compatible with the    |
   | DTC 2130S J1 header. The ISA A slot may still be     used  |
   | by an 8-bit card.                                          |
   +------------------------------------------------------------+