(TXT) View Source
# CONTROL CONCEPTS, INC.
16-BIT SCSI, IDE, FLOPPY, SERIAL & PARALLEL COMBINATION BOARD
(VERSION 2)
+------------------------------------------------------------+
|------------------------------------------------------------|
| Data bus: | 16-bit, ISA |
|---------------+--------------------------------------------|
| Size: | Three-quarter-length, full-height card |
|---------------+--------------------------------------------|
| Hard drive | IDE (AT) Interface drive, SCSI drives (2) |
| supported: | |
|---------------+--------------------------------------------|
| Floppy drives | Two 360KB, 720KB, 1.2MB, 1.44MB, or 2.88 |
| supported: | drives |
+------------------------------------------------------------+
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Location |
|----------------------------------------+-------------------|
| Floppy drive interface 1 | CN1 |
|----------------------------------------+-------------------|
| Floppy drive interface 2 | CN2 |
|----------------------------------------+-------------------|
| Serial port 4 | CN3 |
|----------------------------------------+-------------------|
| Serial port 3 | CN4 |
|----------------------------------------+-------------------|
| Serial port 2 | CN5 |
|----------------------------------------+-------------------|
| Serial port 1 | CN6 |
|----------------------------------------+-------------------|
| Parallel port 1 | CN7 |
|----------------------------------------+-------------------|
| IDE interface | CN8 |
|----------------------------------------+-------------------|
| Parallel port 2 | CN9 |
|----------------------------------------+-------------------|
| SCSI interface | CN10 |
|----------------------------------------+-------------------|
| SCSI interface 2 | CN11 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Location | Setting |
|---------------------------------------+----------+---------|
| » | 2.88MB Floppy drive mode disabled | JB1/A | Open |
|---+-----------------------------------+----------+---------|
| | 2.88MB Floppy drive mode enabled | JB1/A | Pins 2 |
| | (w/pin 33 as 2nd enable line) | | & 3 |
|---+-----------------------------------+----------+---------|
| | 2.88MB Floppy drive mode enabled | JB1/A | Pins 1 |
| | (standard enabling) | | & 2 |
|---+-----------------------------------+----------+---------|
| » | Factory configured - do not alter | JB3/A | N/A |
|---+-----------------------------------+----------+---------|
| » | Factory configured - do not alter | JB3/B | N/A |
|---+-----------------------------------+----------+---------|
| » | Factory configured - do not alter | JB3/C | N/A |
|---+-----------------------------------+----------+---------|
| » | Factory configured - do not alter | JB3/D | N/A |
|---+-----------------------------------+----------+---------|
| » | No termination power to external | JB6/A | Open |
| | SCSI interface | | |
|---+-----------------------------------+----------+---------|
| | 5V termination power to external | JB6/A | Closed |
| | SCSI interface | | |
|---+-----------------------------------+----------+---------|
| » | Factory configured - do not alter | JB6/D | N/A |
|---+-----------------------------------+----------+---------|
| » | I/O Address 330h - 33Fh | JB6/E | Open |
|---+-----------------------------------+----------+---------|
| | I/O Address 230h - 23Fh | JB6/E | Closed |
|---+-----------------------------------+----------+---------|
| » | SCSI protocol asynchronous | JB6/F | Open |
|---+-----------------------------------+----------+---------|
| | SCSI protocol synchronous | JB6/F | Closed |
|---+-----------------------------------+----------+---------|
| » | SCSI device ID 7 | JB6/G | Open |
|---+-----------------------------------+----------+---------|
| | SCSI device ID 6 | JB6/G | Closed |
|---+-----------------------------------+----------+---------|
| » | SCSI parity enabled | JB6/H | Open |
|---+-----------------------------------+----------+---------|
| | SCSI parity disabled | JB6/H | Closed |
|---+-----------------------------------+----------+---------|
| » | Factory configured - do not alter | JB6/K | N/A |
|---+-----------------------------------+----------+---------|
| » | ROM enabled | JB6/L | Closed |
|---+-----------------------------------+----------+---------|
| | ROM disabled | JB6/L | Open |
|---+-----------------------------------+----------+---------|
| » | Factory configured - do not alter | JB6/M | N/A |
|---+-----------------------------------+----------+---------|
| » | Zero wait state disabled | JB6/N | Open |
|---+-----------------------------------+----------+---------|
| | Zero wait state enabled | JB6/N | Closed |
|---+-----------------------------------+----------+---------|
| » | Factory configured - do not alter | JB/7 | N/A |
+------------------------------------------------------------+
+------------------------------------------------------------+
| IDE CONFIGURATION |
|------------------------------------------------------------|
| Setting | JB1/B | JB1/C |
|----------------------------------+------------+------------|
| » | IDE interface enabled | Pins 2 & 3 | Pins 1 & 2 |
| | (address 1F0h - 1F7h) | closed | closed |
|---+------------------------------+------------+------------|
| | IDE interface enabled | Pins 1 & 2 | Pins 1 & 2 |
| | (address 170h - 177h) | closed | closed |
|---+------------------------------+------------+------------|
| | IDE interface disabled | Pins 2 & 3 | Pins 2 & 3 |
| | | closed | closed |
|---+------------------------------+------------+------------|
| | Reserved for future use | Pins 1 & 2 | Pins 1 & 2 |
| | | closed | closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| FLOPPY DRIVE CONFIGURATION |
|------------------------------------------------------------|
| Setting | JB1/D | JB1/E |
|----------------------------------+------------+------------|
| » | Floppy drive interface | Pins 2 & 3 | Pins 1 & 2 |
| | enabled (address 3F0h - | closed | closed |
| | 3F7h) | | |
|---+------------------------------+------------+------------|
| | Floppy drive interface | Pins 1 & 2 | Pins 1 & 2 |
| | enabled (address 370h - | closed | closed |
| | 377h) | | |
|---+------------------------------+------------+------------|
| | Floppy drive interface | Pins 2 & 3 | Pins 2 & 3 |
| | disabled | closed | closed |
|---+------------------------------+------------+------------|
| | Reserved for future use | Pins 1 & 2 | Pins 2 & 3 |
| | | closed | closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| PRIMARY PARALLEL PORT CONFIGURATION |
|------------------------------------------------------------|
| Setting | JB1/F | JB1/G |
|--------------------------------+-------------+-------------|
| » | Unidirectional mode | Pins 2 & 3 | Pins 2 & 3 |
| | enabled | closed | closed |
|---+----------------------------+-------------+-------------|
| | Bi-directional mode | Pins 1 & 2 | Pins 2 & 3 |
| | enabled | closed | closed |
|---+----------------------------+-------------+-------------|
| | Reserved for future use | Pins 2 & 3 | Pins 1 & 2 |
| | | closed | closed |
|---+----------------------------+-------------+-------------|
| | Reserved for future use | Pins 1 & 2 | Pins 1 & 2 |
| | | closed | closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| PRIMARY PARALLEL PORT ADDRESS SELECT |
|------------------------------------------------------------|
| LPT | JB1/H | JB1/I |
|--------------------+-------------------+-------------------|
| » | 1 | Pins 2 & 3 closed | Pins 1 & 2 closed |
|---+----------------+-------------------+-------------------|
| | 2 | Pins 1 & 2 closed | Pins 1 & 2 closed |
|---+----------------+-------------------+-------------------|
| | 3 | Pins 1 & 2 closed | Pins 2 & 3 closed |
|---+----------------+-------------------+-------------------|
| | Disabled | Pins 2 & 3 closed | Pins 2 & 3 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| PRIMARY PARALLEL PORT INTERRUPT SELECT |
|------------------------------------------------------------|
| IRQ | JB4/E |
|----------------------------+-------------------------------|
| » | IRQ7 | Pins 1 & 2 closed |
|-------+--------------------+-------------------------------|
| | IRQ5 | Pins 2 & 3 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SECOND PARALLEL PORT CONFIGURATION |
|------------------------------------------------------------|
| Setting | JB2/A | JB2/B |
|--------------------------------+-------------+-------------|
| » | Unidirectional mode | Pins 2 & 3 | Pins 2 & 3 |
| | enabled | closed | closed |
|---+----------------------------+-------------+-------------|
| | Bi-directional mode | Pins 1 & 2 | Pins 2 & 3 |
| | enabled | closed | closed |
|---+----------------------------+-------------+-------------|
| | Reserved for future use | Pins 2 & 3 | Pins 1 & 2 |
| | | closed | closed |
|---+----------------------------+-------------+-------------|
| | Reserved for future use | Pins 1 & 2 | Pins 1 & 2 |
| | | closed | closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SECOND PARALLEL PORT ADDRESS SELECT |
|------------------------------------------------------------|
| LPT | JB2/C | JB2/D |
|--------------------+-------------------+-------------------|
| » | LPT2 | Pins 1 & 2 closed | Pins 1 & 2 closed |
|---+----------------+-------------------+-------------------|
| | LPT1 | Pins 2 & 3 closed | Pins 1 & 2 closed |
|---+----------------+-------------------+-------------------|
| | LPT3 | Pins 1 & 2 closed | Pins 2 & 3 closed |
|---+----------------+-------------------+-------------------|
| | Disabled | Pins 2 & 3 closed | Pins 2 & 3 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SECOND PARALLEL PORT INTERRUPT SELECT |
|------------------------------------------------------------|
| IRQ | JB4/F |
|----------------------------+-------------------------------|
| » | IRQ5 | Pins 2 & 3 closed |
|------+---------------------+-------------------------------|
| | IRQ7 | Pins 1 & 2 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| PRIMARY SERIAL PORT ADDRESS SELECT |
|------------------------------------------------------------|
| Port 1 (CN6) | JB1/L | JB1/M |
|--------------------+-------------------+-------------------|
| » | COM1 | Pins 1 & 2 closed | Pins 1 & 2 closed |
|---+----------------+-------------------+-------------------|
| | COM2 | Pins 2 & 3 closed | Pins 1 & 2 closed |
|---+----------------+-------------------+-------------------|
| | COM3 | Pins 1 & 2 closed | Pins 2 & 3 closed |
|---+----------------+-------------------+-------------------|
| | Disabled | Pins 2 & 3 closed | Pins 2 & 3 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| PRIMARY SERIAL PORT INTERRUPT SELECT |
|------------------------------------------------------------|
| IRQ | JB4/A |
|----------------------------+-------------------------------|
| » | IRQ4 | Pins 1 & 2 closed |
|------+---------------------+-------------------------------|
| | IRQ3 | Pins 2 & 3 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SECOND SERIAL PORT ADDRESS SELECT |
|------------------------------------------------------------|
| Port 2 (CN5) | JB1/J | JB1/K |
|--------------------+-------------------+-------------------|
| » | COM2 | Pins 1 & 2 closed | Pins 1 & 2 closed |
|---+----------------+-------------------+-------------------|
| | COM1 | Pins 2 & 3 closed | Pins 1 & 2 closed |
|---+----------------+-------------------+-------------------|
| | COM4 | Pins 1 & 2 closed | Pins 2 & 3 closed |
|---+----------------+-------------------+-------------------|
| | Disabled | Pins 2 & 3 closed | Pins 2 & 3 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SECOND SERIAL PORT INTERRUPT SELECT |
|------------------------------------------------------------|
| IRQ | JB4/B |
|----------------------------+-------------------------------|
| » | IRQ3 | Pins 2 & 3 closed |
|------+---------------------+-------------------------------|
| | IRQ4 | Pins 1 & 2 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| THIRD SERIAL PORT ADDRESS SELECT |
|------------------------------------------------------------|
| Port 3 (CN4) | JB2/G | JB2/H |
|--------------------+-------------------+-------------------|
| » | COM3 | Pins 1 & 2 closed | Pins 2 & 3 closed |
|---+----------------+-------------------+-------------------|
| | COM1 | Pins 1 & 2 closed | Pins 1 & 2 closed |
|---+----------------+-------------------+-------------------|
| | COM2 | Pins 2 & 3 closed | Pins 1 & 2 closed |
|---+----------------+-------------------+-------------------|
| | Disabled | Pins 2 & 3 closed | Pins 2 & 3 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| THIRD SERIAL PORT INTERRUPT SELECT |
|------------------------------------------------------------|
| IRQ | JB4/C |
|----------------------------+-------------------------------|
| » | IRQ4 | Pins 1 & 2 closed |
|-----+----------------------+-------------------------------|
| | IRQ3 | Pins 2 & 3 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| FOURTH SERIAL PORT ADDRESS SELECT |
|------------------------------------------------------------|
| Port 4 (CN3) | JB2/E | JB2/F |
|--------------------+-------------------+-------------------|
| » | COM4 | Pins 1 & 2 closed | Pins 2 & 3 closed |
|---+----------------+-------------------+-------------------|
| | COM1 | Pins 2 & 3 closed | Pins 1 & 2 closed |
|---+----------------+-------------------+-------------------|
| | COM2 | Pins 1 & 2 closed | Pins 1 & 2 closed |
|---+----------------+-------------------+-------------------|
| | Disabled | Pins 2 & 3 closed | Pins 2 & 3 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| FOURTH SERIAL PORT INTERRUPT SELECT |
|------------------------------------------------------------|
| IRQ | JB4/D |
|----------------------------+-------------------------------|
| » | IRQ3 | Pins 2 & 3 closed |
|------+---------------------+-------------------------------|
| | IRQ4 | Pins 1 & 2 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| INTERRUPT SELECT |
|------------------------------------------------------------|
| IRQ | JB6/I | JB6/J | JB3/E | JB3/F | JB3/G | JB3/H |
|-------+--------+--------+--------+--------+--------+-------|
| IRQ11 | Open | Open | Open | Open | Closed | Open |
|-------+--------+--------+--------+--------+--------+-------|
| IRQ10 | Closed | Open | Open | Open | Open |Closed |
|-------+--------+--------+--------+--------+--------+-------|
| IRQ12 | Closed | Closed | Open | Closed | Open | Open |
|-------+--------+--------+--------+--------+--------+-------|
| IRQ15 | Open | Closed | Closed | Open | Open | Open |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BASE MEMORY ADDRESS SELECT |
|------------------------------------------------------------|
| Address | JB6/B | JB6/C |
|----------------------+------------------+------------------|
| » | C8000h | Open | Open |
|---+------------------+------------------+------------------|
| | CC000h | Open | Closed |
|---+------------------+------------------+------------------|
| | D8000h | Closed | Open |
|---+------------------+------------------+------------------|
| | DC000h | Closed | Closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| LED SOURCE CONFIGURATION |
|------------------------------------------------------------|
| Setting | JB5 |
|----------------------------------------+-------------------|
| » | LED functions with IDE activity | Pins 2 & 3 closed |
|---+------------------------------------+-------------------|
| | LED functions with SCSI activity | Pins 1 & 2 closed |
|---+------------------------------------+-------------------|
| | LED funtions with both IDE and | Pins 4 & 5 closed |
| | SCSI activity | |
+------------------------------------------------------------+