CONTROL CONCEPTS, INC. ====================== 16-BIT SCSI, IDE, FLOPPY, SERIAL & PARALLEL COMBINATION BOARD (VERSION 2) +------------------------------------------------------------+ |------------------------------------------------------------| | Data bus: | 16-bit, ISA | |---------------+--------------------------------------------| | Size: | Three-quarter-length, full-height card | |---------------+--------------------------------------------| | Hard drive | IDE (AT) Interface drive, SCSI drives (2) | | supported: | | |---------------+--------------------------------------------| | Floppy drives | Two 360KB, 720KB, 1.2MB, 1.44MB, or 2.88 | | supported: | drives | +------------------------------------------------------------+ +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Location | |----------------------------------------+-------------------| | Floppy drive interface 1 | CN1 | |----------------------------------------+-------------------| | Floppy drive interface 2 | CN2 | |----------------------------------------+-------------------| | Serial port 4 | CN3 | |----------------------------------------+-------------------| | Serial port 3 | CN4 | |----------------------------------------+-------------------| | Serial port 2 | CN5 | |----------------------------------------+-------------------| | Serial port 1 | CN6 | |----------------------------------------+-------------------| | Parallel port 1 | CN7 | |----------------------------------------+-------------------| | IDE interface | CN8 | |----------------------------------------+-------------------| | Parallel port 2 | CN9 | |----------------------------------------+-------------------| | SCSI interface | CN10 | |----------------------------------------+-------------------| | SCSI interface 2 | CN11 | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Location | Setting | |---------------------------------------+----------+---------| |>> | 2.88MB Floppy drive mode disabled | JB1/A | Open | |---+-----------------------------------+----------+---------| | | 2.88MB Floppy drive mode enabled | JB1/A | Pins 2 | | | (w/pin 33 as 2nd enable line) | | & 3 | |---+-----------------------------------+----------+---------| | | 2.88MB Floppy drive mode enabled | JB1/A | Pins 1 | | | (standard enabling) | | & 2 | |---+-----------------------------------+----------+---------| |>> | Factory configured - do not alter | JB3/A | N/A | |---+-----------------------------------+----------+---------| |>> | Factory configured - do not alter | JB3/B | N/A | |---+-----------------------------------+----------+---------| |>> | Factory configured - do not alter | JB3/C | N/A | |---+-----------------------------------+----------+---------| |>> | Factory configured - do not alter | JB3/D | N/A | |---+-----------------------------------+----------+---------| |>> | No termination power to external | JB6/A | Open | | | SCSI interface | | | |---+-----------------------------------+----------+---------| | | 5V termination power to external | JB6/A | Closed | | | SCSI interface | | | |---+-----------------------------------+----------+---------| |>> | Factory configured - do not alter | JB6/D | N/A | |---+-----------------------------------+----------+---------| |>> | I/O Address 330h - 33Fh | JB6/E | Open | |---+-----------------------------------+----------+---------| | | I/O Address 230h - 23Fh | JB6/E | Closed | |---+-----------------------------------+----------+---------| |>> | SCSI protocol asynchronous | JB6/F | Open | |---+-----------------------------------+----------+---------| | | SCSI protocol synchronous | JB6/F | Closed | |---+-----------------------------------+----------+---------| |>> | SCSI device ID 7 | JB6/G | Open | |---+-----------------------------------+----------+---------| | | SCSI device ID 6 | JB6/G | Closed | |---+-----------------------------------+----------+---------| |>> | SCSI parity enabled | JB6/H | Open | |---+-----------------------------------+----------+---------| | | SCSI parity disabled | JB6/H | Closed | |---+-----------------------------------+----------+---------| |>> | Factory configured - do not alter | JB6/K | N/A | |---+-----------------------------------+----------+---------| |>> | ROM enabled | JB6/L | Closed | |---+-----------------------------------+----------+---------| | | ROM disabled | JB6/L | Open | |---+-----------------------------------+----------+---------| |>> | Factory configured - do not alter | JB6/M | N/A | |---+-----------------------------------+----------+---------| |>> | Zero wait state disabled | JB6/N | Open | |---+-----------------------------------+----------+---------| | | Zero wait state enabled | JB6/N | Closed | |---+-----------------------------------+----------+---------| |>> | Factory configured - do not alter | JB/7 | N/A | +------------------------------------------------------------+ +------------------------------------------------------------+ | IDE CONFIGURATION | |------------------------------------------------------------| | Setting | JB1/B | JB1/C | |----------------------------------+------------+------------| |>> | IDE interface enabled | Pins 2 & 3 | Pins 1 & 2 | | | (address 1F0h - 1F7h) | closed | closed | |---+------------------------------+------------+------------| | | IDE interface enabled | Pins 1 & 2 | Pins 1 & 2 | | | (address 170h - 177h) | closed | closed | |---+------------------------------+------------+------------| | | IDE interface disabled | Pins 2 & 3 | Pins 2 & 3 | | | | closed | closed | |---+------------------------------+------------+------------| | | Reserved for future use | Pins 1 & 2 | Pins 1 & 2 | | | | closed | closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | FLOPPY DRIVE CONFIGURATION | |------------------------------------------------------------| | Setting | JB1/D | JB1/E | |----------------------------------+------------+------------| |>> | Floppy drive interface | Pins 2 & 3 | Pins 1 & 2 | | | enabled (address 3F0h - | closed | closed | | | 3F7h) | | | |---+------------------------------+------------+------------| | | Floppy drive interface | Pins 1 & 2 | Pins 1 & 2 | | | enabled (address 370h - | closed | closed | | | 377h) | | | |---+------------------------------+------------+------------| | | Floppy drive interface | Pins 2 & 3 | Pins 2 & 3 | | | disabled | closed | closed | |---+------------------------------+------------+------------| | | Reserved for future use | Pins 1 & 2 | Pins 2 & 3 | | | | closed | closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | PRIMARY PARALLEL PORT CONFIGURATION | |------------------------------------------------------------| | Setting | JB1/F | JB1/G | |--------------------------------+-------------+-------------| |>> | Unidirectional mode | Pins 2 & 3 | Pins 2 & 3 | | | enabled | closed | closed | |---+----------------------------+-------------+-------------| | | Bi-directional mode | Pins 1 & 2 | Pins 2 & 3 | | | enabled | closed | closed | |---+----------------------------+-------------+-------------| | | Reserved for future use | Pins 2 & 3 | Pins 1 & 2 | | | | closed | closed | |---+----------------------------+-------------+-------------| | | Reserved for future use | Pins 1 & 2 | Pins 1 & 2 | | | | closed | closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | PRIMARY PARALLEL PORT ADDRESS SELECT | |------------------------------------------------------------| | LPT | JB1/H | JB1/I | |--------------------+-------------------+-------------------| |>> | 1 | Pins 2 & 3 closed | Pins 1 & 2 closed | |---+----------------+-------------------+-------------------| | | 2 | Pins 1 & 2 closed | Pins 1 & 2 closed | |---+----------------+-------------------+-------------------| | | 3 | Pins 1 & 2 closed | Pins 2 & 3 closed | |---+----------------+-------------------+-------------------| | | Disabled | Pins 2 & 3 closed | Pins 2 & 3 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | PRIMARY PARALLEL PORT INTERRUPT SELECT | |------------------------------------------------------------| | IRQ | JB4/E | |----------------------------+-------------------------------| |>> | IRQ7 | Pins 1 & 2 closed | |-------+--------------------+-------------------------------| | | IRQ5 | Pins 2 & 3 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | SECOND PARALLEL PORT CONFIGURATION | |------------------------------------------------------------| | Setting | JB2/A | JB2/B | |--------------------------------+-------------+-------------| |>> | Unidirectional mode | Pins 2 & 3 | Pins 2 & 3 | | | enabled | closed | closed | |---+----------------------------+-------------+-------------| | | Bi-directional mode | Pins 1 & 2 | Pins 2 & 3 | | | enabled | closed | closed | |---+----------------------------+-------------+-------------| | | Reserved for future use | Pins 2 & 3 | Pins 1 & 2 | | | | closed | closed | |---+----------------------------+-------------+-------------| | | Reserved for future use | Pins 1 & 2 | Pins 1 & 2 | | | | closed | closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | SECOND PARALLEL PORT ADDRESS SELECT | |------------------------------------------------------------| | LPT | JB2/C | JB2/D | |--------------------+-------------------+-------------------| |>> | LPT2 | Pins 1 & 2 closed | Pins 1 & 2 closed | |---+----------------+-------------------+-------------------| | | LPT1 | Pins 2 & 3 closed | Pins 1 & 2 closed | |---+----------------+-------------------+-------------------| | | LPT3 | Pins 1 & 2 closed | Pins 2 & 3 closed | |---+----------------+-------------------+-------------------| | | Disabled | Pins 2 & 3 closed | Pins 2 & 3 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | SECOND PARALLEL PORT INTERRUPT SELECT | |------------------------------------------------------------| | IRQ | JB4/F | |----------------------------+-------------------------------| |>> | IRQ5 | Pins 2 & 3 closed | |------+---------------------+-------------------------------| | | IRQ7 | Pins 1 & 2 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | PRIMARY SERIAL PORT ADDRESS SELECT | |------------------------------------------------------------| | Port 1 (CN6) | JB1/L | JB1/M | |--------------------+-------------------+-------------------| |>> | COM1 | Pins 1 & 2 closed | Pins 1 & 2 closed | |---+----------------+-------------------+-------------------| | | COM2 | Pins 2 & 3 closed | Pins 1 & 2 closed | |---+----------------+-------------------+-------------------| | | COM3 | Pins 1 & 2 closed | Pins 2 & 3 closed | |---+----------------+-------------------+-------------------| | | Disabled | Pins 2 & 3 closed | Pins 2 & 3 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | PRIMARY SERIAL PORT INTERRUPT SELECT | |------------------------------------------------------------| | IRQ | JB4/A | |----------------------------+-------------------------------| |>> | IRQ4 | Pins 1 & 2 closed | |------+---------------------+-------------------------------| | | IRQ3 | Pins 2 & 3 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | SECOND SERIAL PORT ADDRESS SELECT | |------------------------------------------------------------| | Port 2 (CN5) | JB1/J | JB1/K | |--------------------+-------------------+-------------------| |>> | COM2 | Pins 1 & 2 closed | Pins 1 & 2 closed | |---+----------------+-------------------+-------------------| | | COM1 | Pins 2 & 3 closed | Pins 1 & 2 closed | |---+----------------+-------------------+-------------------| | | COM4 | Pins 1 & 2 closed | Pins 2 & 3 closed | |---+----------------+-------------------+-------------------| | | Disabled | Pins 2 & 3 closed | Pins 2 & 3 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | SECOND SERIAL PORT INTERRUPT SELECT | |------------------------------------------------------------| | IRQ | JB4/B | |----------------------------+-------------------------------| |>> | IRQ3 | Pins 2 & 3 closed | |------+---------------------+-------------------------------| | | IRQ4 | Pins 1 & 2 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | THIRD SERIAL PORT ADDRESS SELECT | |------------------------------------------------------------| | Port 3 (CN4) | JB2/G | JB2/H | |--------------------+-------------------+-------------------| |>> | COM3 | Pins 1 & 2 closed | Pins 2 & 3 closed | |---+----------------+-------------------+-------------------| | | COM1 | Pins 1 & 2 closed | Pins 1 & 2 closed | |---+----------------+-------------------+-------------------| | | COM2 | Pins 2 & 3 closed | Pins 1 & 2 closed | |---+----------------+-------------------+-------------------| | | Disabled | Pins 2 & 3 closed | Pins 2 & 3 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | THIRD SERIAL PORT INTERRUPT SELECT | |------------------------------------------------------------| | IRQ | JB4/C | |----------------------------+-------------------------------| |>> | IRQ4 | Pins 1 & 2 closed | |-----+----------------------+-------------------------------| | | IRQ3 | Pins 2 & 3 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | FOURTH SERIAL PORT ADDRESS SELECT | |------------------------------------------------------------| | Port 4 (CN3) | JB2/E | JB2/F | |--------------------+-------------------+-------------------| |>> | COM4 | Pins 1 & 2 closed | Pins 2 & 3 closed | |---+----------------+-------------------+-------------------| | | COM1 | Pins 2 & 3 closed | Pins 1 & 2 closed | |---+----------------+-------------------+-------------------| | | COM2 | Pins 1 & 2 closed | Pins 1 & 2 closed | |---+----------------+-------------------+-------------------| | | Disabled | Pins 2 & 3 closed | Pins 2 & 3 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | FOURTH SERIAL PORT INTERRUPT SELECT | |------------------------------------------------------------| | IRQ | JB4/D | |----------------------------+-------------------------------| |>> | IRQ3 | Pins 2 & 3 closed | |------+---------------------+-------------------------------| | | IRQ4 | Pins 1 & 2 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | INTERRUPT SELECT | |------------------------------------------------------------| | IRQ | JB6/I | JB6/J | JB3/E | JB3/F | JB3/G | JB3/H | |-------+--------+--------+--------+--------+--------+-------| | IRQ11 | Open | Open | Open | Open | Closed | Open | |-------+--------+--------+--------+--------+--------+-------| | IRQ10 | Closed | Open | Open | Open | Open |Closed | |-------+--------+--------+--------+--------+--------+-------| | IRQ12 | Closed | Closed | Open | Closed | Open | Open | |-------+--------+--------+--------+--------+--------+-------| | IRQ15 | Open | Closed | Closed | Open | Open | Open | +------------------------------------------------------------+ +------------------------------------------------------------+ | BASE MEMORY ADDRESS SELECT | |------------------------------------------------------------| | Address | JB6/B | JB6/C | |----------------------+------------------+------------------| |>> | C8000h | Open | Open | |---+------------------+------------------+------------------| | | CC000h | Open | Closed | |---+------------------+------------------+------------------| | | D8000h | Closed | Open | |---+------------------+------------------+------------------| | | DC000h | Closed | Closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | LED SOURCE CONFIGURATION | |------------------------------------------------------------| | Setting | JB5 | |----------------------------------------+-------------------| |>> | LED functions with IDE activity | Pins 2 & 3 closed | |---+------------------------------------+-------------------| | | LED functions with SCSI activity | Pins 1 & 2 closed | |---+------------------------------------+-------------------| | | LED funtions with both IDE and | Pins 4 & 5 closed | | | SCSI activity | | +------------------------------------------------------------+