

                           wcSysop Pager v1.0

               32-bit WcCode replacment for Page Sysop.wcx 
                           (for Wildcat!5 only)                   
                               
                         Written by Kenneth Hines   
              (C) 1996 Kenneth Hines - All Rights Reserved


                               Support BBS:
               Kenneth's Online Experience - (540) 755-4199 
                            a Wildcat!5 System

                         
  *************************************************************************

  Disclaimer 
  **********

  THIS PROGRAM IS PROVIDED "AS IS" AND WITHOUT ANY WARRANTY OF ANY KIND,
  EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

  THE AUTHOR WILL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM
  THE USE OF THIS PROGRAM.

  *************************************************************************

  Copyright
  *********

  wcSysop Pager v1.0 is public domain software. You may use as many copies
  as needed by your system and redistribute the archive as long as ALL 
  files are left unaltered. You may not sell or rent copies of this program.
 
  Wildcat!, WcCODE, wcDraw, wcMenu, wcLocal and MSI HQ are trademarks of 
  Mustang Software, Inc.

  *************************************************************************

  Files included in the Archive
  *****************************

  The following files should be included in the .zip archive:

  Page Sysop.wcx           / the WcCode program
  File_id.diz              / the archive description
  Readme.txt               / the file your viewing now
  Page Sysop.cfg           / the configuration file
  Page the Sysop.bbs       / the programs display file

  If any of the above files are NOT included in the wcSP10.zip
  you have downloaded, please call the support board above for a
  complete copy of this program.

  *************************************************************************

  Overview of Setup
  ***************** 

  Must have a sound card setup in Windows before proceeding.

  Copy the Page Sysop.wcx to your Wildcat!5 Home directory. Example: C:\WC5

  Copy the Page Sysop.cfg file to your Wildcat!5 Data directory. Example:
  C:\WC5\Data 
 
  Edit the Page Sysop.cfg file as follows:

  Line 1   Path to the wav file you wish to hear when being paged.

  Line 2   Number of times to play the wav file. Valid numbers are 1 to 10.

  Line 3   Hot Key to answer page with. You may choose from the following:

           Home
           Insert
           Delete
           End
           Page Up
           Page Down
           Up Arrow
           Down arrow
           Left Arrow
           Right Arrow

   
  Copy the Page the Sysop.bbs file to your Wildcat!5 Display directory.
  Example: C:\WC5\Disp

  Edit the display file in wcDraw. The page the Sysop.bbs file cannot be
  longer than 20 lines.

  If you are still using the defalut Wildcat!5 page sysop command then
  Start wcLocal and test.

  If you are using a different sysop pager then, go to wcMenu and add or
  change the menu command for the page sysop. Make sure that the program
  to be run is Page Sysop. Start wcLocal and test.

  Setup is completed.

  If you encounter any problems or have a suggestion, please contact the
  support board above or send a message to

  Kenneth Hines on MSI HQ BBS  or

  Internet E-mail to KaHines@tcia.net

  Homepage for Kenneth Hines Software is:

  http://www.tcia.net/~kahines/



