                                      -* SDWho's Online *-


-* About Who's Online *-

The SDWho's Online is like no other Who's online it gives the user ability to Page, Get Info,
and Enter Live Chat with a user Listed in the Who's Online. This program has never been
run on another system other than mine you are installing this at your own risk.  I am
not gonna be held responsible for ANY damage this program may create on your system.

**NOTE: YOU NEED TO USE A 32BIT FILE EXTRACTOR OR THIS PROGRAM WILL NOT FUNCTION PROPERLY!!! 
YOU ALSO SHOULD NOT EDIT THE *.BBS SCREENS!!!  THIS WILL CAUSE THE PROGRAM TO NOT FUNCTION
PROPERLY!  IF YOU NEED YOUR ANSI'S SCREENS REDONE OR PERSONALIZED YOU MUST CONTACT ME AND
I WILL BE ABLE TO HELP YOU!

THIS VERSION CONTAINS THE DIAL UP NODES NOT SHOWING PROBLEM!


-* Installing *-

Ok... to install this bad boy it does not take all that much thought!  Just follow my lead
but if any thing is to go wrong DO let me know.  You can reach me at the areas located
at the end of this documentation!

1.)  Unzip SDWO##.ZIP in to ANY directory as long as you keep up with the files...
2.)  Now Open up your SDWIO.CFG into any Text Editor and change the paths to locate
 you different Top/Bottom Displays.

Line 1 - Registration Number (00000000 if None)
Line 2 - SysOp User Name, The name you are known as online.
         (Use ALL CAPS!!!)
Line 3 - BBS Name
Line 4 - Path and Filename to the WOHEAD.BBS
Line 5 - Path and Filename to the WOBOTT.BBS
Line 6 - Do you run wcTELE?  (Y = Yes, N = No)
Line 7 - The full path to the wcTELE home directory 
         (usually C:\WC5\WCTELE\)

There should only be 4 paths above the dotted line!  You do not need
a trailing backslash!

NOTE! There should only be 4 lines above the dotted line!!!

3.) If you wish to block access to the Live Chat Command you are able to do so by
editing the wonochat.dat file to contain the access levels you do not want to
allow access to the Live Chat Option. You must keep this file stored in your
Wildcat Data Directory (usually C:\WC5\DATA\).  If you do not want to use this option
you may skip this step!

NOTE! There should ONLY be one access level per line!

4.)  Now copy the following files to the following places:

SDWIO.CFG to your DATA directory
Who is Online.WCX to your WC5 Home directory

5.)  Now open up wcMENU and add the following commands in ANY Menu of your choice this is
not needed to be done unless your current Who is Online file name is nor Who is Online.

Selection Key : W
Description   : [W].............Who is Online
Command Type  : Run wcCODE Program
Program       : Who is Online
Parameters    :

Now the Selection Key it is up to you what you want I just gave you mine.  Also you see
that the Parameters line is blank... DO NOT NEED ONE!!!

6.)  Ok... Now Logon wcLOCAL and check it out it should load fine.  If there are any problems
first be sure your paths are correct in your SDWIO.CFG file then let me know.

-* Registration Stuff *-

Read the Register.doc for more info!


-* How to Reach Me *-

Ok... here is some info on where to find me in this small world =) 
(Updated as of 2/7/99!!!)

Address        : P.O. Box 591
		 Hampton VA, 23669
E-Mail Address : sdsoft@pinn.net
BBS#           : 757-851-4039 
Internet at    : http://sdsoft.pinn.net
                 telnet://sdsoft.pinn.net
		 ftp://sdsoft.pinn.net
