        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
                   
        
        
                                        ڿ     ڿ            ڿ
                                                         
                                                         
                                                         
                          ¿ ¿  Ĵ ¿ Ĵ
                                         
                                         
                                       
                                           
                                      ڿ   
                          Ĵ     
                              
                              
                      ڿ                        GoldED+ 1.0.0
                                        
        
        
                   
        
        
        
                                   Reference Manual
        
        
                            Program and manual written by 
                      Odinn Sorensen, Dirk A. Mueller and others
        
        
                       Copyright (C) 1990-1999 by Odinn Sorensen
        











        ______________________________________________________________________
                                                                              
                                   Table of Contents                          
        ______________________________________________________________________
                                                                              

        1.  Commandline Reference .......................................... 1
            Commandline syntax ............................................. 1
            Commandline keystacking ........................................ 3

        2.  Environment Variables .......................................... 5
            GOLDED ......................................................... 5
            GEDCMD ......................................................... 5
            GOLDNODE ....................................................... 5

        3.  Batchfile Errorlevels .......................................... 6

        4.  Nodelist and Userlist Support .................................. 8
            GoldNODE commandline syntax .................................... 8

        5.  Configuration Control ......................................... 10
            IF <condition> ................................................ 10
            ELIF <condition> .............................................. 10
            ELSEIF <condition> ............................................ 10
            ELSE .......................................................... 10
            ENDIF ......................................................... 10
            IGNORE ........................................................ 10
            INCLUDE <file> ................................................ 11
            REM ........................................................... 11

        6.  Configuration Keyword Reference ............................... 12
            ADDRESS <zone:net/node[.point][@domain][, pointnet]> .......... 12
            ADDRESSBOOKADD <yes/no/always> ................................ 12
            ADDRESSLOOKUPFIRST <MsgID/Origin> ............................. 13
            ADDRESSMACRO <macro>,<name>,<address>[,"subject"][,attribs] ... 13
            ADEPTXBBSPATH <path> .......................................... 14
            ADEPTXBBSUSERNO <userno> ...................................... 14
            AKA <zone:net/node[.point][@domain][, pointnet]> .............. 14
            AKAMATCH <match> <aka> ........................................ 14
            AKAMATCHECHO <yes/no> ......................................... 15
            AKAMATCHING <yes/no> .......................................... 15
            AKAMATCHLOCAL <yes/no> ........................................ 15
            AKAMATCHNET <yes/no> .......................................... 15
            APP <programname> [keyword and/or parameters] ................. 15
            AREA <echoid> <"desc"> <msgbase>[type] <loc> [akano] [attrs] .. 15
            AREAAUTOID <verbose/long/short> ............................... 16
            AREAAUTONEXT <yes/no> ......................................... 16
            AREACATCHUPREAD <yes/no> ...................................... 17
            AREACOPYADDID <yes/no> ........................................ 17
            AREACOPYDIRECT <yes/no> ....................................... 17
            AREACOPYTO <echoid> ........................................... 17
            AREADEF <setup> ............................................... 17
            AREADESC <echoid> <"desc"> [group] [aka] [(attrs)] ["origin"] . 18
            AREAEXCL <echoid mask> ........................................ 19
            AREAFILE <type> [path/file] [switches] ........................ 19
            AREAFILEGROUPS <yes/no> ....................................... 20
        ______________________________________________________________________
                                                                              
        Table of Contents                             GoldED Reference, Page i
                                                                              
            AREAFREQDIRECT <yes/no> ....................................... 20
            AREAFREQTO <echoid> ........................................... 20
            AREAINCL <echoid mask> ........................................ 20
            AREAISEMAIL <echoid> .......................................... 21
            AREAISNEWS <echoid> ........................................... 21
            AREAKEEPLAST <yes/no> ......................................... 21
            AREALISTECHOMAX <size> ........................................ 22
            AREALISTFORMAT <string> ....................................... 22
            AREALISTGROUPID <yes/no> ...................................... 23
            AREALISTNOS <yes/no> .......................................... 23
            AREALISTPAGEBAR <yes/no> ...................................... 23
            AREALISTSCAN <"L menu text"> [path]<filename> [-delete]] ...... 23
            AREALISTSORT <sortspec> ....................................... 24
            AREALISTTYPE <new/last> ....................................... 25
            AREAPATH <path> ............................................... 25
            AREAPMSCAN <echoid mask> ...................................... 25
            AREAPMSCANEXCL <echoid or wildcards> .......................... 26
            AREAPMSCANINCL <echoid or wildcards> .......................... 26
            AREAREADONLY <soft/hard> ...................................... 26
            AREARENAME <from echoid> <to echoid> .......................... 26
            AREAREPLYDIRECT <yes/no> ...................................... 26
            AREAREPLYTO <echoid> .......................................... 27
            AREASCAN <echoid mask> ........................................ 27
            AREASCANEXCL <echoid or wildcards> ............................ 28
            AREASCANINCL <echoid or wildcards> ............................ 28
            AREASCANSORT <sortspec> ....................................... 28
            AREASEP <echoid> <"desc"> <group> <type> ...................... 28
            AREASTART <echoid> ............................................ 29
            AREATYPEORDER <type1> <type2> <type3> <type4> <type5> ......... 29
            AREAYOUWROTETO <echoid> ....................................... 29
            ASKDELORIG <yes/no> ........................................... 30
            ATTACHPATH <path> ............................................. 30
            ATTRIBSATTACH <attributes> .................................... 30
            ATTRIBSCC <attributes> ........................................ 30
            ATTRIBSCFM <attributes> ....................................... 30
            ATTRIBSECHO <attributes> ...................................... 30
            ATTRIBSEMAIL <attributes> ..................................... 30
            ATTRIBSFRQ <attributes> ....................................... 30
            ATTRIBSLOCAL <attributes> ..................................... 31
            ATTRIBSNET <attributes> ....................................... 31
            ATTRIBSNEWS <attributes> ...................................... 31
            ATTRIBUTES <attributes> ....................................... 31
            BEEPCOMMENT <yes/no> .......................................... 31
            BEEPLOCALMSG <yes/no> ......................................... 31
            BEEPNOISES <yes/no> ........................................... 31
            BEEPYOURMAIL <yes/no/always> .................................. 31
            CARBONCOPYLIST <listspec> ..................................... 31
            COLOR <colorspec> ............................................. 32
            COLORSET <Normal/Intense/Mono> ................................ 32
            CONFIRMFILE <filename> ........................................ 32
            CONFIRMRESPONSE <yes/no/ask> .................................. 33
            COOKIEPATH <path> ............................................. 33
            CROSSPOSTLIST <listspec> ...................................... 33
            CTRLINFO <Tearline,Origin,yes/no> ............................. 33
            CTRLINFOECHO <Tearline,Origin,yes/no> ......................... 33
            CTRLINFOEMAIL <Tearline,Origin,yes/no> ........................ 34
        ______________________________________________________________________
                                                                              
        Table of Contents                            GoldED Reference, Page ii
                                                                              
            CTRLINFOLOCAL <Tearline,Origin,yes/no> ........................ 34
            CTRLINFONET <Tearline,Origin,yes/no> .......................... 34
            CTRLINFONEWS <Tearline,Origin,yes/no> ......................... 34
            DISPAREANO <yes/no/always> .................................... 34
            DISPATTACHSIZE <bytes/kbytes/no> .............................. 35
            DISPAUTONEXT <yes/no> ......................................... 35
            DISPHDRDATESET <pos> <len> .................................... 35
            DISPHDRNAMESET <pos> <len> .................................... 35
            DISPHDRNODESET <pos> <len> .................................... 35
            DISPLISTCURSOR <top/neartop/middle/nearbottom/bottom> ......... 35
            DISPLISTWRAP <yes/no> ......................................... 36
            DISPLOCALHIGH <yes/no> ........................................ 36
            DISPMARGIN <width> ............................................ 36
            DISPMSGSIZE <bytes/kbytes/lines/no> ........................... 36
            DISPPAGEBAR <yes/no> .......................................... 36
            DISPREALMSGNO <yes/no> ........................................ 36
            DISPSOFTCR <yes/no> ........................................... 37
            DISPSTATUSLINE <yes/no> ....................................... 37
            DISPTABSIZE <chars> ........................................... 37
            DOSPROMPT (yes/no) ............................................ 37
            DOSSWAP <yes/no,xms,ems,disk,hide,checknet,noprealloc> ........ 37
            EDITAUTOATTACH <yes/no> ....................................... 38
            EDITAUTOSAVE <seconds> ........................................ 38
            EDITCHANGEDATE <always/yes/no> ................................ 39
            EDITCHARPARA [']<char>['] ..................................... 39
            EDITCHARSPACE [']<char>['] .................................... 39
            EDITCOMMENT <"word"> <"comment"> .............................. 39
            EDITCOMPLETION <"abbreviation"> <"completion"> ................ 40
            EDITCRLFTERM <yes/no> ......................................... 40
            EDITFIELDCLEAR <yes/no> ....................................... 40
            EDITHARDLINE <string> ......................................... 40
            EDITHARDLINES <yes/no> ........................................ 40
            EDITHARDTERM <yes/no> ......................................... 40
            EDITHDRNAMESET <pos> <len> .................................... 41
            EDITHDRNODESET <pos> <len> .................................... 41
            EDITHEADERATTRS <yes/no> ...................................... 41
            EDITHEADERFIRST <new,changes,replies,forwards,yes/no> ......... 41
            EDITINTERNAL <yes/no> ......................................... 42
            EDITMENU <yes/no> ............................................. 42
            EDITMIXCASE <yes/no> .......................................... 42
            EDITMSGSIZE <bytes> ........................................... 42
            EDITOR <commandline> [@file] [@line] .......................... 42
            EDITORFILE <file> ............................................. 43
            EDITQUOTEMARGIN <margin> ...................................... 43
            EDITREPLYRE <yes/no/numeric> .................................. 43
            EDITSAVEMENU <yes/no> ......................................... 43
            EDITSAVEUTIL <utilno> <"L menu text"> ......................... 43
            EDITSOFTCRXLAT <char> ......................................... 44
            EDITSPELLCHECK <commandline> [@file] .......................... 44
            EDITUNDELETE <lines> .......................................... 44
            EMPTYTEARLINE <yes/no> ........................................ 44
            ENCODEEMAILHEADERS <yes/no> ................................... 45
            ENDGROUP ...................................................... 45
            EVENT <eventtype> <eventcommand [parameters]> ................. 45
            EXCLUDENODES <addressmask> .................................... 46
            EXTERNOPTIONS <-options> ...................................... 46
        ______________________________________________________________________
                                                                              
        Table of Contents                           GoldED Reference, Page iii
                                                                              
            EXTERNUTIL <utilno> [-options] <commandline> .................. 47
            EZYCOMMSGBASE <path> .......................................... 49
            EZYCOMUSERBASE <path> ......................................... 49
            EZYCOMUSERNO <userno> ......................................... 49
            FIDOHWMARKS <yes/no> .......................................... 50
            FIDOLASTREAD <file> ........................................... 50
            FIDOMSGTYPE <Opus/FTS1> ....................................... 50
            FIDONULLFIX <yes/no> .......................................... 50
            FIDOUSERLIST <file> ........................................... 50
            FIDOUSERNO <userno> ........................................... 51
            FILEALIAS <alias> <filename> .................................. 51
            FILELISTPAGEBAR <yes/no> ...................................... 51
            FORCETEMPLATE <yes/no> ........................................ 51
            FORMFEEDSEPARATOR <yes/no> .................................... 51
            FRQEXT <.ext> ................................................. 51
            FRQNODEMAP <to-node> <from-node> .............................. 52
            FRQOPTIONS <options> .......................................... 52
            FRQWAZOO <yes/no> ............................................. 53
            GEDHANDSHAKE <yes/no> ......................................... 53
            GERMANKEYBOARD <yes/no> ....................................... 53
            GOLDBASEPATH <path> ........................................... 53
            GOLDBASESYSPATH <path> ........................................ 53
            GOLDBASEUSERNO <userno> ....................................... 53
            GOLDPATH <path> ............................................... 53
            GROUP <groupname> ............................................. 53
            HAPPYBIRTHDAY <value> ......................................... 54
            HIGHLIGHTUNREAD <yes/no> ...................................... 54
            HUDSONPATH <path> ............................................. 54
            HUDSONSIZEWARN <size in bytes> ................................ 54
            HUDSONSYSPATH <path> .......................................... 54
            HUDSONUSERNO <userno> ......................................... 54
            IGNORECHARSET <yes/no> ........................................ 55
            IMPORTBEGIN <text> ............................................ 55
            IMPORTEND <text> .............................................. 55
            INBOUNDPATH <path> ............................................ 55
            INCLUDENODES <addressmask> .................................... 55
            INPUTFILE <filename> .......................................... 55
            INTENSECOLORS <yes/no> ........................................ 56
            INTERNETADDRESS <internet-address> ............................ 56
            INTERNETDOMAIN <domainname> ................................... 56
            INTERNETGATE [gatename<,>]<address> ........................... 56
            INTERNETLOOKUP <yes/no> ....................................... 57
            INTERNETMSGID <yes/no> ........................................ 57
            INTERNETREPLY <yes/no> ........................................ 58
            INTERNETRFCBODY <yes/no> ...................................... 58
            INTERNETSERVER <nntp/smpt> <server> ........................... 58
            INTERNETSERVER <pop3> <server> [<username>] [<password>] ...... 58
            INVALIDATE <type> <"findstring"> <"replacestring"> ............ 58
            JAMHARDDELETE <yes/no> ........................................ 59
            JAMPATH <path> ................................................ 59
            KEYBCLEAR <yes/no> ............................................ 60
            KEYBDEFAULTS <yes/no> ......................................... 60
            KEYBEXT <yes/no> .............................................. 60
            KEYBMODE <poll/block> ......................................... 60
            KEYBSTACK <keystring> ......................................... 60
            KLUDGE <kludge-definition> .................................... 61
        ______________________________________________________________________
                                                                              
        Table of Contents                            GoldED Reference, Page iv
                                                                              
            KLUDGECHRS <yes/no> ........................................... 61
            LOADLANGUAGE <file> ........................................... 62
            LOGFILE <file> ................................................ 62
            LOGFORMAT <fd,max,bink,qbbs,db> ............................... 62
            LOOKUPECHO <yes/no> ........................................... 62
            LOOKUPLOCAL <yes/no> .......................................... 62
            LOOKUPNET <yes/no> ............................................ 63
            LOOKUPUSERBASE <yes/no> ....................................... 63
            MAILINGLIST <echoid> <senderaddress> [contribution address] ... 63
            MAILTOSS <echoid> <contribution-address> <pattern> ............ 63
            MAPPATH <server filespec> <local filespec> .................... 63
            MEMBER <echoid> ............................................... 64
            MENUDROPMSG <yes/no> .......................................... 64
            MENUMARKED <marked/current/previous/default> .................. 64
            MOUSE <yes/no> ................................................ 64
            MSGLISTDATE <written/arrived/received/no> ..................... 64
            MSGLISTFAST <yes/no> .......................................... 65
            MSGLISTFIRST <yes/no> ......................................... 65
            MSGLISTHEADER <yes/no> ........................................ 65
            MSGLISTPAGEBAR <yes/no> ....................................... 66
            MSGLISTVIEWSUBJ <yes/no> ...................................... 66
            MSGLISTWIDESUBJ <yes/no> ...................................... 66
            NAMESFILE <file> .............................................. 66
            NICKNAME <your pseudo> ........................................ 66
            NODELIST <file> [zone/addr] ................................... 66
            NODELISTWARN <yes/no> ......................................... 67
            NODEPATH <path> ............................................... 67
            NODEPATHFD <path> ............................................. 67
            NODEPATHIM <path> ............................................. 67
            NODEPATHV7 <path> ............................................. 67
            NODEV7FLAGS <flag> <value> .................................... 68
            NODEV7MODEM <type> <value> .................................... 68
            ORGANIZATION <text> ........................................... 69
            ORIGIN <"string"> ............................................. 69
            OUTBOUNDPATH <path> ........................................... 69
            OUTPUTFILE <file> ............................................. 69
            OVERLAY <ems/ext/disk> ........................................ 69
            PCBOARDPATH <path> ............................................ 70
            PCBOARDUSERNO <userno> ........................................ 70
            PERSONALMAIL <startup,allnames> ............................... 70
            PLAY <filename.ext/beepnoise> ................................. 70
            PRINTDEVICE <devicename> ...................................... 70
            PRINTFORMFEED <yes/no> ........................................ 70
            PRINTINIT <printstring> ....................................... 71
            PRINTLENGTH <lines> ........................................... 71
            PRINTMARGIN <characters> ...................................... 71
            PRINTRESET <printstring> ...................................... 71
            QUOTEBLANK <yes/no> ........................................... 71
            QUOTEBUFFILE <filename> ....................................... 71
            QUOTEBUFMODE <ask/append/overwrite> ........................... 72
            QUOTECHARS ["]<chars>["] ...................................... 72
            QUOTECTRL <Tearline,Origin,yes/no> ............................ 72
            QUOTEMARGIN <chars> ........................................... 73
            QUOTESPACING <yes/no> ......................................... 73
            QUOTESTRING <quotespec> ....................................... 73
            QUOTEWRAPHARD <yes/no> ........................................ 73
        ______________________________________________________________________
                                                                              
        Table of Contents                             GoldED Reference, Page v
                                                                              
            QWKBADMSGS <echoid> ........................................... 73
            QWKCONFMAP <bbsid> ["]<confname>["] <echoid> .................. 73
            QWKEXPORTPATH <path> .......................................... 74
            QWKIMPORTPATH <path> .......................................... 74
            QWKOPTIONS <bbsid> <options> .................................. 74
            QWKREPLYLINKER <cmd> .......................................... 74
            QWKTOSSLOG <file> ............................................. 74
            RA2USERSBBS <yes/no> .......................................... 75
            RCVDISABLESCFM <yes/no> ....................................... 75
            REGISTERKEY ................................................... 75
            REGISTERNAME .................................................. 75
            REM ........................................................... 75
            REPLYLINK <chain/direct> ...................................... 76
            REPLYLINKLIST <fast/full> ..................................... 76
            ROBOTNAME <name> .............................................. 76
            SCREENBLANKER <seconds> [BLACK] ............................... 76
            SCREENMAXCOL <columns> ........................................ 77
            SCREENMAXROW <rows> ........................................... 77
            SCREENPALETTE <reg> <value>  OR  <reg> (red green blue) ....... 77
            SCREENSHADOWS <yes/no> ........................................ 78
            SCREENSIZE <mode> ............................................. 78
            SCREENUSEBIOS <yes/no> ........................................ 78
            SEARCHFOR ["]<string|string|..>["] ............................ 78
            SEMAPHORE <type> <file> ....................................... 79
            SERIALNO ...................................................... 80
            SHAREMODE <yes/no/mode#> ...................................... 80
            SOUNDPATH <path> .............................................. 80
            SOUPBADMSGS <echoid> .......................................... 81
            SOUPEMAIL <echoid> ............................................ 81
            SOUPEXPORTMARGIN <margin> ..................................... 81
            SOUPEXPORTPATH <path> ......................................... 81
            SOUPIMPORTPATH <path> ......................................... 81
            SOUPNEWSRCFILE <file> ......................................... 81
            SOUPREPLYLINKER <cmd> ......................................... 81
            SOUPREPLYTO <internet-address> ................................ 81
            SOUPTOSSLOG <file> ............................................ 82
            SQUISHDIRECT <yes/no> ......................................... 82
            SQUISHSCAN <api/quick> ........................................ 82
            SQUISHUSERNO <index> .......................................... 82
            SQUISHUSERPATH <path>[file] ................................... 82
            STATUSLINECLOCK <yes/no> ...................................... 83
            STATUSLINEHELP <yes/no/nologo> ................................ 83
            STYLECODES <yes/hide/no> ...................................... 83
            STYLECODEPUNCT <"charlist"> ................................... 84
            STYLECODESTOPS <"charlist"> ................................... 84
            SWAPPATH <path> ............................................... 84
            TAGLINE <string or filename> .................................. 84
            TAGLINECHAR <char> ............................................ 85
            TAGLINESUPPORT <yes/no> ....................................... 85
            TASKTITLE <string> ............................................ 85
            TEARLINE <string> ............................................. 85
            TEMPLATE <file> ["desc"] [match-address] ...................... 85
            TEMPLATEMATCH <yes/no> ........................................ 86
            TEMPLATEPATH <path> ........................................... 86
            TEMPPATH <path> ............................................... 86
            TIMEOUT <seconds> ............................................. 87
        ______________________________________________________________________
                                                                              
        Table of Contents                            GoldED Reference, Page vi
                                                                              
            TIMEOUTSAVEMSG <yes/no> ....................................... 87
            TITLESTATUS <yes/no> .......................................... 87
            TWITMODE <mode> ............................................... 87
            TWITNAME <name/address> ....................................... 87
            TWITSUBJ <"string"> ........................................... 87
            TWITTO <yes/no> ............................................... 88
            USECHARSET <yes/no> ........................................... 88
            USEFLAGS <yes/no> ............................................. 88
            USEFWD <yes/no/ask> ........................................... 88
            USEINTL <type> ................................................ 89
            USEMSGID <yes/no> ............................................. 89
            USEPID <yes/no> ............................................... 89
            USERLIST <file> [zone/addr] ................................... 89
            USERLISTFILE <file> ........................................... 89
            USERNAME <name>[[,]< >address] ................................ 89
            USETZUTC <yes/no> ............................................. 90
            UUDECODEPATH <path> ........................................... 90
            VIEWHIDDEN <yes/no> ........................................... 90
            VIEWKLUDGE <yes/no> ........................................... 91
            VIEWQUOTE <yes/no> ............................................ 91
            WHOTO <name> .................................................. 91
            WILDCATUSERNO <userno> ........................................ 91
            XLATCHARSET <importid> <exportid> <file> ...................... 91
            XLATESCSET <import> <export> <escfile> ........................ 92
            XLATEXPORT <charsetid> ........................................ 92
            XLATIMPORT <charsetid> ........................................ 92
            XLATLOCALSET <charsetid> ...................................... 92
            XLATPATH <path> ............................................... 92
            ZONEGATING <yes/no/ask> ....................................... 92

        7.  Obsolete Keywords ............................................. 94

        8.  Location Dependent Configuration Keywords ..................... 97

        9.  Message Attributes Reference .................................. 99

        10. Area Configuration ........................................... 100
            AdeptXBBS .................................................... 100
            AreasBBS ..................................................... 100
            Concord ...................................................... 101
            D'Bridge ..................................................... 101
            Dutchie ...................................................... 101
            Echolist ..................................................... 101
            Ezycom ....................................................... 102
            FastEcho ..................................................... 102
            Fidoconfig ................................................... 102
            FidoPCB ...................................................... 102
            FMail ........................................................ 102
            FrontDoor .................................................... 102
            GEcho ........................................................ 102
            IMAIL ........................................................ 103
            InterMail .................................................... 103
            LoraBBS ...................................................... 103
            Maximus ...................................................... 103
            ME2 .......................................................... 103
            Opus ......................................................... 103
        ______________________________________________________________________
                                                                              
        Table of Contents                           GoldED Reference, Page vii
                                                                              
            ParToss ...................................................... 103
            PCBoard ...................................................... 104
            Portal ....................................................... 104
            ProBoard ..................................................... 104
            QEcho ........................................................ 104
            QFront ....................................................... 104
            QuickBBS ..................................................... 104
            RaEcho ....................................................... 104
            RemoteAccess ................................................. 105
            Squish ....................................................... 105
            SuperBBS ..................................................... 105
            timEd ........................................................ 105
            Termail ...................................................... 105
            TosScan ...................................................... 105
            WaterGate .................................................... 106
            WMail ........................................................ 106
            XMail ........................................................ 106

        11. The Random System ............................................ 107
            Defining Groups .............................................. 107
            Defining Random Items ........................................ 107
            Random System Example ........................................ 109

        12. Color Configuration .......................................... 110
            COLOR <window> <part> <colors> ............................... 110
            Various general color items .................................. 110
            Startup screen / logo window ................................. 111
            Area Selection Menu .......................................... 111
            Message Header ............................................... 111
            Message Text ................................................. 111
            Miscellaneous Smaller Menus .................................. 112
            Miscellaneous Larger Menus (Browser Windows) ................. 112
            Help Screens ................................................. 112
            Pop Up Information Windows ................................... 112
            Stylecodes ................................................... 113

        13. The Message Template ......................................... 114
            Conditional tokens ........................................... 114
            Insert tokens ................................................ 114
            Replacement tokens ........................................... 115

        14. The Online Help System ....................................... 117

        15. Character Translation ........................................ 119
            FSC-0050  "Charset Identifier" ............................... 119
            FSC-0051  "I51" .............................................. 119
            FSC-0054  "CHARSET proposal" ................................. 119
            No FSC    "Composed Characters" .............................. 119
            The ESC translation tables ................................... 119
            The CHS translation tables ................................... 120

        16. Keyboard Command Reference ................................... 121
            Arealist commands ............................................ 121
            Internal editor commands ..................................... 121
            File selection commands ...................................... 123
            Message lister commands ...................................... 123
        ______________________________________________________________________
                                                                              
        Table of Contents                          GoldED Reference, Page viii
                                                                              
            Nodelist browser commands .................................... 123
            Message reader commands ...................................... 124
            Key undefine commands ........................................ 125

        17. Macros and Keystacking ....................................... 126

        18. Key Reference ................................................ 127

        19. Language Definition .......................................... 129
            Date/Time Substitution Codes ................................. 129

        20. Message Kludge Lines ......................................... 131
            ACUPDATE: .................................................... 131
            AREA:<echoname> .............................................. 131
            CC: <name> <address> ......................................... 131
            CHARSET:<charset identifier> ................................. 131
            CHRC:<font change id> ........................................ 131
            CHRS:<charset identifier> .................................... 131
            DESTADDR:<destaddress> ....................................... 131
            DOMAIN <destdomain> <destaddress> <origdomain> <origaddress> . 132
            EID:<crc16> <stamp> [replycrc16] <replystamp> ................ 132
            ENC: ......................................................... 132
            EOT: ......................................................... 132
            FLAGS <special attributes> ................................... 132
            FMPT <from point> ............................................ 132
            FWDAREA <original area> ...................................... 132
            FWDDEST <aka> ................................................ 132
            FWDFROM <name> ............................................... 132
            FWDMSGID <aka serial#> ....................................... 132
            FWDORIG <aka> ................................................ 133
            FWDSUBJ <original subject> ................................... 133
            FWDTO <name> ................................................. 133
            GATECHK:<???> ................................................ 133
            GIF:<filename> ............................................... 133
            GROUP:<echoname> ............................................. 133
            I51 (no parameters) .......................................... 133
            INTL <destaddress> <origaddress> ............................. 133
            MSGID: <origaddress> <serialno> .............................. 133
            MSGTO: <destaddress> ......................................... 133
            Original: <Carbon copy, original name> ....................... 134
            PATH: <list of nodes> ........................................ 134
            PTH: <list of nodes> ......................................... 134
            PID: <identifier> <version> [serialno] ....................... 134
            Realname: <Name> ............................................. 134
            RFD: <id> .................................................... 134
            REPLY: <replyaddress> <replyserialno> ........................ 134
            RID:<stuff> .................................................. 134
            ROUTE <list of nodes and points> ............................. 134
            SEEN-BY: <list of nodes> ..................................... 134
            SN:<serialno> ................................................ 135
            SOT: ......................................................... 135
            SPLIT: ....................................................... 135
            TCL1:, TCL2: <long hex string> ............................... 135
            TID: ......................................................... 135
            TOPT <to point> .............................................. 135
            TZ <offset from UTC> ......................................... 135
        ______________________________________________________________________
                                                                              
        Table of Contents                            GoldED Reference, Page ix
                                                                              
            TZUTC ........................................................ 135
            Via: <netmail tossing info> .................................. 135
            XID:<stuff> .................................................. 135





















































        ______________________________________________________________________
                                                                              
        Table of Contents                             GoldED Reference, Page x
                                                                              
        ______________________________________________________________________
                                                                              
                                 Commandline Reference                        
        ______________________________________________________________________
                                                                              
        
        Commandline syntax: GOLDED [options] [keystacking]
        
        
        Available options:
        
        -?
        
            Displays a help screen with all available commandline options.
        
        
        -C<configname>
        
            Specifies another configuration file than the default GOLDED.CFG.
        
        
        -D
        
            Disable old configuration keywords. For backward compatibility,
            GoldED still supports a number of old names for some configuration
            keywords. I recommend that you use -D sometimes and rename the
            keywords that are reported as unknown.
        
        
        -E<echoid>
        
            If specified, GoldED starts directly in the specified echo,
            bypassing the arealist screen. See the AREASTART configuration
            keyword for more info.
        
        
        -EXPORTSOUP
        
            Calls the SOUP packet export feature during the startup phase.
            This is the same as starting it from the areascan SOUP
            Packet->Export menu item. The SOUP export happens immediately
            after the regular startup area scanning (if that is enabled) and
            after SOUP import.
        
        
        -F
        
            Force recompile of most configuration files, but not all. Does not
            recompile the .CHS files.
        
        
        -FF
        
            Force complete recompile of all configuration files, regardless of
            whether they are up-to-date or not. This is equivalent to deleting
            all the *.GE? files.
        ______________________________________________________________________
                                                                              
        Commandline Reference                         GoldED Reference, Page 1
                                                                              
        
        
        -H  Same as option -?.
        
        
        -INSTALL[=path]
        
            Start the quick install procedure. You should give a path to your
            other mail software if it cannot be found using environment
            variables or in current directory.
        
            Please see the INSTALL.TXT document for information about the
            quick install procedure.
        
        
        -IMPORTSOUP
        
            Calls the SOUP packet import feature during the startup phase.
            This is the same as starting it from the areascan SOUP
            Packet->Import menu item. The SOUP import happens immediately
            after the regular startup area scanning (if that is enabled).
        
        
        -M
        
            Mute. Disables all sounds in GoldED.
        
        
        -N
        
            No share. If used, this prevents GoldED from using SHARE
            compatible file-open calls, which are used by default. Works only
            until the SHAREMODE keyword is used in GOLDED.CFG. This keyword is
            normally not useful, but may be used to debug your setup or
            something.
        
        
        -NOSCAN
        
            Disable the automatic startup area scanning (if that is enabled).
            This is useful for automated SOUP import/export in a batch file.
            For example "-noscan -importsoup @x y" imports SOUP then exits.
        
        
        -P
            Since it seems that increasing the thread priority for the Win32
            version is a mixed blessing, the default is now to NOT increase
            the priority. This option increases the priority (Win32 only).
        
        -Q
        
            Quiet. Turns off verbose config compile. On by default. This could
            be used on the commandline to disable a -V(erbose) option in the
            GEDCMD environment variable.
        
        
        ______________________________________________________________________
                                                                              
        Commandline Reference                         GoldED Reference, Page 2
                                                                              
        -S<sortspec>
        
            Sort all areas according to <sortspec>. See the AREALISTSORT
            config keyword for details.
        
        
        -T<seconds>
        
            Set the timeout value. A value of zero (0) means never timeout.
            See the TIMEOUT config keyword for details.
        
        
        -V
        
            Turns on verbose config compile. When used, GoldED will display
            the full filename of each main config file it compiles. It also
            displays the name of the detected multitasker, if any. This can be
            useful for debugging your setup, and see if GoldED accesses the
            files (especially the AREAFILE's) it is supposed to.
        
        
        -VV
        
            Same as -V, but also displays all the active lines while
            compiling. This could be used to find the exact spot if it crashes
            or stops while compiling.
        
        
        -W
        
            If used, GoldED will create (and overwrite if existing) the file
            GOLDAREA.INC, which will then contain all areas in the AREADEF
            form, sorted by your AREALISTSORT specification. This is very
            useful for converting your AREAFILE's to a form you can edit with
            your favorite text editor and use in GoldED. It is also useful if
            you have used the new AREADESC keyword or the AREAFILE EchoList
            reader. The GOLDAREA.INC file (created in the GOLDPATH) can be
            used by adding "INCLUDE GOLDAREA.INC" to your GOLDED.CFG or
            GOLDAREA.CFG. When creating the file, GoldED will use '.' if an
            aka is the same as the main aka, and leave out the optional origin
            if it's the same as the first ORIGIN in your GOLDED.CFG. This
            makes it easier to share the same GOLDAREA.INC between different
            setups.
        
        
        -X  Reserved for debugging purposes.
        
        
        -Y  Reserved for debugging purposes.
        
        
        -Z  Reserved for debugging purposes.
        
        
        Commandline keystacking
        
        ______________________________________________________________________
                                                                              
        Commandline Reference                         GoldED Reference, Page 3
                                                                              
        Any non-option characters on the commandline are stuffed into the
        keyboard buffer. See the chapter on keyboard definition and the
        KEYBSTACK keyword for more info.
        
        Example: GOLDED @S A
        
        Makes GoldED go to the area scanning menu <Alt-S>, and select
        scanning of <A> all areas.
        
        See the Macros and Keystacking chapter for more info.
        













































        ______________________________________________________________________
                                                                              
        Commandline Reference                         GoldED Reference, Page 4
                                                                              
        ______________________________________________________________________
                                                                              
                                 Environment Variables                        
        ______________________________________________________________________
                                                                              
        
        These are the GoldED specific environment variables:
        
        
        GOLDED
        
            Path to the GOLDED.CFG file. It is recommended to set this
            variable, but don't forget to change it if you move your GoldED
            setup to a different directory!
        
        
        GEDCMD
        
            Specifies additional commandline options. Use this if you want to
            specify options, but need to run GoldED without them (for example
            when renaming GOLDED.EXE to DBEDIT.EXE in older versions of
            D'Bridge). You can override the environment options with
            commandline options.
        
        
        GOLDNODE
        
            The path where GoldNODE can find a GOLDED.CFG to use.
        
        
        When the using AREAFILE feature to read external area configuration
        from other programs, the individual AREAFILE's may use specific
        environment variables to find the files. Please read the Area
        Configuration chapter for specific details of each supported AREAFILE.
        





















        ______________________________________________________________________
                                                                              
        Environment Variables                         GoldED Reference, Page 5
                                                                              
        ______________________________________________________________________
                                                                              
                                 Batchfile Errorlevels                        
        ______________________________________________________________________
                                                                              
        
        For operation in batch files, GoldED has a set of errorlevel values:
        
          032 or higher   Error exit (check the logfile for details).
          004             Echomail entered.
          002             Netmail entered.
          001             Local mail entered.
          000             No errors. No mail entered.
        
        Add values together to find the combined error levels. For example,
        error level 6 is returned if netmail and echomail (2+4) was entered.
        
        Example RUNGOLD.BAT or RUNGOLD.CMD file:
        
        === Cut ===
        @echo off
        golded.exe
        rem ged386.exe
        rem ged2.exe
        if errorlevel 008 goto error
        if errorlevel 007 goto e_n_l
        if errorlevel 006 goto e_n__
        if errorlevel 005 goto e___l
        if errorlevel 004 goto e____
        if errorlevel 003 goto __n_l
        if errorlevel 002 goto __n__
        if errorlevel 001 goto ____l
        goto nomail
        :error
          echo golded error exit!
          goto end
        :e_n_l
          echo **** New echo, net and local mail entered.
          goto end
        :e_n__
          echo **** New echo and netmail entered.
          goto end
        :e___l
          echo **** New echo and local mail entered.
          goto end
        :e____
          echo **** New echomail entered.
          goto end
        :__n_l
          echo **** New net and local mail entered.
          goto end
        :__n__
          echo **** New netmail entered.
          goto end
        :____l
          echo **** New local mail entered.
        ______________________________________________________________________
                                                                              
        Batchfile Errorlevels                         GoldED Reference, Page 6
                                                                              
          goto end
        :nomail
          echo **** No new mail entered.
        :end
          echo.
          echo Thank you for using GoldED! :-)
        === Cut ===
        
















































        ______________________________________________________________________
                                                                              
        Batchfile Errorlevels                         GoldED Reference, Page 7
                                                                              
        ______________________________________________________________________
                                                                              
                             Nodelist and Userlist Support                    
        ______________________________________________________________________
                                                                              
        
        GoldED supports the FrontDoor, Version 7(+) nodelist indexes as well
        as a plain FIDOUSER.LST. However, if you run software that doesn't use
        any of these formats, you may want to use GoldED's own nodelist index.
        This chapter describes how to do that.
        
        In order to enable nodelist/userlist lookup and browsing, GoldED needs
        to use a set of special nodelist index files, created by the GoldNODE
        nodelist compiler.
        
        GoldED normally uses and displays information from the nodelist when
        browsing, but it doesn't really need the nodelist for anything. The
        index files contains sufficient information for lookup and browsing of
        names or addresses. This means that you can delete or pack away the
        nodelists and/or userlists after compiling with GoldNODE, if you want
        to save space and you don't need them for anything else.
        
        GoldNODE commandline syntax:
        
          GOLDNODE/GN386/GN2 [-options] [configfile]
        
        Available options:
        
          -C            Conditional compile.
          -D            Remove duplicate nodes from index.
          -F            Forced compile.
          -Q            Quite compiled. No screen output improves speed.
          -S<size>      Set the max size of names. Normally not used.
          -U<file>      Create sorted FIDOUSER.LST userlist file.
        
        The following options are only interpreted by DOS real mode version:
        
          -M<nodes>     Compile max <nodes> nodes (maximum is 65500).
          -ND           Enable DISK usage. 
          -NE           Disable EMS usage. 
          -NX           Disable XMS usage. 
        
        The [configfile] is the path AND filename of the GOLDED.CFG
        configuration file to read. If no filename is given, the path
        specified with the GOLDNODE or GOLDED environment variables are used.
        
        The nodelist index files are named GOLDNODE.GX? are are placed in the
        path pointed to by the NODEPATH keyword.
        
        The V7+ is automatically used if your NODEPATHV7 is set correctly. If
        GoldED shows "xxxx / NODEX.DTP" at the bottom of the browser window,
        the displayed information is taken from the raw nodelist entry, taken
        from the V7+ index.
        
        GoldNODE can handle up to 45 nodelists and 10 userlists. GoldNODE can
        read the german POINTS24-format directly!
        ______________________________________________________________________
                                                                              
        Nodelist and Userlist Support                 GoldED Reference, Page 8
                                                                              
        
        NOTE: If you use the EXCLUDENODES and INCLUDENODES keywords, please
        note that the <addressmask> does NOT accept "ALL" or "WORLD" etc. You
        must use wildcard '*' instead.
        



















































        ______________________________________________________________________
                                                                              
        Nodelist and Userlist Support                 GoldED Reference, Page 9
                                                                              
        ______________________________________________________________________
                                                                              
                                 Configuration Control                        
        ______________________________________________________________________
                                                                              
        
        The GOLDED.CFG configuration reader can be directed in several ways
        with special keywords:
        
        
        IF <condition>
        ELIF <condition>
        ELSEIF <condition>    (same as ELIF)
        ELSE
        ENDIF
        
            These control keywords can be used to setup sections of
            configuration which enable different sets of keywords depending on
            which version that is used.
        
            The following conditions can be used:
        
              dos              true, if GoldED/DOS or GoldED/386 is used
              386              true, if GoldED/386 is used
              os2              true, if GoldED/2 is used
              w32              true, if GoldED/W32 is used
              linux, unix      true, if GoldED/Lnx is used
              firebird         true, if GoldED 3.xx is used
              asa              true, if GoldED-asa is used
        
              yes, true, on    always true
        
            Example:
        
              IF OS2
                EDITOR c:\qedit\os2\q.exe @file -n@line
                EDITSPELLCHECK c:\os2\cmd.exe /c c:\ss\ss.exe @file
              ELIF DOS
                EDITOR c:\qedit\dos\q.exe @file -n@line
                EDITSPELLCHECK c:\ss\ss.exe @file
              ENDIF
        
            If both IF 386 and IF DOS are used, it is important to put DOS as
            the bottom choice.
        
        
        IGNORE
        
            This tells the configuration file reader to ignore all subsequent
            lines until another IGNORE keyword is encountered. Useful for
            testing and quickly switching portions of configuration.
        
            However it is probably more useful to use the IF/ELIF/ENDIF
            control keywords.
        
        
        ______________________________________________________________________
                                                                              
        Configuration Control                        GoldED Reference, Page 10
                                                                              
        INCLUDE <file>
        
            This tells the configuration file reader to stop reading the
            current .CFG file, and start reading the <file> as an extra
            configuration file, then resume reading the previous .CFG. The
            INCLUDE filenames are stored and their timestamps are checked when
            GoldED is started. INCLUDE files can be nested without limit.
        
        
        REM
        
            Signifies a REMark (comment) line. The line is ignored.
        
        
        Any non-alphabetic non-whitespace character at the beginning of a line
        makes the line a comment. Example:
        
            ; This is a comment
            % This is a comment
            * This is a comment
            // This is a comment
            /* This is a comment */
        
        By tradition, the semicolon is the standard comment character. The
        semicolon (and only that) can also be used to add a comment at the end
        of a configuration line. Example:
        
            ADDRESS 2:236/77      ; Main address.
            AKA     2:236/77.1    ; SysOp point.
        


























        ______________________________________________________________________
                                                                              
        Configuration Control                        GoldED Reference, Page 11
                                                                              
        ______________________________________________________________________
                                                                              
                            Configuration Keyword Reference                   
        ______________________________________________________________________
                                                                              
        
        This is an alphabetical list of all the configuration keywords that
        can be used in the main GoldED configuration file (GOLDED.CFG and any
        file included from it). It also lists and documents the keywords that
        are specific to the Random System groups.
        
        The following special symbols are used in the keyword parameter lists:
        
            ()        Default value.
            []        Optional parameter.
            <>        Required parameter, not optional.
            ""        Parameter must be inclosed in quotes ("").
            /         Separates mutually exclusive values.
            ,         Separates possible values for the keyword.
        
        
        Here is the complete keyword list:
        
        
        ADDRESS <zone:net/node[.point][@domain][, pointnet]>
        
            Your network address, FidoNet-style. More than one address can be
            specified if you are member of more than one network. The keywords
            ADDRESS and AKA can be used interchangeably.
        
            If a pointnet is specified with a point address, GoldED will use
            the so-called "3D" addressing method in netmail msgs, otherwise
            the "4D" method is used. The 3D method works by putting the
            address ZONE:POINTNET/POINT.0 in the msg header, instead of the 4D
            format ZONE:NET/NODE.POINT. Most modern mailers and mail
            processors now supports the 4D format, but if you are a point, you
            should always consult your Boss about which format to use.
        
            The optional @domain part can be used to specify a "fifth"
            dimension to the 4D address. It is normally not necessary to
            specify a domain. Domains are never shown in the header and are
            not put in the origin line. The only place the domain is
            used/added by GoldED is in the MSGID kludge.
        
            Examples:
        
              Address 2:236/77              ; Node address
              Address 2:236/77.1            ; Point address (4D)
              Address 2:236/77.1, 16077     ; Point address (3D)
              Address 2:236/77@fidonet      ; Node address with domain
        
            This keyword can be used globally and in a Random System group.
        
        
        ADDRESSBOOKADD <yes/no/always>  (yes)
        
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 12
                                                                              
            Setting this keyword to "always" means that GoldED will always add
            unknown addressees to the addressbook when writing new or quoted
            mails automatically. If you set the value to "yes", GoldED will
            add them only if it's a netmail/email. ADDRESSBOOKADD NO disables
            this feature entirely.
        
            NOTE that GoldED won't add unknown users if their name match one
            of the following criteria:
        
              1) it's a USERNAME
              2) it's a ROBOTNAME
              3) it's the WHOTO
              4) address/aka is unknown
        
        
        ADDRESSLOOKUPFIRST <MsgID/Origin>  (Origin)
        
            By default address of sender taken from Origin line. If this
            keyword set to MsgID then GoldEd looks for correct FTN address in
            MSGID kludge first.
        
        
        ADDRESSMACRO <macro>,<name>,<address>[,"subject"][,attribs]
        
            Defines a short name for often used addresses. Typical uses are
            for AreaFix/AreaMgr, your uplink, boss, points or others you write
            to often. To use a defined address macro, you just type it in the
            To: name field.
        
            If (and ONLY if) the subject is enclosed in quotes ("" or ''),
            GoldED will look for message attributes after the subject. See the
            Message Attributes Reference for a valid attribute. You cannot
            have quotes within quotes (not the same type anyway).
        
            The attribues are *added* to the ones already there, they do *not*
            replace them.
        
            Examples:
        
              afup,AreaFix,2:236/512,"password -q -l",K/S
              ffup,FileFix,2:236/512,password
              odin,Odinn Sorensen,2:236/77,GoldED - What else? :-)
        
            A special format is supported for UUCP or INTERNET gateways. The
            special format is indicated with a (@) as the first character in
            the <name>.
        
              jfu,@fallesen@diku.dk,2:310/33
              dn,@INTERNET/david@csource.oz.au,2:241/999
        
            In the first example, GoldED will put "UUCP" (the default gateway
            name) in the TO: msg header field and "To: fallesen@diku.dk" on
            the first line of the message text.
        
            In the second example, GoldED will put "INTERNET" in the TO:
            field, and "To: david@csource.oz.au" in the message. The forward
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 13
                                                                              
            slash (/) separates the gateway name from the receiver address.
            Any gateway name may be used.
        
            The address macros can also be specified in an external file, like
            the NAMES.FD file supported by the FrontDoor mailer/editor and
            Maximus BBS. See the keyword NAMESFILE for details. However, you
            should not use the syntax with the attributes in the NAMES.FD
            file, because FrontDoor and Maximus do not know this syntax.
        
        
        ADEPTXBBSPATH <path>
        
            The path where you keep your AdeptXBBS.
        
        
        ADEPTXBBSUSERNO <userno>
        
            By default GoldED will use the first record in the userfile and
            lastreads. If you are not the first user in the userfile, or are
            sharing the messagebase with other GoldED users, you must either
            set this keyword to -1, or use a different number for each user.
            Each user must be defined in the userbase.
        
        
        AKA <zone:net/node[.point][@domain][, pointnet]>
        
            AKA (Also Known As) is an alias for the ADDRESS keyword.
        
            This keyword can be used globally and in a Random System group.
        
        
        AKAMATCH <match> <aka>
        
            This is an enhancement of the existing aka matching logic, which
            in some circumstances fails to find the correct aka.
        
            Example: Lets say that zone 21, 22 and 23 are part of the same
            network, and that you have an aka in zone 22. You would put
            something like this in your setup:
        
              ADDRESS 2:236/77
              AKA     22:33/44
        
            In this case, if a mail comes in from zone 23, the normal aka
            matching logic would fail, because it does not try to guess the
            correct zone. To the rescue comes the new keyword. Now you can add
            this to your setup:
        
              AKAMATCH 21:*/*.* 22:33/44
              AKAMATCH 23:*/*.* 22:33/44
        
            It tells GoldED that any mail from zone 21 or 23 matches your zone
            22 aka. Note the use of wildcards here. Wildcards are not strictly
            necessary, you could also have just written "23:" or "23:*".
        
            When an address does not match any AKAMATCH definition, the normal
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 14
                                                                              
            aka matching logic takes over.
        
        
        AKAMATCHECHO <yes/no>  (no)
        
            If enabled, GoldED will attempt to match one of your akas to the
            address of the person you are replying to in echomail areas.
        
            Normally it is not desirable to enable aka matching in echomail,
            because some echoes may be restricted to members of one particular
            network, and an accidental wrong aka matching may attract unwanted
            attention from the moderator or the compulsive flamers :-)
        
        
        AKAMATCHING <yes/no>
        
            This keyword is only valid in Random System groups. When used, it
            overrides any global AKAMATCHNET, AKAMATCHECHO or AKAMATCHLOCAL
            you may have.
        
        
        AKAMATCHLOCAL <yes/no>  (no)
        
            If enabled, GoldED will attempt to match one of your akas to the
            address of the person you are replying to in local areas.
        
            It doesn't really make sense to do aka matching in local areas.
            The keyword is just there for completeness.
        
        
        AKAMATCHNET <yes/no>  (yes)
        
            If enabled, GoldED will attempt to match one of your akas to the
            address of the person you are replying to in netmail areas. This
            is especially useful if you are a member in more than one network,
            and therefore have more than one address.
        
        
        APP <programname> [keyword and/or parameters]
        
            This is a way for other programs to place configuration data in
            GoldED's configuration file.
        
            For example, if a program named "OtherProg" wants to read its
            configuration from GOLDED.CFG, here is how it might look:
        
              APP OtherProg REGKEY xyaxajlsaduoiweqeq
              APP OtherProg IRQ 5
        
            GoldED itself will ignore APP lines just like REM lines.
        
        
        AREA <echoid> <"desc"> <msgbase>[type] <loc> [akano] [attrs]
        
            This keyword defines a mail area in GoldED. You need to define at
            least one mail area to run GoldED, or use the AREAFILE keyword to
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 15
                                                                              
            read the area setup of your mailer, mail processor or BBS.
        
            <echoid>    Mail area identifier.
            <"desc">    Area description in ("") quotes.
            <msgbase>   O(Opus *.MSG), S(FTS-0001 *.MSG), Q(QuickBBS),
                        R(RemoteAccess), H(Hudson), M(Squish), J(JAM),
                        E(Ezycom), G(Goldbase), P(PCBoard).
            [type]      N(Netmail), E(Echomail), L(Local).
            <location>  Directory path/file or Hudson board number.
            [aka]       AKA number (starting from 0)
            [attrs]     R/O(Read-Only), and/or other attributes.
        
            "O(Opus)" are *.MSG files with binary date/time stamps.
            "S(FTS-0001)" are *.MSG files, but with zone/point header fields.
            "Q(QuickBBS)", "R(RemoteAccess)" and "H(Hudson) are synonyms.
            "M(Squish)" is the Squish format.
            "E(Ezycom)" is the Ezycom format.
            "J(JAM) is the JAM format.
            "G(Goldbase)" is the Goldbase format.
            "P(PCBoard)" is the PCBoard format.
            "X(AdeptXBBS)" is the AdeptXBBS format.
            "W(WildCat!)" is the WildCat! 4.x format.
        
            GoldED can handle enviroment variables correctly in paths
            specified in connection with this keyword. For example, if a path
            is defined as %MAIL%\path\name, and SET MAIL=C:\POINT is in
            AUTOEXEC.BAT (or whatever), then GoldED translates the path to
            C:\POINT\path\name.
            NOTE: The translation is done at config compile time, so if you
            change the environment variable and haven't changed anything else
            that would cause GoldED to recompile it's config, you must force
            it with the -F or -FF command parameter.
        
            It is recommended to use the newer AREADEF keyword, which allows
            more detailed mail area setup.
        
        
        AREAAUTOID <verbose/long/short>  (verbose)
        
            Defines how an automatically created echoid should look, when
            AREAFILE finds an area without an echoid.
        
            When the "verbose" option is used, the echoid is given a name
            similar to the function of the area, such as NETMAIL, NET_SENT,
            ECHO_BAD, ECHO_DUPES and so on.
        
            When the "long" option is used, the echoids are numbered
            sequentially like this: NETMAILxxx, ECHOMAILxxx and LOCALxxx. This
            is how it worked in older versions (including 2.42.gamma).
        
            When the "short" option is used, the echoids are numbered
            sequentially like this: NETxxx, ECHOxxx and LOCALxxx. This is how
            it worked in 2.50.beta until B1016.
        
        
        AREAAUTONEXT <yes/no>  (yes)
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 16
                                                                              
        
            If enabled, GoldED will automatically jump to the first marked
            area in the arealist on startup, and the next marked area after
            exiting from an area you have been reading.
        
        
        AREACATCHUPREAD <yes/no>  (yes)
        
            If enabled, GoldED will set all skipped messages to "read" when
            using AREAcatchup in the arealist-screen. This implies that
            HIGHLIGHTUNREAD YES is used, otherwise it has no function.
        
        
        AREACOPYADDID <yes/no>  (no)
        
            If enabled, GoldED will insert the control line
            "AREA:<originalechoid>" at the top of each message that is copied
            or moved. This can be a help when regularly copying messages to a
            "THE_SAFE" type area.
        
            This keyword can and should only be used in Random System Groups.
        
            It is useful if you copy echomails to some local "ARCHIVE" areas.
            In this case, GoldED can add the "AREA:<originalechoid>"-kludge to
            inform you from where you copied the mail to.
        
        
        AREACOPYDIRECT <yes/no>  (no)
        
            If enabled, the destination area selection list is bypassed,
            thereby making possible a "seamless" copy/move to the default
            destination area. The destination area should be set with
            AREACOPYTO.
        
            This keyword can be used globally and in a Random System group.
        
            NOTE: It is probably not a good idea to enable this keyword
            globally.
        
        
        AREACOPYTO <echoid>
        
            Sets the default area for the Copy/Move functions. Typically you
            could set it to a "safe/permanent storage" type of area, for
            example a JOKES2KEEP or THE_SAFE area. Note that the Forward
            function uses the AREAREPLYTO area instead.
        
            This keyword can be used globally and in a Random System group.
        
            Related keywords: AREAFREQTO, AREAREPLYTO.
        
        
        AREADEF <setup>
        
            This is newer version of the "AREA" keyword, with more detailed
            parameters.
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 17
                                                                              
        
            The full syntax is: (must be all on one line)
        
            AREADEF <echoid> <"desc"> <group> <type> <msgbase> <path/board>
                    <aka> <(attrs)> ["origin"]
        
            <echoid>      The echoid.
            <"desc">      Area description in quotes.
            <group>       Groupid uppercase letter (A-Z) or 0 if not in a
                          group. Use #groupnumber to specify group numbers in
                          the 1-999 range. Example: #117.
            <type>        Net, Echo, Local, EMail or News.
            <msgbase>     Opus, FTS1, Hudson, Squish, Ezycom, JAM, Goldbase or
                          PCBoard.
            <path/board>  Area path, boardnumber or base filename.
            <aka>         Aka address for the area, or '.' for main aka.
            <(attrs)>     Default attributes in brackets ().
            ["origin"]    Optional default origin in quotes.
        
            This looks a lot like the AREA keyword. Additional parameters are
            the <group>, the verbose <type> and <msgbase>, the fully specified
            <aka> address, the brackets for the attributes and the optional
            origin.
        
            Note the possibility of using '.' to specify the main aka. This,
            and the optional default origin, makes it simpler to create a
            common INCLUDE'able area configuration for several setups with
            different addresses, for example two people sharing the same
            msgbase.
        
            GoldED can handle enviroment variables correctly in paths
            specified in connection with this keyword. For example, if a path
            is defined as %MAIL%\path\name, and SET MAIL=C:\POINT is in
            AUTOEXEC.BAT (or whatever), then GoldED translates the path to
            C:\POINT\path\name.
            NOTE: The translation is done at config compile time, so if you
            change the environment variable and haven't changed anything else
            that would cause GoldED to recompile it's config, you must force
            it with the -F or -FF command parameter.
        
        
        AREADESC <echoid> <"desc"> [group] [aka] [(attrs)] ["origin"]
        
            Adds a description and optionally a group letter, aka, attributes
            and origin to an _existing_ (previously defined) area. This is
            useful if you use an AREAFILE that does not contain descriptions,
            groups, akas, attributes or origins.
        
            <echoid>    The echoid.
            <"desc">    Area description in quotes.
            [group]     Optional groupid letter (A-Z) or 0 if not in a group,
                        or #groupnumber (1-999) or '-' to keep the existing
                        groupid.
            [aka]       Optional aka address for the area, or '.' for main
                        aka, or '-' to keep the existing aka.
            [(attrs)]   Optional default attributes in brackets (), '-' to
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 18
                                                                              
                        keep the existing attributes. Note that if they are
                        specified, they are _added_ to the default
                        net/echo/local attributes.
            ["origin"]  Optional default origin in quotes.
        
            NOTE: You cannot skip any of the optional parts in the middle,
            even if you only want to set, say, an origin. Use '-' to keep the
            existing value for the parts you skip.
        
        
        AREAEXCL <echoid mask>
        
            With this keyword, you can define the echoids of areas which
            should be ignored by GoldED (thereby leaving them out of the
            arealist). This is normally used in connection with AREAFILE, to
            exclude areas you are not interested in reading. DOS/4DOS-style
            wildcards (* and ?) can be used in the echoid mask.
        
            Examples:
        
              AREAEXCL *        Excludes all areas.
              AREAEXCL *INTER*  Excludes all areas containing "INTER" anywhere
                                in the echoid.
              AREAEXCL INT*.*   Excludes all areas beginning with "INT" and
                                containing a '.' anywhere in the echoid.
        
            You can use the AREAINCL keyword to re-include areas which have
            been excluded with AREAEXCL.
        
            NOTE: This keyword must be placed before any AREA, AREADEF or
            AREAFILE keyword.
        
        
        AREAFILE <type> [path/file] [switches]
        
            GoldED can read the area setup of many popular mailers, mail
            processors and BBS'es, thereby making it much easier and simpler
            to configure GoldED for the mail areas you receive, by eliminating
            the need to write AREA lines for all or most of your areas.
        
            <type>        Name of the program.
            [path/file]   Filename or path to the area setup files.
            [switches]    Msgbase specific switches.
        
            For most programs, GoldED can automatically find the path or
            filename using environment variables. By default, GoldED will look
            for the area setup files in the AREAPATH.
        
            There are switches for sorting the areas, and for turning off an
            update-check when GoldED starts up.
        
            GoldED can handle enviroment variables correctly in paths
            specified in connection with this keyword. For example, if a path
            is defined as %MAIL%\path\name, and SET MAIL=C:\POINT is in
            AUTOEXEC.BAT (or whatever), then GoldED translates the path to
            C:\POINT\path\name.
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 19
                                                                              
            NOTE: The translation is done at config compile time, so if you
            change the environment variable and haven't changed anything else
            that would cause GoldED to recompile it's config, you must force
            it with the -F or -FF command parameter.
        
            This keyword is explained in greater detail in the Area
            Configuration chapter.
        
        
        AREAFILEGROUPS <yes/no>  (yes)
        
            In some AREAFILE setups, you can groups the areas using single
            letters (A-Z) or numbers (#1-999). If this keyword is enabled,
            GoldED will use the area groupid instead of the area echoid when
            gathering area specific information from the Random System.
        
            If this keyword is enabled, you should setup matching GROUP's in
            GOLDRAND.CFG. See the Random System chapter for details.
        
        
        AREAFREQDIRECT <yes/no>  (no)
        
            If enabled, the destination area selection list is bypassed,
            thereby making possible a "seamless" file request in the default
            destination area. The destination area should be set with
            AREAFREQTO.
        
            TIP:  If you (like most) only have one mailer netmail area, you
                  should enable the AREAFREQDIRECT keyword globally for
                  simpler file requests.
        
            This keyword can be used globally and in a Random System group.
        
            NOTE: It is probably not a good idea to enable this keyword
            globally.
        
        
        AREAFREQTO <echoid>  (first netmail area)
        
            Sets the default area for the filerequest function. You should set
            this to the netmail area where you normally put the filerequest
            messages.
        
            Note that if AREAFREQTO is not specified, it defaults to the first
            netmail area found.
        
            This keyword can be used globally and in a Random System group.
        
            Related keywords: AREACOPYTO, AREAREPLYTO.
        
        
        AREAINCL <echoid mask>
        
            With this keyword, you can define the echoids of areas which
            should be re-included by GoldED, if they have been excluded with
            the AREAEXCL keyword. DOS/4DOS-style wildcards (* and ?) can be
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 20
                                                                              
            used in the echoid mask.
        
            Examples:
        
              AREAINCL *        Includes all areas.
              AREAINCL *INTER*  Includes all areas containing "INTER" anywhere
                                in the echoid.
              AREAINCL INT*.*   Includes all areas beginning with "INT" and
                                containing a '.' anywhere in the echoid.
        
            You can use the AREAINCL keyword to re-include areas which have
            been excluded with AREAEXCL.
        
            NOTE: This keyword must be placed before any AREA, AREADEF or
            AREAFILE keyword.
        
        
        AREAISEMAIL <echoid>
        
            For Internet e-mail areas. See AREAISNEWS for details.
        
        
        AREAISNEWS <echoid>
        
            Wildcards * and ? are allowed. These keywords are designed to mark
            areas which are read from an AREAFILE as Internet e-mail or
            newsgroups. This may be necessary in some cases to enable the
            Internet specific features without having to manually define all
            Internet areas. Examples:
        
              AREAISNEWS alt.*, rec.*, sci.*
        
        
        AREAKEEPLAST <yes/no>  (yes)
        
            If enabled, GoldED will write the file GOLDLAST.LST in the
            GOLDPATH at exit and read it back when run next time. The contents
            of the file is a list of lastread information for each area as it
            was at last scan.
        
            This feature is helpful when you know that there have not been
            tossed new mail and don't want to wait for a full msgbase scan.
            Now you can just hit ESC at the startup screen to abort the area
            scan and GoldED will put up the lastread info from the previous
            session.
        
            It also makes the "new mail since last scan" feature even better,
            because the new mail marker now shows which areas that have new
            mail since last session even when scanning areas at startup.
        
            In addition, GoldED now makes extra backups of the file, so that
            earlier versions of the files can be found in GOLDLAST.BK1 and
            GOLDLAST.BK2.
        
            GoldED now only writes the GOLDLAST.LST file at exit if it
            survived the initial startup scan.
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 21
                                                                              
        
        
        AREALISTECHOMAX <size>  (0)
        
            Allows you to specify a fixed or dynamically sized width of the
            EchoID column in the arealist.
        
            If a negative value is specified, the width will be the that of
            the widest echoid in the arealist plus the negative value. This
            might be useful if some long-name echoes have uninteresting ends,
            such as "VERYLONGECHOID_R23.PUB" (could benefit from a <size> of
            -7). There is currently no provision for long echoids with common
            beginning.
        
            The arealist can dynamically resize the EchoID and Description
            columns, so that long echoids are not cut off. The sizing of the
            EchoID column is done against the Description column, which
            thereby looses or gains width. In version 2.41 and earlier, the
            EchoID column width was fixed at 13 chars on 80 column displays.
        
        
        AREALISTFORMAT <string> ("AM D CPUN E G ")
        
            The arealist column layout is configurable. This keyword allows you
            to change the layout to whatever you like
        
            The default is:
        
              AREALISTFORMAT "AM D CPUN E G "
        
            This produces the usual layout. Here is another:
        
              AREALISTFORMAT "ME D CPUN G "
        
            This one puts the echoid in front and eliminates the area numbers.
        
            The letters stand for the following:
        
              letter  meaning                                 default width
              A       Area number                             4
              M       Marked                                  1
              D       Description                             Dynamic
              C       Number of messages                      6
              P       Personal mail mark ('+')                1
              U       Number of unread/new messages           6
              N       Changed since last scan mark ('*')      1
              E       Echoid                                  AREALISTECHOMAX
              G       Groupid                                 Dynamic: 0, 1 or 3
        
            You can also specify widths if you don't like the defaults:
        
              AREALISTFORMAT "AM D C4PU4N E G "
        
            In this example, the Msgs and New columns are put back to the size
            they had in "old days".
        
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 22
                                                                              
            If you leave out a letter, that column will not be shown.
        
            Use only the defined letters. Use spaces to specify required space
            between columns. Use only positive numbers for widths. Failure to
            obey these rules may cause undocumented behaviour.
        
        
        AREALISTGROUPID <yes/no>  (yes)
        
            If enabled, the arealist screen will display the groupid letters,
            if any, in a column to the right of the EchoID column. If a
            groupid is not a letter in the range A-Z (a value in the range
            #65-#90), the groupid is not shown.
        
        
        AREALISTNOS <yes/no>  (no)
        
            If enabled, GoldED will display the board numbers of Hudson areas
            in the arealist instead of the default sequential numbers.
        
        
        AREALISTPAGEBAR <yes/no>  (yes)
        
            Enables or disables a pagebar (scrollbar) in the arealist.
        
        
        AREALISTSCAN <"L menu text"> [path]<filename> [-delete]]
        
            This keyword allows you to define additional menu items for the
            arealist scanning menus (Alt-S or Alt-P).
        
            The first two characters of the menu text are the "hotkey" letter
            that will be highlighted in the menu text, plus a space.
        
            The filename specifies a plain text file, with the echoids
            (wildcards allowed) of the areas you want to scan when the menu
            item is selected. There can be several echoids on each line in the
            file. If no path is given, the file is loaded from the GOLDPATH.
        
            The -delete option will cause GoldED to delete the list file after
            scanning the areas in it. For example, if your mail processor
            generates a list of the areas that it tossed new mail to, you
            could add the list as a menu item on the scanning menu and use it
            to scan only those areas with new mail. Note that some mail
            processors automatically delete their list after using it for
            replylinking. You may want to do some creative stuff with
            batchfiles to grab a copy.
        
            Examples:
        
              AREALISTSCAN "g Scan Newsgroups" NEWSGRPS.LST
              AREALISTSCAN "L Scan Latest" R:\GECHO\IMPORT.ALL -delete
        
              === Cut, NEWSGRPS.LST ===
              ALT.*, COMP.*, MISC.*, NEWS.*
              REC.*, SOC.*, SCI.*, TALK.*
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 23
                                                                              
              === Cut ===
        
              === Cut from an import batchfile ===
              gecho mgr toss pack -tossbad
              if exist import.jam type import.jam >>import.all
              if exist import.hmb type import.hmb >>import.all
              if exist import.sdm type import.sdm >>import.all
              mbutil link -clean
              === Cut ===
        
        
        AREALISTSORT <sortspec>  (FYTUE)
        
            This keyword defines how the area list should be sorted. You can
            override the default setting from the commandline with the -S
            switch.
        
            The <sortspec> can be composed of the following types:
        
              A   Sort by aka.
              B   Sort by board number.
              D   Sort by description.
              E   Sort by echoid.
              F   Sorts all "fuzzy search" matches first.
              G   Sort by group (if any).
              M   Sorts all marked areas first.
              O   Sort by original order.
              P   Sort by personal mail.
              T   Sort by type (in the order net, echo, local).
              U   Sort by unread messages (try it!).
              X   Sort by msgbase type.
              Y   Sorts all areas with "new" mail first.
              Z   Sort by msgbase path.
              -   Descending sort (largest first).
              +   Ascending sort (smallest first) (default).
        
            In practice 'M' and 'Y' will usually give the same result, because
            GoldED automatically marks scanned areas if they contain new mail.
        
            Example:
        
              AREALISTSORT T-U+E
        
            This sorts ascending by Type, descending by Unread (that is, areas
            with the most unread messages comes first) and ascending by Echoid
            (in case two areas have the same number of unread msgs).
        
            By default no sorting is done, and all areas are listed in the
            order they were found (unless sorting was specified with an
            AREAFILE keyword). However, the configuration examples all make
            use of the Unread sorting type. This is a very useful way of
            sorting areas, because it keeps all the areas with mail together.
        
            Personally I now sort my areas like this: "AREALISTSORT FYTUE".
            This puts all areas with new mail first, then sorts these into
            type (net/echo/local), then into number of new msgs and finally
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 24
                                                                              
            into echoid. The 'F' at the start enables fuzzy match sorting,
            which is very handy when looking for an echoid containing a
            particular word. Let's say I want a list of all GOLDED echoes. I
            can now simply type "GOLDED" and then the arealist automatically
            sorts itself so that all echoes with an echoid containing "GOLDED"
            comes first :-)
        
            The 'X' sort type sorts areas according to msgbase type, in the
            following order:
        
             Hudson
             Goldbase
             JAM
             Squish
             OPUS *.MSG
             FTS-1 *.MSG
             Ezycom
             PCBoard
        
            The 'X' and 'Z' sort types were implemented for internal use, to
            optimize area scanning speed. When scanning areas, GoldED starts
            by sorting the arealist using the sortspec defined with the
            AREASCANSORT keyword.
        
        
        AREALISTTYPE <new/last>  (new)
        
            Defines the contents of the 4th column (the one after the "Total"
            column).
        
              New   Displays the amount of new (unread) msgs.
              Last  Displays the number of the last msg read.
        
        
        AREAPATH <path>
        
            If you use the AREAFILE keyword, GoldED might need to know where
            the area setup files are located. This keyword specifies where
            they are found, if not current directory.
        
            NOTE: Most AREAFILE types can find the path using the environment
            variable(s) specific for the program(s). Such environment
            variables (or a path specified with the AREAFILE definition)
            always overrides the AREAPATH.
        
        
        AREAPMSCAN <echoid mask>
        
            This keyword defines areas which will be automatically scanned for
            personal mail when starting GoldED. DOS/4DOS-style wildcards (*
            and ?) can be used in the echoid mask.
        
            Examples:
        
              AREAPMSCAN *        Scan all areas.
              AREAPMSCAN *INTER*  Scan all areas containing "INTER" anywhere
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 25
                                                                              
                                  in the echoid.
              AREAPMSCAN INT*.*   Scan all areas beginning with "INT" and
                                  containing a '.' anywhere in the echoid.
        
            It is recommended to have an "AREAPMSCAN *" to scan all areas at
            startup. If you don't want to wait for the scan to complete, you
            can abort the scan by pressing ESC during startup.
        
        
        AREAPMSCANEXCL <echoid or wildcards>
        
            With this keyword you can prevent areas from being scanned with
            AREAPMSCAN on startup. This is good if you use "AREAPMSCAN *", but
            have some big areas which slows it down.
        
        
        AREAPMSCANINCL <echoid or wildcards>
        
            Here you can specify areas to be scanned with AREAPMSCAN even if
            they were excluded with AREAPMSCANEXCL. Useful for partial
            reversal of wildcard specs in the excludes.
        
        
        AREAREADONLY <soft/hard>  (soft)
        
            If this keyword is set to "hard", it is no longer possible to
            enter/reply/change messages in areas marked read-only with the R/O
            area attribute. The "soft" setting uses a menu to ask permission
            as in the previous versions. This option is designed for those who
            setup a system for new computer users who might be confused enough
            to enter a message in a read-only area despite the warning menu.
        
        
        AREARENAME <from echoid> <to echoid>
        
            Renames one echoid to another. The feature is meant to be used in
            connection with AREAFILE, where some types do not store echoids
            with the areas (and GoldED then automatically gives them unique
            echoids).
        
            Examples:
        
              AREARENAME NET001 NETMAIL
              AREARENAME ECHO001 BAD_MSGS
              AREARENAME LOCAL001 BBS.USERS
        
        
        AREAREPLYDIRECT <yes/no>  (no)
        
            If enabled, the destination area selection list is bypassed,
            thereby making possible a "seamless" reply/forward to the default
            destination area. The destination area should be set with
            AREAREPLYTO.
        
            TIP:  If you run a utility or have a mail processor which copies
                  personal mail to a separate area and puts an "AREA:" line at
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 26
                                                                              
                  the top of the messages, you should create a random system
                  group for the area and enable AREAREPLYDIRECT in it:
        
                    Group ECHO_PERSONAL
                      AreaReplyDirect yes
        
                  With such a setup, GoldED replies directly to the area found
                  in the "AREA:" line, so that you do not have to explicitly
                  use the Alt-N command to reply in the original area, because
                  GoldED automatically stores the reply in the appropiate
                  area. However, if you use <ALT-N>, you can select a diffrent
                  area (i.e. Netmail).
        
            This keyword can be used globally and in a Random System group.
        
            NOTE: It is probably not a good idea to enable this keyword
            globally.
        
        
        AREAREPLYTO <echoid>  (first netmail area)
        
            Sets the default area for the READmovequotemsg, READmovecommentmsg
            and Forward functions. The default area is the first netmail area
            found in your setup. You should check if GoldED found the correct
            one if you have more than one. If you find yourself often
            forwarding or quoting from one area to another, it might be a good
            idea to setup a Random System group and put in this keyword.
            Example:
        
              Group GOLDED
                AreaReplyto GOLDED.BETA
              EndGroup
        
            This keyword can be used globally and in a Random System group.
        
            Related keywords: AREACOPYTO, AREAFREQTO.
        
        
        AREASCAN <echoid mask>
        
            This keyword defines areas which will be automatically scanned
            when starting GoldED. DOS/4DOS-style wildcards (* and ?) can be
            used in the echoid mask.
        
            Examples:
        
              AREASCAN *        Scan all areas.
              AREASCAN *INTER*  Scan all areas containing "INTER" anywhere in
                                the echoid.
              AREASCAN INT*.*   Scan all areas beginning with "INT" and
                                containing a '.' anywhere in the echoid.
        
            It is recommended to have an "AREASCAN *" to scan all areas at
            startup. If you don't want to wait for the scan to complete, you
            can abort the scan by pressing ESC during startup.
        
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 27
                                                                              
        
        AREASCANEXCL <echoid or wildcards>
        
            With this keyword you can prevent areas from being scanned with
            AREASCAN on startup. This is good if you use "AREASCAN *", but
            have some big areas which slows it down.
        
        
        AREASCANINCL <echoid or wildcards>
        
            Here you can specify areas to be scanned with AREASCAN even if
            they were excluded with AREASCANEXCL. Useful for partial reversal
            of wildcard specs in the excludes.
        
        
        AREASCANSORT <sortspec>  (XZBE)
        
            When scanning areas, GoldED can optimize area scanning speed if it
            first sorts the arealist in an order so that each msgbase format
            is scanned in sequence rather than on semi-random order.
        
            If you don't like this or don't need it, you can define your own
            sort order.
        
            See the AREALISTSORT keyword for the definition of the sortspecs.
        
        
        AREASEP <echoid> <"desc"> <group> <type>
        
            You can define area separation lines between groups or areatypes.
            The syntax is nearly the same as the AREADEF keyword except for
            the fields after <type>.
        
            Examples:
        
              These five are area separation lines that are designed to list
              before each type of area. This works well when AREALISTSORT has
              T (for type) as one of the primary sort orders.
        
                AREASEP !NET   "Netmail areas"   0 Net
                AREASEP !EMAIL "E-mail areas"    0 EMail
                AREASEP !ECHO  "Echomail areas"  0 Echo
                AREASEP !NEWS  "Newsgroup areas" 0 News
                AREASEP !LOCAL "Local areas"     0 Local
        
              These can be used to separate areas with group letters (it will
              also work with group numbers like #117). Areas should then be
              sorted primarily on the group.
        
                AREASEP !A "Group A" A Local
                AREASEP !B "Group B" B Local
                AREASEP !C "Group C" C Local
        
              In these examples, I put a '!' in front of the echoid to make
              sure it is sorted ahead of the areas. This may not be necessary
              in all cases, depending on the sort order in effect. If you do
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 28
                                                                              
              put '!' in front of the echoid, have fuzzy sorting as the
              primary sort order, and type '!' in the fuzzy search, you'll get
              the interesting effect that all area separation lines collect
              themselves at the top :-)
        
        
            The area separation lines are implemented like a special kind of
            area, and are therefore sorted in the arealist just as if they
            were actual areas. This is also the reason why you can place the
            cursor bar on the separation lines. Originally I wanted to make
            the cursor skip the separation lines, but I think I'll leave it as
            it is, because it can be useful sometimes, especially when using
            the fuzzy feature to quickly go to an area, for example, type "!C"
            to quickly move down to the group C areas (using the group sorted
            example).
        
            When configuring area separation lines, be careful to consider the
            AREALISTSORT, so that the lines are sorted into the positions you
            want. If you don't sort areas, you must make sure that the AREASEP
            definitions are placed correctly in your GOLDED.CFG or
            GOLDAREA.CFG, that is, between/before AREADEF lines.
        
            You will note that the separation lines are not fully connected
            into the left and right edges. This is both by design and for
            practical reasons (easier to implement), not a bug.
        
            Currently the descriptions are hardcoded to the natural location
            in the description column.
        
        
        AREASTART <echoid>
        
            Normally GoldED starts by displaying the arealist, to let you
            select which area you want to read. If this keyword is defined,
            the arealist is bypassed and GoldED starts directly in the
            configured area. You can override AREASTART with the -E
            commandline switch.
        
        
        AREATYPEORDER <type1> <type2> <type3> <type4> <type5>
        
            This keyword allows you to change the ordering of the Net, Echo,
            Local, EMail and News types when sorted by AREALISTSORT.
        
            The default is
        
              AREATYPEORDER Net EMail Echo News Local
        
            This keyword was added to give greater flexibility to the new
            AREASEP feature.
        
        
        AREAYOUWROTETO <echoid>
        
            GoldED automatically copies mails written by yourself to the given
            area when saving a new mail. GoldED will also add an AREA-kludge
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 29
                                                                              
            so you can see from which area the mail originally is copied from.
        
            This keyword can be used globally and in Random System group.
        
        
        ASKDELORIG <yes/no>  (yes)
        
            If enabled, you will be asked if the message you just replied to
            should be deleted. Otherwise it is left untouched.
        
            This keyword is only functional in netmail and local areas.
        
        
        ATTACHPATH <path>
        
            Defines the default <path> when selecting files for attachement.
        
        
        ATTRIBSATTACH <attributes>
        
            Defines the attributes that are *added* to the existing attributes
            of a message when the file attach attribute is toggled on.
        
        
        ATTRIBSCC <attributes>
        
            Defines the default attributes of Carbon Copy messages. CC
            attributes are *added* to the existing attributes of the original
            message. Usually used to add the Kill/Sent attribute.
        
        
        ATTRIBSCFM <attributes>
        
            Defines the default attributes of the Confirmation Receipt
            message.
        
        
        ATTRIBSECHO <attributes>
        
            Defines the default attributes of messages entered in echomail
            areas.
        
        
        ATTRIBSEMAIL <attributes>
        
            Defines the default attributes of messages entered in e-mail
            areas.
        
        
        ATTRIBSFRQ <attributes>
        
            Defines the attributes to use for messages generated with the file
            request function. Suggested attributes are: PVT K/S CRA. The FRQ
            and LOC attributes are added automatically.
        
        
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 30
                                                                              
        ATTRIBSLOCAL <attributes>
        
            Defines the default attributes of messages entered in local areas.
        
        
        ATTRIBSNET <attributes>
        
            Defines the default attributes of messages entered in netmail
            areas.
        
        
        ATTRIBSNEWS <attributes>
        
            Defines the default attributes of messages entered in news groups.
        
        
        ATTRIBUTES <attributes>
        
            Defines the default attributes for area members of the current
            Random System group.
        
        
        BEEPCOMMENT <yes/no>  (yes)
        
            If enabled, GoldED will make a noise when the cursor in the
            internal editor is moved across a word defined with the
            EDITCOMMENT keyword.
        
        
        BEEPLOCALMSG <yes/no>  (no)
        
            If enabled, GoldED will make a noise if it finds a msg with the
            "Local" (LOC) attributes set. This can be useful for the sysop who
            wants to monitor the msgs entered by users on his/her BBS.
        
            A related keyword is DISPLOCALHIGH.
        
        
        BEEPNOISES <yes/no>  (yes)
        
            If enabled, GoldED makes noises when it wants attention.
        
            NOTE: This is the "master switch" for all noises in GoldED.
        
        
        BEEPYOURMAIL <yes/no/always>  (yes)
        
            If set to "yes", GoldED will make a noise if it finds a
            non-received message to one of your USERNAME's. If set to
            "always", GoldED will make the noise even if it has already been
            marked as received.
        
        
        CARBONCOPYLIST <listspec>  (Names)
        
            This specifies the format of the Carbon Copy list, as it will look
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 31
                                                                              
            after processing. You can also change the format in the CC menu
            before processing.
        
            The <listspec> can be one of the following:
        
              Keep      Keep the list as entered.
              Names     Convert list to "CC: Name, Name, Name.." format.
              Visible   Convert list to "CC: Name Address" format.
              Hidden    Convert list to "^aCC: Name Address" format.
              Remove    Remove the list completely.
        
            More details can be found in the Carbon Copy and Crossposting chapter.
        
        
        COLOR <colorspec>
        
            Using this keyword you can define or redefine all the colors used
            in GoldED. See the Color Configuration chapter for details.
        
            A complete color setup consists of a quite a lot of COLOR
            keywords, and it is normal practice to put them in a separate .CFG
            file and use the INCLUDE keyword to let GoldED read it. The COLORS
            archive contains a number of example color/mono setups. Try them
            out if you think the default colors stink :-)
        
        
        COLORSET <Normal/Intense/Mono>  (Normal or Mono)
        
            Three color setups are built-in, and can be selected with this
            keyword.
        
            The Normal set is the default when a color display adapter is
            detected. The Normal set has all black background, with bright
            neon-like colors for the window frames. Some hate it, some love
            it. :-)
        
            The Intense set switches off the "blink" attribute, thereby
            enabling the use of intense (bright) colors for the background
            ("paper") colors as well as the foreground ("ink") colors. This is
            used in the Intense set to make a bright white background, sort of
            like the standard Windows 3.0 setup.
        
            The Mono set is the default when a monochrome adapter is detected.
        
        
        CONFIRMFILE <filename>  (GOLDED.CFM)
        
            GoldED supports the Confirmation Receipt attribute, as used in
            FrontDoor 2.xx with the FLAGS CFM kludge. If GoldED finds an
            unreceived message to one of your USERNAME's with the CFM (or the
            RRQ Return Receipt Request) attribute set, it generates an
            automatic response message from the content of the CONFIRMFILE. In
            the file you can use many of the template tokens to personalize
            the automatic message. You can specify the default attributes for
            the message with the ATTRIBSCFM keyword.
        
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 32
                                                                              
            Template tokens are explained in the Message Template chapter.
        
        
        CONFIRMRESPONSE <yes/no/ask>  (ask)
        
            An unreceived message to you with the CFM attribute set tells
            GoldED that the sender has requested a receipt that you have read
            the message. With this keyword you tell GoldED what to do when
            such a message is found. Either always automatically generate the
            receipt ("yes"), always ignore the requests ("no") or ask you in
            each case. Older versions always generated receipts.
        
        
        COOKIEPATH <path>  (defaults to the GOLDPATH)
        
            Defines the default path for the @random template token.
        
        
        CROSSPOSTLIST <listspec>  (Verbose)
        
            This specifies the format of the Crosspost list, as it will look
            after processing.
        
            The <listspec> can be one of the following:
        
              None      Crosspost without a list in the msgs.
              Verbose   Change the list to lines of "* Crossposted in ..."
              Yes       Also adds "* Crossposted in ...", but expands echolist
                        in line rather than in column.
              Raw       Keep the crosspost list as you entered it.
        
            More details can be found in the Carbon Copy and Crossposting
            chapter.
        
        
        CTRLINFO <Tearline,Origin,yes/no>
        
            Specifies if you want a tearline and/or origin in your messages.
        
            This keyword can ONLY be used in random system groups.
        
            This may be helpful for QWK users, who can now create a group for
            the QWK areas and put "CTRLINFO No" in it.
        
        
        CTRLINFOECHO <Tearline,Origin,yes/no>  (Tearline Origin)
        
            Specifies if you want a tearline and/or origin in your echomail
            messages. They will be added by your echomail processor if you
            disable them here.
        
            Examples:
        
              CTRLINFOECHO Tearline Origin  ; Add both tearline and origin.
              CTRLINFOECHO Tearline         ; Add only a tearline.
              CTRLINFOECHO Origin           ; Add only an origin.
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 33
                                                                              
        
            NOTE: If you use the last example, your mail processor may get
            confused. However, most modern mail processors *can* handle msgs
            without a tearline.
        
        
        CTRLINFOEMAIL <Tearline,Origin,yes/no>  (No)
        
            Specifies if you want a tearline and/or origin in your Internet
            e-mail messages. This is not recommended.
        
        
        CTRLINFOLOCAL <Tearline,Origin,yes/no>  (No)
        
            Specifies if you want tearline and origin in your messages in
            local areas. In local areas, the tearline and origin is normally
            never required but can be used for cosmetic purposes.
        
            Examples:
        
              CTRLINFOLOCAL Tearline Origin  ; Add both tearline and origin.
              CTRLINFOLOCAL Tearline         ; Add only a tearline.
              CTRLINFOLOCAL Origin           ; Add only an origin.
        
        
        CTRLINFONET <Tearline,Origin,yes/no>  (Tearline)
        
            Specifies if you want tearline and origin in your netmail
            messages. In netmail areas, the tearline and origin is normally
            never required but can be used for cosmetic purposes.
        
            Examples:
        
              CTRLINFONET Tearline Origin  ; Add both tearline and origin.
              CTRLINFONET Tearline         ; Add only a tearline.
              CTRLINFONET Origin           ; Add only an origin.
        
        
        CTRLINFONEWS <Tearline,Origin,yes/no>  (No)
        
            Specifies if you want a tearline and/or origin in your Internet
            news articles. This is not recommended.
        
        
        DISPAREANO <yes/no/always>  (yes)
        
            This keyword specifies if GoldED should display the area number on
            the top line in the reader.
        
              Yes     Display it only if non-zero.
              No      Never display it.
              Always  Always display the area number.
        
            The area number is the same as that displayed in the leftmost
            column in the arealist. This also means that the number displayed
            can be either the "real" area number (Hudson/Goldbase/Ezycom
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 34
                                                                              
            board) or the standard sequential number (toggleable with Alt-B in
            the arealist).
        
            The number is displayed in square brackets to the left of the area
            description. I am not sure that is the best place for it - things
            are getting kinda crowded up there... Suggestions are welcome.
        
        
        DISPATTACHSIZE <bytes/kbytes/no>  (kbytes)
        
            Controls how the size of attached files is displayed in the
            header. Either the exact byte size, the rounded kbyte size, or not
            displayed at all. If the kbytes setting is chosen, the value is
            rounded according to the following formula: kbytes = (bytes + 512)
            / 1024. So a 600 bytes file is rounded up to "1k", but a 500 bytes
            file is rounded down to "0k".
        
        
        DISPAUTONEXT <yes/no>  (yes)
        
            If enabled, GoldED will automatically jump to the next message
            when entering an area.
        
        
        DISPHDRDATESET <pos> <len>  (-20 20)
        
            Specifies the position and length of the date field in the header
            display. If a negative value is specified, that value is added to
            the current display width.
        
        
        DISPHDRNAMESET <pos> <len>  (8 36)
        
            Specifies the position and length of the from/to name field in the
            header display. If a negative value is specified, that value is
            added to the current display width.
        
        
        DISPHDRNODESET <pos> <len>  (44 16)
        
            Specfies the position and length of the from/to node address field
            in the header display. If a negative value is specified, that
            value is added to the current display width.
        
            NOTE: The attributes display moves along with the DISPHDRNODESET
            values.
        
        
        DISPLISTCURSOR <top/neartop/middle/nearbottom/bottom>  (middle)
        
            Selects the starting position of selection bar in the message list
            and nodelist browsers.
        
            Top             At the top if possible.
            NearTop         At top + 1/3 if possible.
            Middle          At middle of possible.
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 35
                                                                              
            NearBottom      At bottom - 1/3.
            Bottom          At bottom.
        
        
        DISPLISTWRAP <yes/no>  (no)
        
            Enables/disables wrap-around when the selection bar in the main
            list/browser windows reaches the top or bottom.
        
        
        DISPLOCALHIGH <yes/no>  (yes)
        
            If enabled, GoldED will display the FROM name with the highlight
            color, if a message has the Local (LOC) attribute set.
        
            A related keyword is BEEPLOCALMSG.
        
        
        DISPMARGIN <width>  (0)
        
            This is the right margin (display width) used for message display.
            If the value is 0 (zero), GoldED will default to the current
            screen width. If a negative value is specified, that value will be
            added to the current screen width (thereby decreasing the display
            width relative to the screen width).
        
            If the DISPPAGEBAR keyword is enabled, the right margin is
            automatically decreased by one char.
        
        
        DISPMSGSIZE <bytes/kbytes/lines/no>  (bytes)
        
            When enabled, this keyword displays the msgbody size in bytes,
            kbytes or lines in the lower left side of the header. The size
            displayed is for the message body text only, the header and
            nul-terminator (and anything that may lurk beyond it) is excluded
            from the calculation.
        
            NOTE: This feature currently only works when _reading_ msgs. While
            editing a msg in the internal editor, this feature is disabled -
            however, the size will be displayed when you are in the Save msg
            menu (if EDITSAVEMENU is enabled).
        
        
        DISPPAGEBAR <yes/no>  (yes)
        
            If enabled, a "pagebar" (similar to the scrollbar in GUI's) will
            appear on the right margin, telling you about the relative size
            and position in the message you are reading. It is only displayed
            if a message is longer than a screenful.
        
            The pagebar automatically decreases the DISPMARGIN by one char.
        
        
        DISPREALMSGNO <yes/no>  (no)
        
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 36
                                                                              
            GoldED can display the message numbers in two ways:
        
            1.   As the actual (real) msg numbers.
            2.   As "relative" numbers, which are always sequential from msg
                 number 1.
        
            Normally the relative numbers are best, because they reflect the
            actual number of msgs in the system.
        
        
        DISPSOFTCR <yes/no>  (no)
        
            If enabled, GoldED will treat the so-called Soft-CR character
            (ASCII 141, HEX 8D) just like any other displayable character,
            instead of ignoring it like linefeed chars (LF). Note that by
            enabling this feature, you _disable_ the character translation
            feature that uses the Soft-CR as an escape character. This feature
            was added to help users in countries which use the Soft-CR
            character for other purposes like 2-byte characters in Japan.
        
            NOTE: The Ezycom msgbase format requires the Soft-CR to terminate
            each line. Therefore this feature is unlikely to be useful to
            Ezycom sysops.
        
        
        DISPSTATUSLINE <yes/no>  (yes)
        
            If set to NO, the statusline with memory meter, clock etc. will be
            disabled. This option has been implemented as a temporary help for
            visually impaired users. More extensive help may be implemented in
            future versions.
        
        
        DISPTABSIZE <chars>  (4)
        
            The tab size (number of spaces) used when displaying the tab
            (ASCII 9) character, and when pressing <Tab> in the internal
            editor.
        
            If you use an external editor, you should switch it to create
            spaces instead of tabs, because tabs are technically not allowed
            in FidoNet technology messages.
        
        
        DOSPROMPT (yes/no)  (yes)
        
            If enabled, GoldED will add a message about itself to the DOS
            prompt when shelling out.
        
        
        DOSSWAP <yes/no,xms,ems,disk,hide,checknet,noprealloc>  (yes)
        
            With this keyword you can specify what storage devices the DOS
            shell swapper should try or use, and what order to try them in.
        
            It is only relevant for the standard 16-bit DOS version. The 386,
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 37
                                                                              
            W32, OS/2 and Linux versions will ignore this keyword.
        
            The YES parameter tells the swapper to try EMS, XMS, DISK in that
            order, and NO tells it not to swap at all (this will leave the
            main part of GoldED in memory, and give you little room in the DOS
            shell).
        
            You can specify your own order, such as "DOSSWAP EMS, XMS, DISK",
            which makes it try it in that order, or "DOSSWAP EMS, DISK", which
            makes it ignore XMS.
        
            If disk swapping is used, the swap file will be placed in the
            SWAPPATH.
        
            These parameters modify the disk swapping behaviour:
        
              HIDE        Hides the swapfile, if diskswapping is used.
              CHECKNET    For some reason, disk swapping is slower if running
                          on a (Novell) network without this.
              NOPREALLOC  Use this if you are always running on a network
                          (instead of enabling CHECKNET).
        
            IMPORTANT IMPORTANT IMPORTANT IMPORTANT IMPORTANT
        
            Some programs use extended memory in ways that may conflict with
            the XMS extended memory driver, causing inexplicable crashes. If
            you have problems, you should first try turning off the OVERLAY
            keyword, and if it still fails, turn off DOSSWAP (or stop using
            those other programs :-)
        
        
        EDITAUTOATTACH <yes/no>  (yes)
        
            If enabled, and you use drivespec (C:, D:, etc.) in the subject in
            a netmail message, GoldED will automatically turn on the file
            attach attribute. Autoattaching only works if the subject has been
            edited, so that subject files will not automatically be
            re-attached in replies.
        
        
        EDITAUTOSAVE <seconds>  (30)
        
            If a non-zero value is given, the internal editor will
            automatically execute the EDITsavefile function with intervals of
            <seconds>. Good for keeping automatic backup of the message you
            are writing. The saved file can be restored with the EDITloadfile
            command. The name of the saved file is defined with the EDITORFILE
            keyword.
        
            If disaster strikes (crash, lockup, power blackout, etc.) while
            you are writing a message in the internal editor, this feature
            lets you continue from the last autosaved message, which will
            popup automatically when you enter the internal editor again.
        
            NOTE: This feature only works 100% if KEYBMODE is set to "poll".
            If KEYBMODE is set to "block", autosave won't happen until you
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 38
                                                                              
            press a key after the interval has passed.
        
        
        EDITCHANGEDATE <always/yes/no>  (yes)
        
            If set to "always", GoldED will always "touch" the message date in
            the header, if you change a message after saving it.
        
            If set to "yes", GoldED will only "touch" the message date in the
            header, if you change a message written by yourself. This is
            useful in cases such as when you need to edit messages written by
            other people (in-transit netmails for example) which may be
            mis-addressed or something without messing up the date.
        
            If set to "no", the message date is not changed when changing a
            message.
        
        
        EDITCHARPARA [']<char>[']  (' ')
        
            This keyword defines the character GoldED displays at the end of
            paragraphs in the internal editor. This is where the CR character
            will be placed once the msg is saved.
        
        
        EDITCHARSPACE [']<char>[']  (' ')
        
            This keyword defines the character GoldED displays when it should
            display a space character in the internal editor. See also the
            description of the EDITCHARPARA keyword.
        
            The keywords EDITCHARPARA and EDITCHARSPACE were added to aid me
            while rewriting and debugging the new internal editor. By
            redefining them to visible characters instead of spaces, I could
            see if strange things were happening while inserting or deleting
            characters. This was a great help. Personally I now always use
            redefinitions to ASCII 20 (a paragraph sign) and CP437 250 (a
            small dot).
        
        
        EDITCOMMENT <"word"> <"comment">
        
            This feature is mostly for fun :-)
        
            It allows you to define words which causes GoldED to display a
            comment in the statusline, when you place the cursor on the word
            in the internal editor.
        
            Example:
        
              EDITCOMMENT ":-("     "Don't worry, be happy!"
              EDITCOMMENT ":-)"     "Are we having fun yet?"
              EDITCOMMENT ";-)"     "Wink wink, nudge nugde..."
              EDITCOMMENT "!!!"     "Flame Warning!"
              EDITCOMMENT "GoldED"  "Great program, isn't it?"
              EDITCOMMENT "Odin"    "One more 'n' please."
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 39
                                                                              
              EDITCOMMENT "Odinn"   "That's right :-)"
        
            Have fun with it!
        
        
        EDITCOMPLETION <"abbreviation"> <"completion">
        
            This feature allows you to define abbreviations which will be
            automatically expanded to full words or sentences when typed in
            the internal editor. Examples:
        
              EDITCOMPLETION "/Odin" "Odinn"
              EDITCOMPLETION "/GED"  "GoldED"
              EDITCOMPLETION "/V7"   "Version 7"
              EDITCOMPLETION "/FD"   "FrontDoor"
              EDITCOMPLETION "/WfW"  "Windows for Workgroups"
        
            NOTE!  The abbreviation is case-sensitive. If "XX" is defined as
            an abbreviation, completion will NOT be triggered if "xx" is
            typed.
        
        
        EDITCRLFTERM <yes/no>  (no)
        
            If enabled, all text paragraphs in your messages will be
            terminated with a CR/LF combination. If disabled, only a single CR
            is used. This option was created to fix a problem with an older
            version of the Dutchie mail processor, that apparently needed the
            CR/LF termination of kludge lines.
        
        
        EDITFIELDCLEAR <yes/no>  (yes)
        
            If enabled, the input-fields will be automatically cleared for new
            entry, if a non-edit key is the first key pressed.
        
        
        EDITHARDLINE <string>  ("<<")
        
            The string is needed if you use an external editor that terminates
            all lines with a CR or CR/LF. The hardline string acts as a text
            paragraph terminator, and the normal CR's are ignored.
        
            The concept of "hardlines" is explained in the Hardline Feature
            chapter.
        
        
        EDITHARDLINES <yes/no>  (yes)
        
            This keyword enables the "hardline" feature. If disabled, the
            EDITHARDLINE string is never written to the editor message file,
            and the editor message file is read back exactly as entered,
            including terminating CR's on all lines.
        
        
        EDITHARDTERM <yes/no>  (no)
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 40
                                                                              
        
            If enabled, GoldED will hard-terminate all lines in your messages
            at the editor margin. It is recommended to enable this keyword for
            Internet e-mail and newsgroups, because some user-unfriendly
            Internet software does not wrap long lines properly. But DON'T
            enable it in normal FidoNet echomail.
        
            This keyword can be used globally and in Random System groups.
        
        
        EDITHDRNAMESET <pos> <len>  (8 36)
        
            Specfies the position and length of the from/to name field in the
            header edit display. If a negative value is specified, that value
            is added to the current display width.
        
        
        EDITHDRNODESET <pos> <len>  (44 36)
        
            Specfies the position and length of the from/to node address field
            in the header edit display. If a negative value is specified, that
            value is added to the current display width.
        
        
        EDITHEADERATTRS <yes/no>  (yes)
        
            This keyword allows you to turn off the large attributes window
            that is shown during header edit. Even if the window is turned
            off, the Alt-keys are still active for toggling attributes.
        
        
        EDITHEADERFIRST <new,changes,replies,forwards,yes/no>  (yes)
        
            This keyword controls the circumstances that will present you with
            the header editor first of all.
        
              New       When entering a new message.
              Changes   When changing a message
              Replies   When making a reply.
              Forwards  When forwarding a message.
              Yes       Always (all of the above).
              No        Never.
        
            The New, Changes, Replies and Forwards values can be combined. YES
            is equivalent to enabling all four of these.
        
            For example, we want to edit the header only when entering a new
            message or when changing a message:
        
              EDITHEADERFIRST New, Changes
        
            If the circumstances match the setup of this keyword, the header
            edit will be bypassed and you will start directly in the EDITMENU
            (if enabled) or in the internal or external editor. A new menu
            item has been added in the EDITSAVEMENU, "Edit Header", which
            allows you to edit the header after you have written your message,
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 41
                                                                              
            but before it is finally saved.
        
            If you set EDITHEADERFIRST to NO, you must either have the
            EDITSAVEMENU enabled, or use the internal editor, because
            otherwise it is not possible to edit the header at all.
        
        
        EDITINTERNAL <yes/no>  (yes)
        
            Specifies if the internal editor should be the default, even if an
            external editor is defined. You can always change the setting in
            the editor menu (if EDITMENU is enabled) before you start writing
            your message.
        
        
        EDITMENU <yes/no>  (yes)
        
            This keyword enables or disables the "Edit menu" that pops up
            right after you have edited the message header. If you disable the
            menu, you will go to the internal or external editor immediately
            and save a keystroke, but you will of course lose the features
            available from the menu, such as selection of template etc.
        
        
        EDITMIXCASE <yes/no>  (no)
        
            If this keyword is enabled, GoldED will automatically format the
            name with uppercase the first letter in words and lowercase the
            rest, when entering names in the header.
        
            Examples:
        
              "odinn sorensen"  or  "ODINN SORENSEN"
        
            These would be re-cased to "Odinn Sorensen".
        
        
        EDITMSGSIZE <bytes>  (64000 in DOS, 512000 in all others)
        
            This lets you limit the size of loaded msgs. GoldED currently
            cannot handle msgs larger than 64k in the DOS version (all other
            platforms do not have this limit). This keyword ensures that the
            system will not get confused and possibly crash or exit, if a 
            message was encountered that was larger than 64k.
        
        
        EDITOR <commandline> [@file] [@line]
        
            With GoldED it is possible to use your favorite text editor or
            even word processor to write messages. With this keyword you
            specify the commandline for the editor.
        
            If you use a word processor, be sure to make it export clean ASCII
            text files without control codes. You may also need to enable the
            DOSSWAP keyword, if the editor or word processor requires a lot of
            free memory to run.
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 42
                                                                              
        
              <commandline>   Program commandline.
              @file           Token which is replaced by the editor message
                              filename.
              @line           Token which is replaced by the @Position
                              template line number.
        
        
        EDITORFILE <file>  (GOLDED.MSG)
        
            Defines the name of the temporary editor message file. This file
            is written by GoldED when swapping to the external editor, or when
            using the EDITsavefile command in the internal editor.
        
            The file is written in the GOLDPATH if there is no explicit path.
        
        
        EDITQUOTEMARGIN <margin>  (75)
        
            Sets the right margin for editing quoted lines in the internal
            editor. This should be set to the same or wider than the
            QUOTEMARGIN.
        
        
        EDITREPLYRE <yes/no/numeric>  (no)
        
            If enabled, GoldED inserts the "Re:" string in front of the
            subject when you reply to a message. If not enabled, GoldED will
            strip any leading "Re:" when you reply to a msg.
        
            The "Re:" string in subjects is an obsolete practice, and today it
            only slows down modern replylinking software. Do yourself and
            others a favor and let GoldED strip the Re: in your replies.
        
            The "numeric" option makes GoldED use numeric Re:'s, of the form
            "Re^n:".
        
            This keyword can be used globally and in Random System groups.
        
        
        EDITSAVEMENU <yes/no>  (yes)
        
            This keyword enables or disables the "Save menu" that pops up
            after you have edited your message in the internal or external
            editor. If you disable the menu, your message will be saved (or
            discarded if not edited) immediately and save you a keystroke, but
            you will also lose the features available from the menu.
        
        
        EDITSAVEUTIL <utilno> <"L menu text">
        
            Defines the external utilities that will be added to the
            EDITSAVEMENU (if enabled). The menu text is inserted in the menu.
            The first two characters of the menu text are the "hotkey" letter
            that will be highlighted in the menu text, plus a space. Example:
        
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 43
                                                                              
              EDITSAVEUTIL 1 "S PGP Sign the msg"
              EDITSAVEUTIL 2 "l PGP Clear-Sign the msg"
              EDITSAVEUTIL 3 "E PGP Encrypt the msg"
              EDITSAVEUTIL 4 "p PGP Encrypt & Sign the msg"
        
            If you have changed the default language in this menu (in
            GOLDLANG.CFG), then make sure the highlight letters don't clash.
        
            With EDITSAVEUTIL definitions and EDITSAVEMENU enabled, you can
            directly call an external utility to do things like encoding or
            encrypting msgs before saving them.
        
        
        EDITSOFTCRXLAT <char>
        
            If a translation char is defined, GoldED will translate the
            soft-cr character (ASCII 141, HEX 8D) in prompts and in the
            internal editor. Example:
        
              EDITSOFTCRXLAT H
        
            This example for russians translates the soft-cr to an 'H'.
        
            Please note that this option only applied when DISPSOFTCR set to
            YES.
        
        
        EDITSPELLCHECK <commandline> [@file]
        
            While in the internal editor, you can use the EDITspellcheck
            command to save your message to a file and shell to external
            spellchecking software. When the check is completed, the corrected
            file is read back and you can continue editing your message. The
            EDITspellcheck command internally uses the EDITsavefile and
            EDITloadfile commands.
        
              <commandline>   Spellchecker program commandline.
              [@file]         Token which is replaced by the message filename
                              (defined by the EDITORFILE keyword).
        
        
        EDITUNDELETE <lines>  (50)
        
            This keyword defines the number of lines to keep in the undelete
            buffer between messages.
        
        
        EMPTYTEARLINE <yes/no>  (no)
        
            With this keyword enabled, GoldED will always strip the tearline
            down to just the three dashes, "---", and instead inserts the PID
            (Product IDentification) kludge line, which contains the same
            information, but in a safer form in a safer place. The PID kludge
            is proposed in FidoNet document FSC-0046.
        
        
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 44
                                                                              
        ENCODEEMAILHEADERS <yes/no>  (yes)
        
            By default headers in e-mails MIME-encoded according to RFC. In
            Russia it is general practice not to encode headers, so you
            probably want to say no if you're in Russia.
        
        
        ENDGROUP
        
            Ends a Random System GROUP definition.
        
        
        EVENT <eventtype> <eventcommand [parameters]>
        
            This keyword allows you to specify which soundfile to play when a
            specfic event occurs. The following <eventtype>'s are defined:
        
              EVENTTYPE       TRIGGER:
        
              Arealist        When the arealist shows.
              AskYesNo        Any Yes/No type prompt.
              Attention       Warnings or information popup messages.
              DosShell        When entering a DOS or OS/2 shell.
              EditComment     When an editcomment is found.
              EndOfMsgs       When there are no more msgs in the area.
              ErrorFatal      Fatal error exit.
              Exit            Exit from GoldED.
              JobDone         Successful completion of a job.
              JobFailed       Unsuccessful completion of a job.
              MsgDeleting     When deleting a msg.
              MsgFromYou      When a msg from you is found.
              MsgIsLocal      When a msg marked Local is found.
              MsgIsTwit       When a msg from a Twit is found.
              MsgToYou        When a msg to you is found.
              SearchFailed    Search operation failed.
              SearchSuccess   Search operation was successful.
              Startup         When the GoldED startup screen shows.
        
            There is currently only one <eventcommand> defined:
        
              PLAY <filename.ext/beepnoise>.
        
            The parameter to PLAY can be either a sound file or one of the
            following standard beepnoises:
        
              TheEnd    A high and a low note.
              GotIt     Two sets of low-high notes.
              TooBad    A falling note.
              ToYou     A rising and falling note.
              SayBiBi   A single beep.
              SOS       Morse S O S (...---...).
        
            If a sound file is specified, the sound driver must support the
            format.
        
            The DOS and 386 versions need a Goldware Sound API compatible TSR
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 45
                                                                              
            or program loader which installs an interrupt service function on
            the multiplex interrupt 2Dh. See the chapter about the Goldware
            Sound API for more details. The GCTVSAPI program loader (released
            separately) currently only supports the CT-VOICE.DRV driver for
            .VOC files.
        
            The OS/2 version relies on MMPM/2 (using the mciSendString API
            call) to play the sound files. On my system with a Sound Blaster
            Pro, MMPM/2 plays both .WAV and (to my surprise) .VOC files. It
            even plays .MID files :-)
        
            The Win32 version uses the Win32 API to play the sound files. It
            should be able to play any multimedia file that Windows knows how
            to handle.
        
            Example usages:
        
              EVENT MsgToYou  PLAY HIMAN.VOC
              EVENT MsgIsTwit PLAY SHOTGUN.VOC
        
            You have to select the sounds carefully and probably with a lot of
            experimentation, unless you want to turn your mailreader into a
            honking, wailing and farting monster and drive your poor family or
            yourself nuts with a cacophony of noises...
        
        
        EXCLUDENODES <addressmask>
        
            You can define up to 50 different addressmasks to be excluded from
            the compiled nodelists. Use this if you are short of space, or the
            nodelist compile takes very long on your system. This keyword is
            used by GoldNODE.
        
            Excluded nodes can be re-included with the INCLUDENODES keyword.
        
        
        EXTERNOPTIONS <-options>
        
            Defines the default options for the EXTERNUTIL's. Valid options:
        
              -Cls            * Clear screen.
              -Cursor         * Cursor in shell.
              -KeepCtrl       * Keep control lines in the message.
              -Pause            Pause for keypress before returning to GoldED.
              -PauseOnError   * Pause only if utility errorlevel is nonzero.
              -Reload         * Reload the message file (@file).
              -Swap           * Swap GoldED out of memory before shelling.
              -Wipe             Wipe editorfile and temporary file after use.
        
            Plus the reverse options with a "No" prefix, for example -NoCls.
            The default options are marked with an asterisk (*).
        
            Use -NoKeepCtrl when you want to clearsign a message. This will
            strip the control lines (kludges, tearline and origin) from the
            message before passing it to the external utility. The tearline
            and origin is appended to the message when reloading it. The
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 46
                                                                              
            default is to keep control lines in the message.
        
            Use -Wipe when you want the temporary unencrypted message files to
            be wiped and removed from the disk after they have been read into
            memory. GoldED wipes a file by writing a block of 512 random bytes
            over the entire length of the file, then truncating it to zero
            bytes and finally deleting it. The default is not to wipe files.
        
        
        EXTERNUTIL <utilno> [-options] <commandline>
        
            This new feature can be used to "filter" msgs, for example calling
            PGP or other encryption utilities.
        
            The <utilno> must be in the range 1 to 24 for utilities that will
            be called with key definitions (see below). Higher numbers can be
            used for utilities that are called from the EDITSAVEMENU (if
            enabled). See the EDITSAVEUTIL keyword for details.
        
            The default options are those specified with the EXTERNOPTIONS
            keyword. With [-options], you can change the those options locally
            for specific utils. See the EXTERNOPTIONS keyword for a list of
            valid options.
        
            The <commandline> specfies the DOS or OS/2 commandline you want to
            execute. This works in the same way as for the external editor and
            spellchecker. See the manual for details about this, especially if
            you want to execute batchfiles. In the <commandline> you can use
            @tokens to transfer information from the msg to the commandline.
            The @tokens are the same as for templates, and in addition you can
            use two other @tokens:
        
              @path     The GOLDPATH, including a trailing backslash.
              @file     The full filename of the message file (GOLDED.MSG)
                        that will be written to disk before the utility is
                        called.
              @tmpfile  The full filename of a temporary message file
                        (GEDTMPxx.xxx) that will be written to disk before the
                        utility is called.
        
            Examples:
        
              EXTERNUTIL 1 c:\4dos\4dos.com /c c:\crypt\encrypt.bat @file
              EXTERNUTIL 2 c:\4dos\4dos.com /c c:\crypt\decrypt.bat @file
        
            To call a defined external utility, you must assign a key to it.
            There are 24 new keyboard commands you can use in GOLDKEYS.CFG for
            this purpose:
        
              ExternUtilNN
        
            Where NN is in the range 01 to 24 _with_ leading zero. Examples:
        
              F11 ExternUtil01
              F12 ExternUtil02
        
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 47
                                                                              
            Then if you press F11, you would call external utility number 1
            and so on. The ExternUtilNN keywords ONLY work in reader mode, not
            in the internal editor or any other place.
        
            HOW IT WORKS:
        
            1.  Just before the external utility is called, GoldED writes the
                current message text to the GOLDED.MSG file in the GOLDPATH.
                The file is written as a textfile with each line CR-LF
                terminated. The content is exactly as you see it on the
                screen, which means that kludges are only included if you have
                enabled kludge viewing. If the -NoKeepCtrl option is used,
                kludges, tearline and origin are stripped before the file is
                written. If the token @tmpfile is used, a temporary file named
                GEDTMPxx.xxx (where xx.xxx is something unique) is created
                with exactly the same content as @file.
        
            2.  GoldED clears the screen and then calls the utility after
                swapping itself out of memory (if swapping is enabled or
                relevant for the version).
        
            3.  The utility can now load and process the @file and/or
                @tmpfile, or do anything else you want. It doesn't have to
                have anything to do with the current msg. You could call a
                spreadsheet, a game, whatever. But I think this feature will
                mainly be used for utilities that process the @file. If the
                utility processes the @file, it could write the changes back
                to the @file.
        
            4.  After returning from the utility, GoldED reloads the @file and
                displays it just as if it was the current message. For
                example, if your utility was a decrypter and the msg was
                encrypted, you would now see the decrypted msg. Neat eh? :-)
        
            5.  If you want to make the reloaded text permanent (save it in
                the msg), you can use the Change Msg function and immediately
                choose "Save Message" from the Editing menu (if enabled with
                EDITMENU Yes). This is in fact the method you could use if you
                wanted to EN-crypt a msg (however, it is easier to use the
                method which involves the EDITSAVEUTIL keyword).
        
            The QUOTESPACING feature can interfere with encoded msgs that
            include the '>' character at the beginning of lines (often seen in
            uuencoded msgs), by automatically inserting blank lines before and
            after the lines with '>'. I have therefore changed the
            quotespacing default from YES to NO. Be sure to check if you have
            a different setting if you are using an older edition of the
            advanced configuration files.
        
            If the string "-----BEGIN PGP MESSAGE-----" is found as the first
            27 characters in a reloaded message, GoldED will automatically add
            the FSC-0073 kludge "^aENC: PGP" to indicate that the message is
            encrypted. This kludge may be used by some software to set up
            alternative routing for encrypted mail which would otherwise be
            bounced if sent through normal channels.
        
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 48
                                                                              
            See the "Using PGP as an External Utility" chapter for batchfile
            examples and instructions on how to use this new feature with PGP.
        
            !!! IMPORTANT !!!  From FidoNet Policy 4.07 (chapter 2.1.4):
        
              "[..] Therefore, encrypted and/or commercial traffic that is
              routed without the express permission of all the links in the
              delivery system constitutes annoying behavior."
        
            So be careful with this feature!
        
            TIP: You can use the EXTERNUTIL feature to setup keys to view or
            print an attached fax. Use something like this in GOLDED.CFG:
        
              EXTERNUTIL 11 c:\zfax\zfax.com pf @subject     ; print fax
              EXTERNUTIL 12 c:\zfax\zfax.com vf @subject     ; view fax
        
            And this in GOLDKEYS.CFG:
        
              @F11  ExternUtil11    ; Press Alt-F11 to print the fax
              @F12  ExternUtil12    ; Press Alt-F12 to view the fax
        
            Or choose your own key assignments and fax view/print utils.
        
            Note that this assumes that the fax file is listed in the subject
            line like an attached file.
        
            NOTE: If you're running GoldED/386 and try to use a Win32 program
            as an EXTERNUTIL, you might get the error "This program cannot be
            run in DOS mode". You can work around this by calling the Win32
            program via the shell. For example if this call fails:
        
              EXTERNUTIL 1 c:\utl\mywin32.exe @file
        
            Replace it with:
        
              EXTERNUTIL 1 command.com /c c:\utl\mywin32.exe @file
        
            Then it should work. If not, try using full path to command.com.
        
        
        EZYCOMMSGBASE <path>
        
            Defines the base path for the Ezycom msgbase. If not set, AREAFILE
            Ezycom will set it.
        
        
        EZYCOMUSERBASE <path>
        
            Defines the base path for the Ezycom userbase. If not set,
            AREAFILE Ezycom will set it.
        
        
        EZYCOMUSERNO <userno>  (0)
        
            Defines the lastread set used in the Ezycom message base.
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 49
                                                                              
        
        
        FIDOHWMARKS <yes/no>  (no)
        
            If enabled, GoldED will use the echomail "highwater mark" (1.MSG)
            to determine if a message is "sent" or "unsent" in *.MSG areas.
        
            NOTE: Some older echomail processors do not update the highwater
            mark in a way that GoldED can recognize. If all messages appear to
            marked "Uns", even after the mail has been scanned out, try
            turning off this keyword.
        
        
        FIDOLASTREAD <file>  (LASTREAD)
        
            Defines the filename of the *.MSG lastread files. DO NOT specify a
            path.
        
        
        FIDOMSGTYPE <Opus/FTS1>  (Opus)
        
            This keyword defines the default format of Fido *.MSG files. It is
            only used by some AREAFILE's when reading external area
            configuration files, where the preferred format is unknown.
        
            The FTS1 (FTS-0001.012 and later) format uses zone/point fields,
            where the Opus format uses date/time stamps. When set to Opus
            format, GoldED interprets the date/time stamps as DOS-style
            bitmapped date/time.
        
        
        FIDONULLFIX <yes/no>  (no)
        
            If set to YES, GoldED will replace NUL chars with LF chars in the
            msg body when reading a Fido *.MSG file. This is slower of course,
            but not noticably on fast machines.
        
            This option was created to enable GoldED users to read msgs that
            were created/handled by brain-dead programs (I don't have names,
            sorry) which are not obeying our primary technical standard:
            FTS-0001. FTS-1 states that a NUL terminates the msg body. But
            sometimes msgs are encountered which have a NUL as the first char
            in the msg body or perhaps in other places, thereby causing GoldED
            to show a blank or cut-off msg. In some Pascal-based readers, such
            as FM, these msgs can be read anyway, because in Pascal a NUL does
            not terminate a string like in C/C++.
        
            NOTE: Even if the new FIDONULLFIX keyword is disabled, GoldED will
            still fix a NUL if it is the _first_ character in the msg body.
            This probably fixes most of these buggy msgs without the overhead
            of checking the entire msg.
        
        
        FIDOUSERLIST <file>
        
            Path and filename of a FIDOUSER.LST file.
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 50
                                                                              
        
            This file is expected to be sorted in ascending alphabetical order
            using plain ASCII case-insensitive sort. Each line in the list is
            expected to be 60 characters plus a CR and a LF, or in other words
            records of 62 bytes each. If the list is produced by a nodelist
            compiler, everything should be okay, but be careful if you have 
            edited the file manually. Note that a FIDOUSER.LST file only
            supports a name lookup (to get the address). 
            
        
        FIDOUSERNO <userno>  (0)
        
            This is an index into the FIDOLASTREAD file. Each user occupies 2
            bytes in the lastread file.
        
        
        FILEALIAS <alias> <filename>
        
            Used to define short alias names for filenames. If you regularly
            write msgs to different files in different paths, this feature is
            very useful, and reduces the risk of typing wrong.
        
            Example:
        
              FILEALIAS DKB R:\DKBBS\DKBBS
        
            With this file alias, you can simply write "DKB" at the filename
            prompt, and the long filename will be used.
        
        
        FILELISTPAGEBAR <yes/no>  (yes)
        
            Enables or disables a pagebar (scrollbar) in the file attach list
            function.
        
        
        FORCETEMPLATE <yes/no>  (no)
        
            If enabled, GoldED will popup a template selection menu when you
            start writing a new msg or reply. If you have both TEMPLATE(s) and
            FORCETEMPLATE in a Random System group, you can tell GoldED to use
            the random template(s) by hitting ESC instead of selecting from
            the menu.
        
            This keyword can be used globally and in Random System groups.
        
        
        FORMFEEDSEPARATOR <yes/no>  (no)
        
            Used when saving messages to file. If enabled, it inserts a Form
            Feed (12d) character after each message.
        
        
        FRQEXT <.ext>
        
            With this keyword you can add extra known filename extensions for
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 51
                                                                              
            the filerequest function. The following extensions are already
            known by default, and need not be defined (duplicate definitions
            are ignored):
        
              .ARC .ARJ .DOC .EXE .GIF .LHA .LZH .JPG .PAK .PNG .RAR .RUN .SDA
              .SDN .TXT .ZIP .ZOO
        
            Each extension _must_ have the leading dot.
        
            Example: FRQEXT .XYZ
        
        FRQNODEMAP <to-node> <from-node>
        
            This keyword is used for the file request feature (Ctrl-F). It
            allows you to define mappings from a nodenumber used in a file
            announcement to another nodenumber. This is useful in the cases
            where a multi-line system announces files using their primary
            nodenumber, which may be a regular V34 modem number, but they also
            have an ISDN number, which you would prefer to use instead.
            Examples:
        
              //         change-to: from:
              FRQNODEMAP 2:236/99   2:236/100
              FRQNODEMAP 2:236/1043 2:236/43
        
            So, if I saw a file announcement from 2:236/100, and requested
            some files, the request would automatically be addressed to
            2:236/99.
        
        
        FRQOPTIONS <options>  (FromTop)
        
            Defines options for the file request function:
        
              Sort        Sort the list of files alphabetically.
              FromTop     Scan the message from the top of the message.
              NotFromTop  Scan the message from the top of the screen.
              NoFiles     Don't list the file FILES if no files were found.
              NoWazooMsg  Don't save the request message.
              Fast        Bypass the header edit and save the msg immediately.
        
            By default, the "FromTop" option is enabled. If you often request
            files from very long announcement messages, you might find it very
            useful to set the "NotFromTop" option.
        
            The "NoFiles" option was added because if no filenames are found
            in a message, the file request function defaults to listing the
            magic name FILES instead of complaining that no files were found.
        
            If the FRQWAZOO keyword is enabled, the default behaviour is to
            save the request message with the FRQ attribute stripped. Use the
            "NoWazooMsg" option if you don't want the request message.
        
            Use the "Fast" option if you find that you almost never change the
            destination of the file request message anyway. If you enable this
            option, remember that you can always go over to the netmail area
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 52
                                                                              
            and change the file request message before it is sent.
        
            The UseFlowFile option enables a feature which was default in
            2.50, but which I have been informed is problematic for modern
            mailers in some setups. The default is now to ONLY create/update
            the .REQ file and NOT also touch/create a .?LO flowfile.
        
        
        FRQWAZOO <yes/no>  (no)
        
            If enabled, GoldED will create WaZOO .REQ files instead of file
            request messages. You must define an OUTBOUNDPATH if you enable
            this feature.
        
        
        GEDHANDSHAKE <yes/no>  (yes)
        
            If this switch set to yes GoldEd displays handshake char in
            statusline. If you annoyed with this feature you could hide this
            character by setting this option to no.
        
        
        GERMANKEYBOARD <yes/no>  (autodetect)
         
            This option is meanful for w32 version only. Due to right Alt key
            required to enter some native characters in german version of
            Windows it could be defined to yes for this.
        
        
        GOLDBASEPATH <path>
        
            Specifies the directory where GoldED can find the Goldbase msgbase
            files.
        
        
        GOLDBASESYSPATH <path>
        
            Specifies the directory where GoldED can find the NETMAIL.DAT and
            ECHOMAIL.DAT files of the Goldbase msgbase. If not specified, the
            GOLDBASEPATH is used.
        
        
        GOLDBASEUSERNO <userno>  (0)
        
            Specifies the lastread set used in the Goldbase message base.
        
        
        GOLDPATH <path>
        
            This is the path where GoldED finds all it's control files. It is
            not necessary to define this, unless you have special needs. The
            GOLDPATH defaults to directory where the GOLDED.CFG file was
            found.
        
        
        GROUP <groupname>
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 53
                                                                              
        
            Starts a Random System group. See the Random System chapter for
            details.
        
        
        HAPPYBIRTHDAY <value>
        
            The only valid value is "friend". Currently do nothing.
        
        
        HIGHLIGHTUNREAD <yes/no>  (no)
        
            If enabled, GoldED updates (increases) the "timesread" field in
            each message that you read. If set to NO, it doesn't touch the
            message. The YES setting causes a slight performance decrease,
            because the header of each message has to be read, the timesread
            field updated and the header written back to disk. The update
            happens immediately after the message is displayed, so you may not
            notice it at all. A message is only updated if the timesread field
            contains the value 0 (zero).
        
            This keyword only works in the following msgbase formats: Fido
            (*.MSG), Hudson, Goldbase, JAM, Squish, Ezycom and AdeptXBBS. In
            Squish and Ezycom, there is no timesread field, but I have annexed
            a reserved message attribute (in Squish, 0x00080000, now called
            MSGSEEN; in Ezycom, extattr 0x80) for the purpose of marking a
            message as read at least once. The other formats (PCBoard,
            WildCat) have no timesread field, but they have reserved fields or
            attributes which *could* be used. Let me know if you want this.
        
        
        HUDSONPATH <path>
        
            Specifies the directory where GoldED can find the Hudson msgbase
            files.
        
        
        HUDSONSIZEWARN <size in bytes>  (16000000)
        
            When the Hudson MSGTXT.BBS file exceeds this size, GoldED starts
            to warn that the msgbase is getting dangerously close to the
            structural limit (which is 16MB for the MSGTXT.BBS file). With
            this keyword you can raise or lower the warning size in case you
            think the default is too low or too high.
        
        
        HUDSONSYSPATH <path>
        
            Specifies the directory where GoldED can find the NETMAIL.BBS and
            ECHOMAIL.BBS files of the Hudson msgbase. If not specified, the
            HUDSONPATH is used.
        
        
        HUDSONUSERNO <userno>  (0)
        
            Specifies the lastread set used in the Hudson message base.
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 54
                                                                              
        
        
        IGNORECHARSET <yes/no>  (no)
        
            If set to yes then GoldEd ignores CHRS kludges in messages thus
            you will be able to switch codepage in messages with inappropriate
            charset.
        
        
        IMPORTBEGIN <text>  ("=== Cut ===")
        
            This keyword, together with IMPORTEND, defines some text to add in
            the beginning and end of an imported text file in the internal
            editor. If only IMPORTBEGIN is defined, the text is also used for
            the IMPORTEND. The <text> may be enclosed in quotes ("") if
            leading or trailing spaces are needed. The quotes are stripped.
        
            The replacement token "@file" can be used in the <text>. It will
            be replaced with the import filename as entered.
        
            Example:
        
              IMPORTBEGIN === Cut Begin: @file ===
              IMPORTEND === Cut End ===
        
        
        IMPORTEND <text>  (same as IMPORTBEGIN)
        
            See IMPORTBEGIN.
        
        
        INBOUNDPATH <path>  (defaults to GOLDPATH)
        
            The inbound path is currently only used with the file request
            feature (the READfilerequest command, <Ctrl-F>). If you use this
            feature, GoldED will put the file descriptions into a FILES.BBS in
            the inbound path, ready for when the requested files are moved to
            the correct file areas.
        
        
        INCLUDENODES <addressmask>
        
            You can define up to 50 different addressmasks to be included from
            the compiled nodelists. This is only used in conjunction with the
            EXCLUDENODES keyword to include otherwise EXcluded nodes. This
            keyword is only used by GoldNODE.
        
        
        INPUTFILE <filename>  (*)
        
            Defines the default name in the internal editor file import
            function.
        
            GoldED can automatically uuencode and apply a base64 encoding to
            the files during importing them into the internal editor.
        
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 55
                                                                              
            NOTE: This is a very simple implementation of encoders. It cannot
            split large files over several messages. The file mode number 644 
            is hard-coded and has nothing to do with the actual file mode.
        
            This keyword can be used globally and in Random System groups.
        
        
        INTENSECOLORS <yes/no>  (no)
        
            GoldED is capable of switching off the "blink" color, and thereby
            enabling the use of bright background (paper) colors. Enable this
            keyword, and try out one of the intense color setup examples.
        
        
        INTERNETADDRESS <internet-address>
        
            Specifies your Internet address. This must be the address only, no
            name. The INTERNETADDRESS and USERNAME will be combined to a
            standard "From: internetaddresss (username)" headerline when you
            write e-mail or articles.
        
            Example:
        
              USERNAME Odinn Sorensen
              INTERNETADDRESS odinn@ibm.net
        
            Produces the RFC line:
        
              From: odinn@ibm.net (Odinn Sorensen)
        
        INTERNETDOMAIN <domainname> (username%domain.net)
        
            Defines the domain-part of outgouing Message-ID's. If you don't
            know your full domain, leave it as default, which should work just
            fine.
        
        
        INTERNETGATE [gatename<,>]<address>
        
            Defines the local Internet gate you use when sending netmail to
            Internet users. This option is activated when you write an
            Internet address in the TO: field in the header display. GoldED
            detects the Internet address by looking for the '@' character. If
            detected, GoldED puts the gate address from INTERNETGATE in the
            TO: address field. If you have defined the optional gate name
            (typically UUCP), GoldED also replaces the typed Internet address
            with the gate name and puts the Internet address in a TO: line in
            the message body. Some gate software accepts the Internet address
            directly in the header, while other software may need the special
            (UUCP) name and a separate TO: line. Examples:
        
              INTERNETGATE UUCP, 1:105/42     ; Standard, with gate name
              INTERNETGATE 2:230/9316         ; My uplink runs GIGO software
        
            This keyword can be used globally in GOLDED.CFG, if you only ever
            use one gate, or in GROUP's for specific areas in GOLDRAND.CFG if
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 56
                                                                              
            you have multiple netmail areas and regularly use more than one
            gate.
        
            NOTE: If you enable the INTERNETRFCBODY keyword, you should always
            use the gatename UUCP, because otherwise the gateway software may
            send duplicate copies (carbon copies) of your e-mails.
        
        
        INTERNETLOOKUP <yes/no>  (no)
        
            If set to Yes, GoldED will check the systemname in the nodelist
            when doing a lookup and if the systemname looks like an Internet
            address (contains an '@' char), the msg will be addressed to that
            Internet address using the INTERNETGATE name/address if defined.
        
            For example, let's say there was something like this in the
            nodelist:
        
              ,999,somebody@somewhere,Whereever,Some_Body,...
        
            And this in my GOLDED.CFG:
        
              INTERNETLOOKUP Yes
              INTERNETGATE 2:230/9316
        
            Then if I did a lookup of "Some Body" and selected the entry with
            the Internet address, GoldED would make a msg looking like this:
        
              --------------------------------------
              From : odinn@winboss.dk     2:236/77
              To   : somebody@somewhere   2:230/9316
              Subj : whatever
              --------------------------------------
        
            Or if my gate was defined as "INTERNETGATE UUCP 2:230/9316":
        
              --------------------------------------
              From : odinn@winboss.dk     2:236/77
              To   : UUCP                 2:230/9316
              Subj : whatever
              --------------------------------------
              To: somebody@somewhere
        
            So what's the use of all this?  It allows you to make a
            nodelist-style list of users with Internet addresses and use it
            with GoldED so that you can do a lookup of normal names instead of
            trying to remember strange Internet addresses. Of course something
            similar could be done using the ADDRESSMACRO's, but with the
            nodelist approach, you could build a "network" of users which have
            offline Internet access via FTN-gate software and distribute the
            nodelist for automatic processing.
        
        
        INTERNETMSGID <yes/no>  (no)
        
            Specifies whether the FTN MSGID kludge should contain an RFC1036
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 57
                                                                              
            compatible Message-ID or the normal FTS-9 format. Note that using
            the RFC1036 format in MSGID breaks the FTS-9 (version 001)
            specification, so please don't use this feature in FidoNet netmail
            or echomail. As a safeguard, GoldED will only use the RFC1036
            format in areas specifically marked as e-mail or newsgroups, using
            the SOUPEMAIL and SOUPNEWSRCFILE keywords or using the Email and
            News area types with the AREADEF keyword, even when INTERNETMSGID
            is set to YES globally.
        
        
        INTERNETREPLY <yes/no>  (yes)
        
            When INTERNETREPLY is enabled, GoldED always uses the FSC-35
            REPLYADDR/REPLYTO kludges to gate replies to msgs from Internet
            correctly. If disabled, GoldED only uses the FSC-35 method if the
            Internet address is too large to fit in the max-35-character TO:
            header field. Some gate software requires that the FSC-35 method
            is used, while other software accepts Internet addresses directly
            in the header.
        
        
        INTERNETRFCBODY <yes/no>  (no)
        
            Tells GoldED whether to look for and process RFC headerlines at
            the top of the message body, before the first empty line. Also
            tells GoldED to insert its own RFC headerlines at the top of the
            message body instead of as kludge lines. This option should only
            be used when receiving Internet mail as QWK packets where the RFC
            headerlines are usually found at the top of the messages, or when
            sending Internet mail via FTN packet to a gateway running GIGO.
            GIGO does not recognize RFC header in kludges, but it does
            recognize them at the top of the messages, if it is properly
            configured (with lines of "Allow_Xxx:" in GIGO's HEADERS.CFG,
            where Xxx are the RFC headerlines the gate administrator wants to
            allow).
        
        
        INTERNETSERVER <nntp/smpt> <server>
        INTERNETSERVER <pop3> <server> [<username>] [<password>]
        
            No code currently associated with this keyword.
        
        
        INVALIDATE <type> <"findstring"> <"replacestring">
        
            This is used to invalidate (change) certain control strings in
            quoted text. Use this in conjunction with old versions of D'Bridge
            or other software that chokes on control strings in quoted text.
            As an added bonus feature, if the tearline or origin is
            invalidated to a null string (""), they will not be quoted at all.
        
            The <type> can be one of the following:
        
              Tearline  Invalidate tearline ("---").
              Origin    Invalidate origin (" * Origin: ").
              Seenby    Invalidate SEEN-BY's.
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 58
                                                                              
        
            By default, the following invalidations are used:
        
              INVALIDATE Tearline "---"           "-+-"
              INVALIDATE Origin   " * Origin: "   " + Origin: "
              INVALIDATE Seenby   "SEEN-BY"       "SEEN+BY"
        
            If you want to disable invalidation entirely, use this:
        
              INVALIDATE Tearline "---" "---"
              INVALIDATE Origin   " * Origin: " " * Origin: "
              INVALIDATE Seenby   "SEEN-BY" "SEEN-BY"
        
            The defined INVALIDATEs are also used during importing a file when
            editing a mail in the internal message editor.
        
        
        JAMHARDDELETE <yes/no>  (no)
        
            The default setting makes GoldED conform to the JAMAPI specs when
            deleting msgs in JAM msgbases. This means that deleted msgs are
            only marked as such in the message header, not in the index. As a
            result, GoldED will find and display the deleted msgs until you
            run a message pack utility to physically remove the deleted msgs.
        
            If JAMHARDDELETE is set to Yes, GoldED will zap the reference to
            the message in the index when deleting msgs. This way the deleted
            msgs will not show up again later. The drawback of this approach
            is that it is hard to undelete msgs, and may break other software
            which assume 100% to-the-letter conformance to the specs. Note
            however, that the hard-delete method is transparent to normal use
            of JAM msgbases. Probably the only software that might break are
            undelete utilities.
        
            For the techies and programmers, the hard-delete method is simply
            setting both UserCRC and HdrOffset in the index to 0xFFFFFFFF
            instead of only the UserCRC. According to the JAMAPI specs, a
            value of 0xFFFFFFFF in HdrOffset means that "there is no
            corresponding message header". Sounds remarkably like a deleted
            msg, right? :-)
        
        
        JAMPATH <path>  (defaults to the HUDSONPATH)
        
            Defines the path where GoldED can access the NETMAIL/ECHOMAIL.JAM
            files, which are used by mail processors to find and scan out mail
            written by users.
        
            GoldED can handle enviroment variables correctly in paths
            specified in connection with this keyword. For example, if a path
            is defined as %MAIL%\path\name, and SET MAIL=C:\POINT is in
            AUTOEXEC.BAT (or whatever), then GoldED translates the path to
            C:\POINT\path\name.
            NOTE: The translation is done at config compile time, so if you
            change the environment variable and haven't changed anything else
            that would cause GoldED to recompile it's config, you must force
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 59
                                                                              
            it with the -F or -FF command parameter.
        
        
        KEYBCLEAR <yes/no>  (no)
        
            Tells GoldED whether or not to clear the keyboard buffer on
            startup. This also clears KEYBSTACK or commandline key stuffing.
            In older versions of GoldED, it was necessary to enable this
            keyword if you had renamed GOLDED.EXE to DBEDIT.EXE. This version
            detects the .EXE renaming and automatically enables KEYBCLEAR,
            regardless of the configuration setting.
        
        
        KEYBDEFAULTS <yes/no>  (yes)
        
            GoldED defines a default keyboard configuration setup internally.
            The keys can be reconfigured in the GOLDKEYS.CFG file. By default,
            the internal keyboard setup is active always, redefinable with the
            definitions in GOLDKEYS.CFG. But in some cases it can be
            preferrable that the internal keyboard setup is turned off, so
            that only the keys in GOLDKEYS.CFG are active. If you want this,
            set KEYBDEFAULTS to NO.
        
        
        KEYBEXT <yes/no>  (detect)
        
            If enabled, GoldED will use extended bios calls to read the
            keyboard. With the extended keyboard, you can use keys like
            <Alt-Left>, <Alt-Home> and other extended keys. If you don't have
            an extended keyboard, don't despair - using a few neat tricks, I
            have made it possible to use some of the extended keys even with a
            non-extended keyboard.
        
        
        KEYBMODE <poll/block>  (poll)
        
            If this option is set to Poll, GoldED switches its keyboard
            handling code from "blocking" to "polling" mode. This enables
            GoldED to provide a continuously running statusline clock,
            automatic internal editor autosave, timeout exit and screensaver.
            If set to Block, the timeout exit and screensaver are disabled,
            and the clock and autosave are dependent on key presses.
        
            In order to minimize waste of CPU resources in keyboard polling
            mode, GoldED automatically detects DESQview, Windows and OS/2 and
            releases timeslices during the keyboard poll.
        
        
        KEYBSTACK <keystring>
        
            With this keyword, you can "stack" keys in the keyboard buffer.
            The KEYBSTACK can be overridden by commandline keystacking, which
            uses the same syntax.
        
            The <keystring> can be a mixture of the following:
        
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 60
                                                                              
              ^Char     Ctrl-key (^Letter).
              ~Char     Ctrl-key (~Letter). (Use this with 4DOS!).
              @Key      Alt-key (@Number or @Letter).
              Char      Literal character.
              "String"  String, enclosed in double quotes.
              'String'  String, enclosed in single quotes.
              Number    Keyboard scan code (decimal).
              !         Clear keyboard buffer.
        
            Whitespace (space and tab) is ignored, except in quoted strings.
        
            See the Macros and Keystacking chapter for more info.
        
        
        KLUDGE <kludge-definition>
        
            The definition may optionally be enclosed in quotes. A definition
            must be enclosed in quotes if it contains leading or trailing
            spaces. The KLUDGE tells GoldED which kludges it should consider
            as "known" in addition to the built-in known kludges.
        
            Here are a bunch of examples, most of which are kludges generated
            by the GIGO Internet gateway software:
        
              KLUDGE "  "                 ; For wrapped kludges
              KLUDGE "Content-Type:"
              KLUDGE "Date:"
              KLUDGE "From:"
              KLUDGE "In-Reply-To:"
              KLUDGE "Message-Id:"
              KLUDGE "Mime-Version:"
              KLUDGE "Organization:"
              KLUDGE "Newsgroups:"
              KLUDGE "Received:"
              KLUDGE "Reply-To:"
              KLUDGE "Sender:"
              KLUDGE "Subject:"
              KLUDGE "To:"
              KLUDGE "Errors-To:"
              KLUDGE "X-FTN-From:"
              KLUDGE "ORIGREF:"           ; Gated?
              KLUDGE "ORIGID:"            ; Gated?
              KLUDGE "RFC-"               ; Seen in NET_DEV
        
            The kludges defined with KLUDGE are not case-sensitive, but when
            GoldED looks for the kludges, it matches to the exact length. This
            means that for example "RFC-" will match all kludges beginning
            with that string.
        
            The ASCII 1 kludge char should not be included in the definition
            string, but GoldED can handle it if you do.
        
        
        KLUDGECHRS <yes/no>  (yes)
        
            If set to YES, GoldED uses the "^aCHRS" kludge instead of the
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 61
                                                                              
            "^aCHARSET" kludge when appropriate.
        
        
        LOADLANGUAGE <file>
        
            If defined, this keyword will load a language definition file.
        
            This feature can be used to load a small set of national language
            definitions in national areas, an english set in international
            areas, etc. Typically this would be used to load the definitions
            of the date/time strings for use in the template and the
            Msg/From/To/Subj strings in the header display.
        
            In the ADVANCED archive, a set of GEDLNG*.CFG files are provided,
            which are designed for use with LOADLANGUAGE. Please note that
            there is also a @loadlanguage template token. This way you can
            choose to load a language file from the template, or by using the
            Random System. The template token takes precedence over the
            LOADLANGUAGE in the Random System, but if both are defined, both
            will be loaded.
        
            This keyword can be used globally and in Random System groups, but
            it is probably not very useful when used globally.
        
        
        LOGFILE <file>  (GOLDED.LOG)
        
            Defines the name of the GoldED logfile. You should not change the
            default.
        
        
        LOGFORMAT <fd,max,bink,qbbs,db>  (fd)
        
            Defines the log format GoldED should use when writing to the
            logfile.
        
        
        LOOKUPECHO <yes/no>  (no)
        
            If enabled, GoldED will use nodelist lookup when entering the TO:
            name in msgs in echomail areas.
        
            GoldED *won't* lookup the name if it exactly matches the current
            WHOTO - text. This is a feature, because a lookup of "All" is not
            very useful. :-)
        
        
        LOOKUPLOCAL <yes/no>  (no)
        
            If enabled, GoldED will use nodelist lookup when entering the TO:
            name in msgs in local areas.
        
            GoldED *won't* lookup the name if it exactly matches the current
            WHOTO - text. This is a feature, because a lookup of "All" is not
            very useful. :-)
        
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 62
                                                                              
        
        LOOKUPNET <yes/no>  (yes)
        
            If enabled, GoldED will use nodelist lookup when entering the TO:
            name in msgs in netmail areas.
        
        
        LOOKUPUSERBASE <yes/no>  (no)
        
            If enabled, GoldED will attempt to find a matching username in the
            user database if a to-name with wildcards is entered in echo or
            local areas.
        
            The userbase lookup feature is not new, but a need arose for an
            option to turn off the lookup. I decided to let the default be to
            disable the lookup. Previously the lookup was always enabled.
        
        
        MAILINGLIST <echoid> <senderaddress> [contribution address]
        
            Defines one or more mailing lists. When importing e-mail from a
            SOUP packet, GoldED will look at the Internet address in the
            "Sender" header and if it matches one of the MAILINGLIST's, the
            e-mail will be tossed to the defined area. Note that GoldED
            supports only participation in, not hosting of mailing lists. The
            contribution address is the destination Internet address for mail
            you write to the mailing list - the address is typically given to
            you when you subscribe to a list. If the contribution address is
            not specified, the senderaddress is assumed.
        
        MAILTOSS <echoid> <contribution-address> <pattern>
        
            This is acutally the same as MAILINGLIST in disguise with the
            parameters recorded and it also enables the full set of pattern
            matching. The <pattern> can be written exactly as if in the prompt
            for the advanced search feature.
        
            Any number of MAILTOSS lines can be given for a particular list,
            if there is for some reason no single way to identify the list.
        
            When determining the contribution address, the first MAILTOSS
            (or MAILINGLIST) that matches the echoid is chosen.
        
            MAILTOSS and MAILINGLIST can both be used at the same time and for
            the same lists. MAILINGLIST is always the faster, because it looks
            only at specific headerlines. MAILTOSS uses much more complex
            pattern matching and can even match based on message body content.
        
        
        MAPPATH <server filespec> <local filespec>
        
            This keyword is used to map paths, for example if you have
            different drive letters on a server machine and a workstation. You
            might have your FidoNet mailer and mail processor setup to run
            with the server drive letter (C:), but run GoldED from a
            workstation where that drive is mapped to a different letter (J:).
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 63
                                                                              
            If you use AREAFILE's to get the area configuration for GoldED,
            you need to use MAPPATH to map the server drive letter to the
            workstation equivalent.
        
            Another case might be that you have a setup with DOS-style paths
            and want to run the Linux version with the same GoldED setup. You
            can then use MAPPATH to map the DOS drive-based paths to Unix
            style paths.
        
            Examples:
        
              MAPPATH C: J:
              MAPPATH C:\ /mnt/dos/c/
        
            NOTE: You don't have to worry about backslash/forwardslash in this
            case - they are always mapped automatically to the correct type
            for the operating system.
        
        
        MEMBER <echoid>
        
            Defines Random System group members. See the Random System chapter
            for details.
        
        
        MENUDROPMSG <yes/no>  (no)
        
            Defines the default selection in the "Drop This Msg?" menu.
        
        
        MENUMARKED <marked/current/previous/default>  (default)
        
            Specifies the position of the selection bar in the Marked/Current
            menu.
        
              Marked    Set selector to Marked.
              Current   Set selector to Current.
              Previous  Set selector to previously selection.
              Default   Set selector to Marked if there are marked msgs.
        
            Note that older versions (before 2.50) used the equivalent of the
            "previous" setting.
        
        
        MOUSE <yes/no>  (no)
        
            The mouse support in GoldED is currently not functional, so this
            keyword is ignored.
        
        
        MSGLISTDATE <written/arrived/received/no>  (written)
        
            Can be used globally and in groups. This keyword specifies the
            default date shown in the right column in the message list. If
            "no" is specified, the date column is removed and the space used
            to widen the other columns. Personally I prefer to see the
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 64
                                                                              
            "arrived" date, which is why I implemented this feature.
        
            The key command LISTtoggledate (Ctrl-D) toggles between them.
        
            Note that the "arrived" date doubles as the "processed" date for
            messages that are written locally and scanned out from your
            messagebase.
        
            Not all messagebase formats supports all three dates. The table
            below shows which messagebase supports which dates:
        
                          Written  Arrived  Received
              JAM            X        X        X
              *.MSG          X        X
              Squish         X        X
              Ezycom         X        X
              Hudson         X
              Goldbase       X
              PCBoard        X
        
            If a date is not supported, "n/a" (for "not available") is shown
            instead.
        
        
        MSGLISTFAST <yes/no>  (yes)
        
            The message lister can operate in two ways, fast or slow. In the
            fast mode, only the message headers are loaded for the list
            information. Depending on the msgbase format and message type,
            some information may not be quite the same when presented in the
            lister because information which is gathered from kludges or other
            control information in the message text will be missing. Most of
            the time this may not be a problem, so if you want speed, chose
            the fast mode (default).
        
            The slow mode loads and fully interprets the content of each
            message before the message list is presented. The slowness is most
            noticable when entering the lister and when paging up and down.
            You may want to use the slow mode for areas with Internet
            newsgroups and e-mail, where GoldED uses the "From" kludge to get
            the real name of the message writer.
        
            This keyword can be used globally and in Random System groups.
        
        
        MSGLISTFIRST <yes/no>  (no)
        
            If enabled, GoldED automatically starts the message lister when
            entering an area.
        
            This keyword can be used globally and in Random System groups.
        
        
        MSGLISTHEADER <yes/no>  (no)
        
            If enabled, GoldED shows the header of the current message when
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 65
                                                                              
            you scroll the bar up and down. This is how it worked in previous
            versions. If disabled, GoldED does not show the header and instead
            uses the screen space to show more messages. By eliminating the
            header display, it is also much faster at scrolling the list.
        
            This keyword can be used globally and in Random System groups.
        
        
        MSGLISTPAGEBAR <yes/no>  (yes)
        
            Enables or disables a pagebar (scrollbar) in the message list.
        
        
        MSGLISTVIEWSUBJ <yes/no>  (yes)
        
            If enabled, GoldED will display the full subject in the bottom
            border of the list window. Note that this feature slows down
            scrolling a bit.
        
        
        MSGLISTWIDESUBJ <yes/no>  (no)
        
            If enabled, the Subject column is made wider by removing the To
            column. This is especially useful in gated Internet newsgroups,
            where the To name is always "All".
        
            You can toggle between wide and short subject with Ctrl-B
            (keycommand LISTtogglewidesubj).
        
            This keyword can be used globally and in Random System groups.
        
        
        NAMESFILE <file>  (NAMES.FD)
        
            GoldED supports the "address macro" file supported by FrontDoor
            and Maximus. If no path is specified, the file is first searched
            for in the path from the "FD" environment variable and then the
            GOLDPATH, if the FD variable failed.
        
            The address macros are added *after* those defined with the
            ADDRESSMACRO keyword (if any) (see this for details on the
            format).
        
        
        NICKNAME <your pseudo>
        
            Defines the nick name (pseudo) for the current USERNAME. Can be
            used globally and in random system groups.
            
        
        NODELIST <file> [zone/addr]
        
            Here you define the nodelists that are used by GoldED and the
            companion nodelist compiler GoldNODE. The nodelists must generally
            be in the standard "St.Louis" nodelist format, but they can also
            contain FrontDoor/Version7 style Boss/Point extensions. The
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 66
                                                                              
            default zone is defined by the first ADDRESS or AKA, but can be
            overridden by adding the zone number or a full address after the
            filename. GoldED currently needs it's own special index files to
            use the nodelists. These index files are created by GoldNODE.
        
              <file>        Nodelist file. If the extension is .999 or a
                            wildcard (".*"), the newest file with a numeric
                            extension is used.
              [zone/addr]   Default zone or address for the nodelist (if no
                            zone info is present in the list itself).
        
            See also the USERLIST keyword, and the Nodelist Browsing chapter.
        
            NOTE: If you have nodelists with duplicate some of each others
            nodes, the nodelist with the newest or most correct entries should
            be placed LAST, and you should use the -D (remove duplicates)
            option with GoldNODE.
        
        
        NODELISTWARN <yes/no>  (yes)
        
            If set to YES, GoldED will warn you during startup if one or more
            nodelists are missing. Use NO to disable the warning if it bothers
            you or you delete/pack your nodelists when the nodelists are
            compiled.
        
            NOTE: GoldED can work fine with lookups etc. without nodelists as
            long as it can access its own indexes (GOLDNODE.GX?). Only the
            extra details will be missing.
        
        
        NODEPATH <path>
        
            This is where GoldED and GoldNODE finds the nodelist files and
            indexes.
        
        
        NODEPATHFD <path>
        
            Path where GoldED can find the FrontDoor nodelist index files.
        
        
        NODEPATHIM <path>
        
            Path to the InterMail nodelist index files. This is actually just
            an alias name of the NODEPATHFD keyword, since InterMail and
            FrontDoor uses the same nodelist index files.
        
        
        NODEPATHV7 <path>
        
            Path where GoldED can find the Version 7 nodelist index files.
        
            NOTE: For the Version 7 nodelist index support, GoldED *requires*
            that the files SYSOP.NDX, NODEX.NDX and NODEX.DAT are present.
            None of these files may be missing and no other filenames are
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 67
                                                                              
            supported. Multiple sets of index files are not supported.
        
        NODEV7FLAGS <flag> <value>
        
            The Version 7 nodelist index does not by default define any
            nodelist flags except the CM flag. Unfortunately the V7 index does
            not point to the actual nodelist, it only has some bits which are
            marked "reserved" in the specifications. The NODEV7FLAGS keyword
            allows you to define the meaning of each of these bits.
        
            The <value> field can be a number or a bit number. Allowed numbers
            are: 32, 64, 128, 256, 512, 1024, 2048, 8192 and 16384. Allowed
            bit numbers are: b5, b6, b7, b8, b9, b10, b11, b13 and b14.
        
            Example:
        
              NODEV7FLAGS MO  b5
              NODEV7FLAGS LO  b6
              NODEV7FLAGS MN  b7
              NODEV7FLAGS NC  b8
              NODEV7FLAGS ZEC b9
              NODEV7FLAGS REC b10
              NODEV7FLAGS NEC b11
              NODEV7FLAGS XA  b13
              NODEV7FLAGS XX  b14
        
            See also the NODEV7MODEM keyword for other nodelist flags.
        
            The nodelist flag bits in the index files are put in by your
            Version 7 nodelist compiler. You must make sure that the nodelist
            flag definitions in your nodelist compiler setup match those in
            your GoldED setup.
        
        
        NODEV7MODEM <type> <value>
        
            The Version 7 nodelist index does not by default define any
            nodelist modem type flags. Unfortunately the V7 index does not
            point to the actual nodelist, it only has some bits which are
            marked "reserved" in the specifications. The NODEV7MODEM keyword
            allows you to define the meaning of each of these bits.
        
            The <value> field can be a number or a bit number. Allowed numbers
            are: 1, 2, 4, 8, 16, 32, 64 and 128. Allowed bit numbers are: b0,
            b1, b2, b3, b4, b5, b6 and b7.
        
            Example:
        
              NODEV7MODEM VFC  b0
              NODEV7MODEM HST  b1
              NODEV7MODEM V34T b2
              NODEV7MODEM V32B b3
              NODEV7MODEM V34  b4
              NODEV7MODEM V42B b5
              NODEV7MODEM ZYX  b6
              NODEV7MODEM ISDN b7
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 68
                                                                              
        
            See also the NODEV7FLAGS keyword for other nodelist flags.
        
            The modem type bits in the index files are put in by your Version
            7 nodelist compiler. You must make sure that the modem type
            definitions in your nodelist compiler setup match those in your
            GoldED setup.
        
        
        ORGANIZATION <text>
        
            Specifies the content of the RFC Organization header for Internet
            messages.
        
        
        ORIGIN <"string">
        
            You can define many different origins for use in GoldED. You can
            select one of the defined origins from the Origin selection menu
            (the READchangeorigin keyword), which is also available from the
            EDITMENU and the EDITSAVEMENU.
        
            Leading and/or trailing spaces can be added by enclosing the
            origin string in quotes.
        
            This keyword can be used globally and in a Random System group.
        
            NOTE: Origins defined in the Random System will always override
            the global origins defined with this keyword, except when they are
            selected from the EDITSAVEMENU.
        
        
        OUTBOUNDPATH <path>
        
            Defines a Binkley-style outbound path. Currently only used for
            WaZOO .REQ file requests (see FRQWAZOO). This should be the name
            of your primary outbound without extension.
        
        
        OUTPUTFILE <file>
        
            This is the default name of the file written using the
            READwritemsg command.
        
            This keyword can be used globally and in a Random System group.
        
        
        OVERLAY <ems/ext/disk>  (ems)
        
            This keyword controls where GoldED places the overlay swap blocks.
            GoldED (the standard DOS version) uses the Borland VROOMM dynamic
            overlays to decrease the resident executable code.
        
            See the DOSSWAP keyword for a warning note!
        
            Ignored by the 386, W32 and OS/2 versions.
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 69
                                                                              
        
        
        PCBOARDPATH <path>
        
            Defines the default path where GoldED should look for the PCBoard
            setup files if it can't find the PCBOARD environment variable.
        
        
        PCBOARDUSERNO <userno>  (0)
        
            Specifies the lastread set used in the PCBoard message base.
        
        
        PERSONALMAIL <startup,allnames>
        
            Specifies options regarding the personal mail scan feature. None
            of them are enabled by default.
        
            If the "startup" option is used, GoldED scans for personal mail
            while doing the startup mail scan.
        
            If the "allnames" option is used, GoldED scans for mail to all the
            USERNAME's instead of only the first. The default is not to scan
            for personal mail at startup and to scan only for the first name.
            This is faster.
        
            Example:
        
              PERSONALMAIL Startup, AllNames
        
            The example makes GoldED scan for personal mail to all your
            USERNAME's at startup.
        
        
        PLAY <filename.ext/beepnoise>
        
            See the EVENT keyword for a definition of the PLAY parameters.
        
            This keyword can be used globally and in a Random System group.
        
        
        PRINTDEVICE <devicename>  (PRN)
        
            Defines the name of the device used for printing. PRN is the
            default, but LPTx can also be used. Printers on COMx ports may
            also work, but this has not been tested.
        
            Devices are opened in Write-Only text mode. The function has been
            successfully tested to work with two popular peer-to-peer network
            packages.
        
            You should NOT use a filename as devicename. Use the filename
            option in the Write menu instead.
        
        
        PRINTFORMFEED <yes/no>  (yes)
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 70
                                                                              
        
            Used when printing messages. If enabled, it prints a Form Feed
            (12d) character after each message.
        
        
        PRINTINIT <printstring>
        
            This keyword defines the command string sent to your printer to
            initialize it before the actual printing.
        
            The <printstring> can contain items like these:
        
              $Hex          A hexadecimal string.
              #Decimal      A decimal (integer) number.
              "String"      Text string, enclosed in double quotes.
              'String'      Text string, enclosed in single quotes.
              Other chars   Ignored.
        
        
        PRINTLENGTH <lines>  (60)
        
            Defines the number of lines per page for printing. A formfeed is
            printed when every time PRINTLENGTH lines have been printed.
        
        
        PRINTMARGIN <characters>  (80)
        
            The right margin to use in printed messages.
        
        
        PRINTRESET <printstring>
        
            This keyword defines the command string sent to your printer to
            reset it after printing.
        
              <printstring>  See the PRINTINIT keyword.
        
        
        QUOTEBLANK <yes/no>  (no)
        
            If enabled, GoldED will put the QUOTESTRING on blank lines in the
            quote. Otherwise blank lines are left blank in quotes.
        
        
        QUOTEBUFFILE <filename>
        
            If used, it sets the default filename for the quotebuffer. If no
            path is specified, the GOLDPATH is used.
        
            This keyword can be used globally and in Random System groups.
        
            NOTE: If this keyword is used in globally (in GOLDED.CFG), it
            effectively disables the automatically named quotebuffers, as
            described in the chapter about the QUOTEBUFMODE keyword.
        
        
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 71
                                                                              
        QUOTEBUFMODE <ask/append/overwrite>  (ask)
        
            Specifies what GoldED should do, if the quotebuffer file exists
            already.
        
              Ask         A menu asks you to select append/overwrite/skip.
              Append      Always append, no asking.
              Overwrite   Always overwrite, no asking.
        
            The "always overwrite" mode is not very useful I guess, but it's
            there if you need it.
        
            The quotebuffer feature automatically creates special filenames
            for the buffer file, using these guidelines:
        
              FORMAT    FILENAME      LOCATION
              Fido      GOLDED.QBF    In the directory with the *.MSG's.
              Hudson    GOLDHxxx.QBF  In the HUDSONPATH.
              Squish    filename.QBF  Where the Squish area is.
              Ezycom    GLDxxxxx.QBF  In the EZYCOMMSGPATH.
              JAM       filename.QBF  Where the JAM area is.
              Goldbase  GOLDGxxx.QBF  In the GOLDBASEPATH.
              PCBoard   filename.QBF  Where the PCBoard area is.
        
            Note that they all have extension .QBF so that you can easily find
            them.
        
        
        QUOTECHARS ["]<chars>["]
        
            Defines up to 10 chars to recognize in addition to '>' as quote
            string chars. This is most useful in gated Internet newsgroups,
            where chars such as '|', ':' and ';' are sometimes used instead of
            the '>'.
        
            This keyword can be used globally and in Random System groups.
        
            Example:
        
              Group Internet:
                Member alt.*, comp.*, net.email
                Quotechars "|:;"
                Username odinn@winboss.dk
              EndGroup
        
            The example is similar to the one I use myself (net.email is a
            local netmail area where I import my gated e-mail from
            winboss.dk). The username is my actual Internet address.
        
            Note that using additional quotechars such as '|' and ':' may
            cause odd results when quoting in the cases when they are actually
            NOT used in a message as quotechars. Consider for example quoting
            a smiley :-)
        
        
        QUOTECTRL <Tearline,Origin,yes/no>
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 72
                                                                              
        
            Specifies if you want quote tearline and/or origin in your
            messages.
        
            This keyword can be used in random system groups.
        
        
        QUOTEMARGIN <chars>  (70)
        
            The margin to which quotes are wrapped. A negative value means
            that the negative value is added to the DISPMARGIN (not
            recommended).
        
        
        QUOTESPACING <yes/no>  (no)
        
            If enabled, GoldED will automatically add blank lines before and
            after a block of quoted text, if none are present already. This
            improves the readability of some messages.
        
        
        QUOTESTRING <quotespec>  (" FL> ")
        
            With this keyword you define how you want the quotestring to look
            in your quoted replies.
        
            The <quotespec> can contain these characters:
        
              F       Replaced with the first letter of the first name.
              M       Replaced with the letters of the middle names.
              L       Replaced with the first letter of the last name.
              >       Required quote-char.
              Spaces  Cosmetics.
        
            Other characters are allowed but *not* recommended.
        
            This keyword can be used globally and in Random System Groups.
        
        
        QUOTEWRAPHARD <yes/no>  (yes)
        
            This keyword controls behaviour of quoted text (wrap or reflow).
        
        
        QWKBADMSGS <echoid>
        
            Specifies the area where messages in unknown conferences are put.
            If you get messages tossed here by accident, you must move them
            manually to the correct area. If the badmsgs area is not defined,
            the messages will silently disappear. Messages tossed to the
            badmsgs area will have the control line "AREA:<bbsid>_<confno>" at
            the top of the message.
        
        
        QWKCONFMAP <bbsid> ["]<confname>["] <echoid>
        
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 73
                                                                              
            Defines the mapping between the BBSID and conference names in the
            QWK packets and the echoid name of the conference as required by
            GoldED. You MUST define a mapping for every conference that you
            subscribe to. If you don't, the messages will be tossed to the
            area defined by QWKBADMSGS or disappear. The <bbsid> is the name
            listed on line 5 in CONTROL.DAT after the comma. The <confname> is
            the conference names listed on line 13 and on alternate lines
            onwards in CONTROL.DAT. If a conference name contains embedded
            spaces, the <confname> must be enclosed in double quotes, like
            this: "Main Board". The area <echoid> must be already defined
            either in an AREAFILE or using the AREADEF or AREA keywords.
        
        
        QWKEXPORTPATH <path>
        
            Path where outgoing QWK reply files (BBSID.MSG) can be placed.
        
        
        QWKIMPORTPATH <path>
        
            Path where incoming QWK packet files (CONTROL.DAT and
            MESSAGES.DAT) can be found.
        
        
        QWKOPTIONS <bbsid> <options>
        
            The <bbsid> is the BBSID (same as the name of the QWK packet) for
            which the options will be active. The <options> can be any or a
            combination of the following, separated by commas or spaces:
        
            KLUDGES/NOKLUDGES: Defaults to NOKLUDGES. Specifies whether or not
            to include the FidoNet-style kludges at the top of messages when
            exporting to QWK. NOTE: Unless you enable this option, GoldED will
            *not* include kludges in your QWK packets. You should check if the
            BBS supports kludges in QWK packets. If it does, please enable
            this option.
        
            MIXCASE/NOMIXCASE: Defaults to NOMIXCASE. Specifies whether or not
            the BBS allows mixed upper/lower case in the QWK message headers.
            The default is to uppercase the TO and FROM header fields when
            exporting to QWK packets.
        
            RECEIPT/NORECEIPT: Defaults to NORECEIPT. Specifies whether or not
            the BBS supports return receipt requests (RRQ). If the RECEIPT
            option is enabled, GoldED will insert "RRR" at the front of the
            subject field if the RRQ attribute is set on your messages, when
            exporting to QWK packets.
        
        
        QWKREPLYLINKER <cmd>
        
            Commandline for a replylinker program to call after QWK import.
        
        
        QWKTOSSLOG <file>
        
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 74
                                                                              
            Name of a file where GoldED puts the echoids of each area where
            articles have been imported. The tosslog file is intended to be
            used with a replylinker. If no path is given, it defaults to the
            GOLDPATH.
        
        
        RA2USERSBBS <yes/no>  (detect)
        
            GoldED supports the two different formats of the Hudson USERS.BBS
            file. With this keyword you can tell GoldED which format to use.
        
            If set to YES, the RA2 format is used. Otherwise if the it is set
            to NO, the Hudson format is used.
        
            If this keyword is NOT used, GoldED tries to detect the format by
            looking at the size of the USERS.BBS file and comparing this to
            the record sizes of the RA2 and Hudson formats.
        
            If the size matches one and not the other, the format is detected
            to be of the matching type.
        
            If the size matches both (which is quite normal), GoldED looks for
            the RA environment variable and if found, in the RA config files
            for the RA version.
        
            If the size does not match either of them (indicating a possibly
            damaged userfile), GoldED exits with an error message and writes
            in the log with details of the problem and an advise to run a
            userbase packing utility.
        
            If used, this keyword should be placed in the configuration file
            _after_ any AREAFILE keyword.
        
        
        RCVDISABLESCFM <yes/no>  (yes)
         
            If this keyword defined to "no" then GoldEd will recognize RRq
            (receipt request) and/or CFM (confirmation) flag on messages with
            RCV (received) flag set. After that RRq and CFM flags will be
            resetted. It is useful if your netmail tracker sets RCV flag
            before you actually read messages.
        
        
        REGISTERKEY
        REGISTERNAME
        
            These keywords do nothing and won't do anything in the future.
            They were used when GoldED was a Shareware product.
        
        
        REM
        
            This keyword ignores everything behind it. This is useful to
            comment a single line out.
        
        
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 75
                                                                              
        REPLYLINK <chain/direct>
        
            Defaults to "direct" for JAM and "chain" for everything else.
        
            If set to "direct", GoldED will link your reply directly to the
            original message. If set to "chain", it will link to the last
            message in the reply chain. The default ("chain") is how GoldED
            has done it in all previous versions.
        
            The advantage of the "direct" linking method is that you can
            easily find the the original message the reply was for. Unless of
            course you have later re-linked using a chain-linking replylinker
            utility. I can recommend the utility SQLINK by Serge Terekhov.
            SQLINK links Squish areas using the MSGID/REPLY kludges and makes
            direct links instead of chain-linking on the subject line like
            most other replylinkers do. There are probably also similar
            replylinkers for other msgbase formats, I just don't know them.
        
        
        REPLYLINKLIST <fast/full>  (fast)
        
            When there is more than one reply to a msg in a JAM or Squish
            area, GoldED pops up a list of the replies. This keyword affects
            the contents of the list.
        
            In the "fast" mode, the list data is based solely on what can be
            found by reading the message header, which is quite fast.
            Unfortunately some software does not (or cannot) fill the header
            with the correct origination address. In that case, set this
            keyword to "full", which makes GoldED read and scan each message
            for control data to get the origination address. That can be very
            slow.
        
        
        ROBOTNAME <name>
        
            A "robot" is a program on the Boss or Uplink system which responds
            automatically to netmail messages. Usually the robot links or
            unlinks echomail areas or distributed files.
        
            The following ROBOTNAME's are defined by default:
        
              AreaFix, AreaMgr, FileFix, AreaLink, AllFix, Raid, GEcho.
        
            If you write a netmail message where the TO: name is one of the
            robot names, GoldED will ignore any template definition, and give
            you a blank msg (possibly with a tearline) to edit.
        
        
        SCREENBLANKER <seconds> [BLACK]  (180)
        
            If non-zero, GoldED will blank the screen after the defined number
            of seconds, and put a small moving window up instead. Hitting any
            key (including shiftkeys) will return the screen to normal. If
            zero, no blanking is done.
        
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 76
                                                                              
            If the additional parameter "BLACK" is given, GoldED will switch
            the screen completely black instead of showing its own animated
            screenblanker. This is useful if you have a monitor with
            powersaving-features.
        
            Example:
        
              SCREENBLANKER 300 BLACK
        
            NOTE: This feature only works if KEYBMODE is set to "poll".
        
        
        SCREENMAXCOL <columns>  (0)
        
            On some systems, GoldED may no detect the correct display size.
            With this keyword you can force a specific size. If zero,
            autodetect is used.
        
        
        SCREENMAXROW <rows>  (0)
        
            On some systems, GoldED may not detect the correct display size.
            With this keyword you can force a specific size. If zero,
            autodetect is used.
        
        
        SCREENPALETTE <reg> <value>  OR  <reg> (red green blue)
        
            You can change the color palette used in GoldED. The palette has
            16 color registers, corresponding to the 16 colors from black (0)
            to intense white (15). By changing the values in the palette
            registers, it is possible to make any of the 16 colors a
            completely different color. You can even make the background
            colors intense, without using the intense color feature. There are
            64 different colors to chose from.
        
            To configure the palette colors in GoldED, the SCREENPALETTE
            keyword is used. There are two different syntaxes:
        
              SCREENPALETTE <reg> <value>
              SCREENPALETTE <reg> (red green blue)
        
            So you can either compose the color value using separate red,
            green, blue components, or directly use a precalculated value. The
            red/green/blue values can only be in the range 0-3.
        
            These are the original palette values:
        
              SCREENPALETTE    0   (0 0 0)
              SCREENPALETTE    1   (0 0 2)
              SCREENPALETTE    2   (0 2 0)
              SCREENPALETTE    3   (0 2 2)
              SCREENPALETTE    4   (2 0 0)
              SCREENPALETTE    5   (2 0 2)
              SCREENPALETTE    6   (2 2 0)
              SCREENPALETTE    7   (2 2 2)
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 77
                                                                              
              SCREENPALETTE    8   (1 1 1)
              SCREENPALETTE    9   (1 1 3)
              SCREENPALETTE   10   (1 3 1)
              SCREENPALETTE   11   (1 3 3)
              SCREENPALETTE   12   (3 1 1)
              SCREENPALETTE   13   (3 1 3)
              SCREENPALETTE   14   (3 3 0)
              SCREENPALETTE   15   (3 3 3)
        
            Copy these lines into your GOLDED.CFG and start experimenting! :-)
        
            If you have written a program to edit the palette and write a
            GoldED palette setup file, please don't keep it a secret! :-)
        
        
        SCREENSHADOWS <yes/no>  (yes)
        
            If enabled, all relevant windows and menus in GoldED will have
            shadows.
        
        
        SCREENSIZE <mode>  (Auto)
        
            Use this to force GoldED to use either 25 lines, 43/50 lines on
            EGA/VGA, or even special videomodes supported by your SuperVGA
            adapter (modes like 132x44, 100x40 or 80x60).
        
            The <mode> can be one of the following:
        
              Auto        Use detected size.
              25          Switch to 25 lines.
              28          Switch to 28 lines.
              4350        Switch to 43/50 lines.
              Mode <NN>   Switch to videomode NN (a hexadecimal value).
        
            Please check your video adapter manual carefully before trying out
            the Mode option. SELECTING A WRONG MODE CAN DAMAGE YOUR MONITOR!!!
        
            The Mode option is ignored in the W32 and OS/2 version.
        
        
        SCREENUSEBIOS <yes/no>  (no)
        
            If enabled, GoldED will use standard BIOS calls for screen
            updates. This is VERY slow, and should only be used if really
            needed. Normally GoldED uses direct screen writes.
        
            This feature is only interpreted in the DOS version.
        
        
        SEARCHFOR ["]<string|string|..>["]
        
            Defines a set of search strings, separated by the '|' character.
            The search set defined here is the default when using the Alt-F/Z
            search functions or the marking system.
        
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 78
                                                                              
            The '|' character works like an OR operator. That is, the search
            is successful if one OR more of the strings are matched.  The '&'
            character is used as the logical AND operator.
        
            Please refer to appropriate section in user's guide for more
            information.
        
            Older versions used the ';' semicolon character as a separator,
            but that conflicts with the config reader which treats the
            semicolon in a special way. The semicolon is still accepted as
            separator char like '|', but if semicolons are used, you MUST
            enclose the search strings with quotes or the config reader will
            treat the first semicolon as the start of a comment.
        
            Examples:
        
              SEARCHFOR string1
              SEARCHFOR string1|string2|stringx
              SEARCHFOR "string1;string2;stringx"
              SEARCHFOR "string 1"|string2&stringx
        
            This keyword can be used globally and in Random System groups.
        
        
        SEMAPHORE <type> <file>
        
            This keyword defines "semaphore" files, for use with other mailer
            and/or mail processing software.
        
            The <type> can be one of the following:
        
              NETSCAN     Empty netmail scan file (for D'Bridge/FD).
              ECHOSCAN    Empty echomail scan file (for D'Bridge).
              EXPORTLIST  Echoid-list of your new messages.
              IMPORTLIST  Echoid-list of new imported messages.
        
            The semaphore files are placed in the AREAPATH, if no path is
            specified.
        
            See the example .CFG files for typical semaphore filenames.
        
            NOTE: You should not set SEMAPHORE EXPORTLIST to
            %JAMPATH%\ECHOMAIL.JAM. This is incorrect and probably may cause
            your mail processor to malfunction. Use the JAMPATH keyword
            instead.
        
            GoldED can handle enviroment variables correctly in paths
            specified in connection with this keyword. For example, if a path
            is defined as %MAIL%\path\name, and SET MAIL=C:\POINT is in
            AUTOEXEC.BAT (or whatever), then GoldED translates the path to
            C:\POINT\path\name.
        
            NOTE: The translation is done at config compile time, so if you
            change the environment variable and haven't changed anything else
            that would cause GoldED to recompile it's config, you must force
            it with the -F or -FF command parameter.
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 79
                                                                              
        
            In addition, GoldED itself can watch for some semaphore files and
            execute the appropiate function if it is in the arealist screen.
            This can be useful if you have a multitasking system and you want
            to "tell" GoldED that there is new mail in some areas and GoldED
            should update its display correctly.
        
            In detail, there are
        
              EXITNOW <file>          Quit immediately.
              SCANALL <file>          Scan all areas
              SCANNETMAIL <file>      Scan all netmail areas
              SCANTHIS <file>         Scan the areas listed in the file
              PMSCANALL <file>        PM-scan all areas
              PMSCANNETMAIL <file>    PM-scan all netmail areas
              PMSCANTHIS <file>       PM-scan the areas listed in the file
              QWKIMPORT <file>        Import QWK packets
              QWKEXPORT <file>        Export to QWK
              SOUPIMPORT <file>       Import SOUP packets
              SOUPEXPORT <file>       Export to SOUP
              IDLETIME <seconds>      Number of seconds between checks
        
            If SEMAPHORE IDLETIME is defined and non-zero, then GoldED will
            check this list of semaphore files when the user has not pressed a
            key in the specified number of seconds. The semaphores are only
            checked when the arealist screen is active. If a semaphore file is
            found, the file is deleted and then the action is performed. If no
            path is given for the files, the GOLDPATH is assumed.
        
            Example:
        
              SEMAPHORE SCANALL SCANALL.NOW
              SEMAPHORE IDLETIME 30
        
            This causes GoldED to check every 30 seconds for the SCANALL.NOW
            file in the GOLDPATH, and scan all areas if it's found.
        
        
        SERIALNO
        
            Everything mentioned above about REGISTERKEY and REGISTERNAME
            applied to this keyword.
        
        
        SHAREMODE <yes/no/mode#>  (yes)
        
            If enabled, GoldED opens all files in a SHARE.EXE compatible mode.
        
            The default share-mode is "Share Deny None", but another may be
            specified directly if you give the mode number as the keyword
            parameter (decimal).
        
            It is normally not necessary to change the default.
        
        
        SOUNDPATH <path>  (defaults to the GOLDPATH)
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 80
                                                                              
        
            Tells GoldED where to find the sound files for the PLAY and EVENT
            keywords.
        
        
        SOUPBADMSGS <echoid>
        
            Specifies the area where "bad messages" from SOUP packets can be
            tossed. It should be an echomail or newsgroup area.
        
        
        SOUPEMAIL <echoid>
        
            Specifies the area where Internet e-mails can be tossed. It must
            be a netmail or e-mail area.
        
        
        SOUPEXPORTMARGIN <margin>  (76)
        
            This is the margin that GoldED will hard-wrap to when exporting to
            SOUP packets. If you're getting complaints that your lines are too
            long, you may want to set this to 70 or 60.
        
            NOTE: You should NOT enable EDITHARDTERM in email and newsgroups
            that are exported to SOUP. If you do, your messages will probably
            be exported with short line "droppings" after the wrapping margin.
        
        
        SOUPEXPORTPATH <path>
        
            Path where outgoing SOUP reply packet files (REPLIES and
            GOLD*.MSG) can be placed.
        
        
        SOUPIMPORTPATH <path>
        
            Path where the incoming SOUP packet files (AREAS and *.MSG) can be
            found.
        
        
        SOUPNEWSRCFILE <file>
        
            Name with full path of the NEWSRC file which lists the newsgroups
            you are connected to. GoldED uses the list to mark the matching
            areas as newsgroups. These will then be scanned for outgoing mail
            when starting a SOUP export.
        
        
        SOUPREPLYLINKER <cmd>
        
            Commandline for a replylinker program to call after SOUP import.
        
        
        SOUPREPLYTO <internet-address>
        
            Internet-Address other users should use when they respond to your
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 81
                                                                              
            mails (Reply-To Headerline).
        
        
        SOUPTOSSLOG <file>
        
            Name of a file where GoldED puts the echoids (newsgroup names) of
            each area where articles have been imported. The tosslog file is
            intended to be used with a replylinker. If no path is given, it
            defaults to the GOLDPATH.
        
        
        SQUISHDIRECT <yes/no>  (no)
        
            If enabled, then in Squish areas, if the DIR (direct) attribute is
            set on a message, GoldED will automatically set both the CRA
            (crash) and HLD (hold) attributes when saving the message.
        
            According to the Squish Developers Kit, this is the way to tell
            SquishMail that a message should be routed direct, because
            SquishMail does not recognize the FLAGS kludge where the DIR
            attribute is normally found. This keyword should probably only be
            used with SquishMail (the mail processor) and then only when used
            with Binkley or other so-called "static" mailers. DON'T use it
            with FrontDoor!
        
        
        SQUISHSCAN <api/quick>  (quick)
        
            Specfies whether to use a quick scanning method which only looks
            in the .SQI files. This will normally work fine, but may fail
            slightly in obscure cases, especially when used with Squish 1.0x
            or programs using the old version of the MSGAPI. If you suspect
            problems, try to set this keyword to "api", which tells GoldED to
            look in the .SQD file for an exact count of active msgs in the
            .SQI file.
        
            NOTE: GoldED does NOT use the original MSGAPI by Scott Dudley.
            Since version 2.50, a completely rewritten implementation is used.
        
        
        SQUISHUSERNO <index>  (0)
        
            This sets the lastread index number for the Squish *.SQL lastread
            files. Lowest number is 0 (zero), highest is (in theory) 65534.
        
            If used, this disables the use of USER.BBS to find the index
            number, and will in effect also stop GoldED from creating USER.BBS
            or any new entries in it (useful in a single-user point system).
            If a Squish msgbase is shared between several users, and you don't
            want to have a USER.BBS (recommended in such a case), each user
            must have a unique SQUISHUSERNO in their GOLDED/GOLDAREA.CFG.
        
        
        SQUISHUSERPATH <path>[file]
        
            This keyword defines the path where GoldED can find and use/create
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 82
                                                                              
            your USER.BBS file, which is used in connection with the Squish
            area lastreads. You can also specify the exact filename if not
            USER.BBS.
        
            If this path or filename is not defined, GoldED will instead take
            the one specified with AREAFILE Squish or AREAFILE Maximus
            (whichever comes first), or failing that, use the MAXIMUS or
            SQUISH environment variables. If even that fails, the AREAPATH or
            GOLDPATH is used. If AREAFILE Maximus is used, GoldED gets the
            filename from MAX.PRM.
        
        
        STATUSLINECLOCK <yes/no>  (yes)
        
            If enabled, GoldED will display a clock in HH:MM:SS format in the
            right side of the statusline.
        
            You can redefine the clock format with the language keyword
            ST_STATUSLINETIMEFMT in GOLDLANG.CFG. See the Language Definition
            chapter to details about the date/time codes you can use.
        
            NOTE: The clock will only run continuously if KEYBMODE is set to
            "poll".
        
        
        STATUSLINEHELP <yes/no/nologo>  (no)
        
            If set to YES, GoldED will replace the "logo" in the left side of
            the statusline with a text saying "F1 Help". This is for use in
            "point package" setups where the user may be a complete novice,
            maybe even to computers, and who needs to be guided to the help
            screens. The "F1 Help" text is configurable with the
            ST_STATUSLINEHELP language keyword (put it in GOLDLANG.CFG).
        
            If set to NO, GoldED will display it's logo (name and version) in
            the left side of the statusline.
        
            If set to NOLOGO, GoldED will not display anything in the left
            side. The middle part is extended to fill the space on the left
            side.
        
        
        STYLECODES <yes/hide/no>  (hide)
        
            If enabled (yes or hide), GoldED will highlight text surrounded by
            one of the following characters in a different color: '*' for bold
            text, '/' for italic text, '_' for underlined text and '#' for
            reversed text. These are commonly used "stylecodes" which add
            emphasis to the text, without making it harder to read. Examples:
            *This* will be shown in bold color, /this/ in italic color and
            _this_ in underlined color. It is also possible to combine styles,
            such as */this/*, in bolditalic color.
        
            The differ in yes and hide is that hide strips surrounding
            stylecodes.
        
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 83
                                                                              
            To define the highlight colors, use COLOR STYLECODE. See the color
            chapter for details.
        
        
        STYLECODEPUNCT <"charlist">  (" !\"$%&()+,.:;<=>@[\]^`{|}~")
        STYLECODESTOPS <"charlist">  ("")
        
            The STYLECODEPUNCT keyword specifies all the characters that
            punctuates words. The stylecode line parser scans forward until it
            meets one of these characters and then looks back to see if it
            found a word with stylecodes around it.
        
            The STYLECODESTOPS keyword specifies characters which, if found
            within the word to be highlighted, causes the highlight to be
            cancelled.
        
            These keywords were added to allow users to experiment with the
            characters for punctuation and stop for stylecode sequences. This
            is mostly to illustrate the point that it is almost impossible to
            make stylecodes work in every case you want without getting a lot
            of false highlights too. Please keep in mind that stylecodes are,
            and always will be, a primitive and very error-prone method for
            adding highlights to message text. The defaults are:
        
              STYLECODEPUNCT " !\"$%&()+,.:;<=>@[\]^`{|}~"
              STYLECODESTOPS  ""
        
            Note that the double-quote (") must have the backslash (\) in
            front of it - the sequence (\") is translated to a single (").
        
        
        SWAPPATH <path>  (defaults to TEMPPATH)
        
            Defines where the swap file will be placed in case of disk
            swapping in DOS shells. It is recommended that this points to a
            RAM disk, if available. GoldED needs 3-500k free disk space for
            the swapfile, depending on the overlay buffer size specified with
            the -O commandline switch.
        
            This keyword is only interpreted by the DOS platform version.
        
        
        TAGLINE <string or filename>
        
            Defines one or more taglines. A tagline collection filename can be
            specified if prepended with an '@' character, like this: TAGLINE
            @TAGLINE.LST. If a tagline collection file is used, GoldED will
            create an index file for it the first time it is used or any time
            the file is edited. The index file has the same name, but
            extension ".SDX". The index file is an array of 32-bit long
            integers, containing the offset of each line in the tagline
            collection file.
        
            This keyword can be used globally and in a Random System group.
        
            Taglines defined in the Random System *always* overrides the
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 84
                                                                              
            default global taglines defined with this keyword.
        
        
        TAGLINECHAR <char>  ('.')
        
            Defines the character GoldED uses when putting a tagline in your
            message. The default is '.'. You should not change this default.
            GoldED itself only recognizes taglines with '.' or '_'
            (underscore).
        
        
        TAGLINESUPPORT <yes/no>  (yes)
        
            Allows you to turn off the internal tagline support, in case it
            turns out to be too buggy or if you want to use one of the many
            good external tagline utilties out there instead.
        
        
        TASKTITLE <string>  (@longpid)
        
            Sets window title in Win32 and OS/2 versions, ignored in other.
        
        
        TEARLINE <string>  (@longpid @version)
        
            Here you can define your default tearline. The tearline can be up
            to 76 chars long (excluding the leading "--- "), but beware that
            policies (such as FidoNet ECHOPOL1) may set a significantly lower
            limit (around 30).
        
            This keyword can be used globally and in a Random System group.
        
            Tearlines defined in the Random System *always* overrides the
            default tearline defined with this keyword.
        
            If your tearline does not contain at least the string "GoldED" or
            "GED", GoldED will automatically insert it's PID kludge. See also
            description of USEPID keyword.
        
        
        TEMPLATE <file> ["desc"] [match-address]  (GOLDED.TPL)
        
            You can define many different template files. The templates can be
            switched using the READchangetemplate (Ctrl-T) popup menu or the
            EDITMENU.
        
            The optional "desc" can be used to give the templates more
            meaningful names like "International template" instead of
            non-obvious names like "GOLDED.TPL". If a description is used, it
            must appear before the match-address. It must always be enclosed
            in quotes, even if it is only one word.
        
            The match-address is an address mask (wildcards allowed) which can
            be used to tell GoldED to select that template if the destination
            address on a message you write matches the match-address. The
            matching will only take place if the TEMPLATEMATCH keyword has
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 85
                                                                              
            been enabled.
        
            This keyword can be used globally and in a Random System group. In
            Random System groups, only the <file> parameter can be used.
        
            Templates defined in Random System groups always override the
            globally defined templates, except when selected from the EDITMENU
            or when automatic template matching is in effect.
        
            To override the automatic template matching, start by selecting a
            template manually using the READchangetemplate (Ctrl-T) command or
            the EDITMENU.
        
            Currently only one match-address per template can be specified,
            but you can specify several TEMPLATE keywords for the same file.
        
            Example:
        
              // Use DANSK.TPL for messages to Danish nodes/points.
              TEMPLATE DANSK.TPL "Danish" 2:23/*
              TEMPLATE DANSK.TPL "Danish" 2:234/*
              TEMPLATE DANSK.TPL "Danish" 2:235/*
              TEMPLATE DANSK.TPL "Danish" 2:236/*
              TEMPLATE DANSK.TPL "Danish" 2:237/*
              TEMPLATE DANSK.TPL "Danish" 2:238/*
        
              // Use INTERNET.TPL for messages to the WinBoss gateway
              TEMPLATE INTERNET.TPL "Internet" 2:230/9316
        
              // Use ENGLISH.TPL for messages to everywhere else
              TEMPLATE ENGLISH.TPL "English" *
        
        
        TEMPLATEMATCH <yes/no>  (no)
        
            If enabled, GoldED will select a template which matches the
            destination address on messages that you write. This keyword can
            be used globally or in random system groups.
        
        
        TEMPLATEPATH <path>  (defaults to the GOLDPATH)
        
            Defines the default path for msg templates. Use this if you want
            to place templates in a path separate from the GOLDPATH.
        
        
        TEMPPATH <path>
        
            Defines the directory where temporary files are placed by GoldED
            and GoldNODE.
        
            This path should *NOT* point to a RAM disk or other volatile
            media!
        
            GoldNODE uses this path to store a temporary file which can become
            as large as the largest index file (GOLDNODE.GXN), so again, don't
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 86
                                                                              
            point it to a small RAM disk. If GoldNODE cannot find a TEMPPATH,
            it will use the NODEPATH instead.
        
        
        TIMEOUT <seconds>  (0)
        
            Similar to the screen blanking (SCREENBLANKER) feature, GoldED can
            auto-exit after a specified period of time. Useful if you are in a
            hurry (or didn't get enough sleep last night ;-), and run GoldED
            from your mailer shell. The timeout value can be overridden with
            the -T commandline option.
        
            NOTE: This feature only works if KEYBMODE is set to "poll".
        
        
        TIMEOUTSAVEMSG <yes/no>  (yes)
        
            If set to YES, GoldED behaves as usual: It saves the (perhaps
            partially written) msg text in the internal editor to the msgbase
            and exits. If set to NO, GoldED will save the msg text in
            GOLDED.MSG just as if EDITAUTOSAVE function was in use and the
            power went out. Next time you started GoldED and entered a msg, it
            would detect the "lost" msg and ask you if it should be continued.
        
        
        +TITLESTATUS <yes/no>  (yes)
        
            If enabled then brief status will be added to title. (Win32 and
            OS/2 versions only)
        
        
        TWITMODE <mode>  (Blank)
        
            In GoldED you can define several "Twit" names, addresses or
            subjects. With this keyword you can specify the action taken when
            a Twit message is encountered.
        
            The <mode> can be one of the following:
        
              Show    Show twit messages.
              Blank   Blank twit messages.
              Skip    Skip twit messages, unless to your USERNAME's.
              Ignore  Skip twit messages, always.
              Kill    Deletes twit messages, *without* confirmation!
        
            This keyword can be used globally and in a Random System group.
        
        
        TWITNAME <name/address>
        
            With this keyword, you can specify "Twit" names and/or addresses.
            When a Twit name/address is detected, the TWITMODE setting will
            determine the action taken.
        
        
        TWITSUBJ <"string">
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 87
                                                                              
        
            With this keyword, you can specify "Twit" subjects. When a Twit
            subject is detected, the TWITMODE setting will determine the
            action taken. The subject string is searched in the entire subject
            text, so you can specify a partial twit subject. Twit subjects are
            limited to maximum 35 characters.
        
        
        TWITTO <yes/no>  (no)
        
            If enabled, GoldED will check both from- and to-names when
            checking for twitnames. By default only the from-names are
            checked.
        
            This is a global keyword and won't work as intended if used in a
            random system group.
        
        
        USECHARSET <yes/no>  (yes)
        
            If set to no then GoldEd will not generate @CHRS and @CHARSET
            kludges.
        
        
        USEFLAGS <yes/no>  (yes)
        
            If enabled, GoldED inserts the FLAGS kludge for certain extended
            attributes, as defined in FSC-0053 by Joaquim H. Homrighausen, and
            supported by FrontDoor, D'Bridge, IMail and other modern software.
            GoldED uses FLAGS to emulate the Hold and Freq attributes which
            are not defined in the Hudson message format.
        
        
        USEFWD <yes/no/ask>  (yes)
        
            If enabled, GoldED inserts the FSC-0092 kludges introduced by the
            author of FleetStreet, Michael Hohner. These are
        
              FWDFROM   The original From-Name
              FWDORIG   The original From-Aka
              FWDTO     The original TO-Field
              FWDDEST   The original TO-aka (only in netmails)
              FWDSUBJ   The original subject
              FWDAREA   The original areatag
              FWDMSGID  The original MSGID (useful for reply-linking)
        
            When forwarding, GoldED now adds these kludges, unless the
            original message already contains them, in which case they are
            preserved. When doing a normal reply (Alt-Q or Alt-R) to a message
            with the FWD kludges, GoldED replies to the forwarder. To reply to
            the from-name in the forwarded message, use the comment-reply
            function (Alt-G). If the message contains the FWDAREA kludge, you
            can reply to the forwarder in the original area (Alt-N) or reply
            to the from-name in the original area (Alt-B). Note that it is not
            possible to reply to the to-name of a message with the FWD
            kludges, and it is also not possible to reply to the to-name of
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 88
                                                                              
            the forwarded message (the FWDTO name).
        
        
        USEINTL <type>  (yes)
        
            The INTL kludge is normally only inserted in netmail messages, if
            the origination zone is different from the destination zone (the
            "Auto" setting), but on systems with many AKA's in the mailer, it
            might be useful/necessary to add it ALWAYS (the "Yes" setting).
            The "No" option should never be used.
        
            The <type> can be one of the following:
        
              Auto  Only insert in inter-zone netmail.
              Yes   Always insert. Recommended and default.
              No    Never insert.
        
        
        USEMSGID <yes/no>  (yes)
        
            If enabled, the MSGID kludge is inserted in netmail and echomail,
            and the REPLY kludge is inserted when replying to a msg with a
            MSGID.
        
            The MSGID kludge is defined in FidoNet document FTS-9.
        
        
        USEPID <yes/no>  (no if GoldEd mentioned in tearline, yes otherwise)
        
            If disabled then @PID kludge will not be used in your messages
            regardless of tearline contents.
        
        
        USERLIST <file> [zone/addr]
        
            In addition to normal nodelist support, GoldED also supports the
            "FIDOUSER.LST" style userlist format. The default zone is defined
            by the first ADDRESS or AKA, but can be overridden by adding the
            zone number or a full address after the filename.
        
              <file>        Userlist file in FIDOUSER.LST format.
              [zone/addr]   Default address for the userlist (if no zone info
                            is present).
        
        
        
        USERLISTFILE <file>  (GOLDED.LST)
        
            GoldED can generate a list of all users in the current area. This
            keyword defines the default name of the FIDOUSER.LST style
            userlist output file generated with the READmakeuserlist command.
        
        
        USERNAME <name>[[,]< >address]
        
            You can define many different names/aliases. When GoldED finds an
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 89
                                                                              
            un-received message to one of your USERNAME's, it is marked as
            received. Useful if you use alias names in some conferences. It is
            possible to change the current name using the READchangeusername
            popup menu.
        
            For msgbase formats with an associated user database, GoldED uses
            the *first* defined USERNAME to look in the user database for
            which lastread record to use. If your name is not found, it is
            added and a new lastread record created.
        
            Example:
        
              USERNAME Odinn Sorensen, 2:236/77.999
        
            This keyword can be used globally and in a Random System group.
        
        
        USETZUTC <yes/no>  (no)
        
            Activates usage of TZUTC kludge in your messages. You should
            properly setup timezone information in your OS. For example,
            in DOS you should set environment variable TZ to something
            like this:
        
              TZ=MSK-3MSD,M3.5.0/02:00,M10.5.0/03:00
        
            This line valid for Moscow, Russia.
        
            This option could be used in random system groups.
        
        
        UUDECODEPATH <path>
        
            Specifies the path where files are placed when using the uudecode
            feature. Files are placed in current directory if a path is not
            specified.
        
            The specified path *must* exist !
        
        
        VIEWHIDDEN <yes/no>  (no)
        
            Hidden lines are "unknown" kludge lines. If enabled, hidden lines
            will be displayed (in a different color) when reading msgs.
        
            A hidden line is defined as a line which has the FidoNet kludge
            char (^a, ASCII 1) as the first char and is not on the list of
            internally or user defined known kludges.
        
            This keyword can be used globally and in a Random System group.
        
            IMPORTANT NOTE:
        
            In some conferences the hidden lines are used to give witty
            comment "between the lines" in the plain text, but generally it is
            considered a bad practice and should be avoided because it may
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 90
                                                                              
            cause severe technical problems if a witty comment in a hidden
            line happens to match a (perhaps experimentally) defined kludge
            somewhere. It should also be noted that hidden lines are not kept
            in their original places when used in the JAM msgbase. This is due
            to the way the JAM specification stores FidoNet kludges.
        
        
        VIEWKLUDGE <yes/no>  (no)
        
            If enabled, known kludge lines will be displayed (in a different
            color) when reading msgs.
        
            Known kludges are those defined internally in GoldED plus those
            defined with the KLUDGE keyword.
        
            This keyword can be used globally and in a Random System group.
        
        
        VIEWQUOTE <yes/no>  (yes)
        
            This is an experimental feature. It is similar to the VIEWHIDDEN
            and VIEWKLUDGE keywords, but for quoted text. I implemented it
            because I was annoyed with the excessive quoting often seen in
            Internet newsgroups. When this keyword is set to NO, GoldED
            attempts to trim down the quotes so that only the first line of
            each quote block is shown. It is not always successful, sometimes
            the result is not so useful.
        
            A key command has been added to supplement this feature:
            READtogglequote. Suggested key assignment: Ctrl-V. Example:
        
              ^V  READtogglequote
        
            Try it out if you are annoyed with excessive quotes.
        
            This keyword can be used globally and in a Random System group.
        
        
        WHOTO <name>
        
            This name is inserted in the TO: name field, when entering new
            messages (not replies) in echomail or local areas.
        
            This keyword can be used globally and in a Random System group.
        
        
        WILDCATUSERNO <userno>
        
            Defines the lastread set used in the WildCat! 4.x message base.
        
        
        XLATCHARSET <importid> <exportid> <file>
        
            This keyword defines character set translation table files.
        
              <importid>    Charset import identifier.
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 91
                                                                              
              <exportid>    Charset export identifier.
              <file>        Charset translation table file.
        
            See the Character Translation chapter for details.
        
        
        XLATESCSET <import> <export> <escfile>
        
            This keyword defines escape sequence translation table files.
        
              <importid>    Escset import identifier.
              <exportid>    Escset export identifier.
              <file>        Escape sequence translation table file.
        
            See the Character Translation chapter for details.
        
        
        XLATEXPORT <charsetid>
        
            Defines the export charset for your messages. See the Character
            Translation chapter for details.
        
            This keyword can be used globally and in a Random System group.
        
            It can also be used in templates (the @xlatexport token).
        
        
        XLATIMPORT <charsetid>  (IBMPC)
        
            Defines the local charset for your machine. See the Character
            Translation chapter for details.
        
            This keyword can be used globally and in a Random System group.
        
        
        XLATLOCALSET <charsetid>  (IBMPC)
        
            Use this keyword to specify the actual physical charset in effect
            for text screen display. This was previously the hardcoded value
            IBMPC, corresponding to the IBM codepage 437 (or the nordic
            edition 865).
        
            NOTE: All charset translation files must translate from and to the
            charset identified with the XLATLOCALSET keyword!
        
        
        XLATPATH <path>
        
            This is the path where GoldED tries to find the XLATCHARSET and
            XLATESCSET files.
        
        
        ZONEGATING <yes/no/ask>  (ask)
        
            When writing a netmail message to a destination in another zone,
            you can either send the message directly (No) or via the local
        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 92
                                                                              
            ZoneGate (Yes). You can also be consulted each time (Ask). GoldED
            won't ask if Cra or Hld attribute is set.
        





















































        ______________________________________________________________________
                                                                              
        Configuration Keyword Reference              GoldED Reference, Page 93
                                                                              
        ______________________________________________________________________
                                                                              
                                   Obsolete Keywords                          
        ______________________________________________________________________
                                                                              
        
        This is a list of keywords which were used in various older versions.
        These keywords are now obsolete, either because they have been renamed
        or replaced, or if they no longer have any function. Most of the
        keywords are still active and remapped to the new names.
        
        To check if you have obsolete keywords in your setup, run GoldED with
        the -F -D commandline parameters. Then if you get a number of "Unknown
        keyword" warnings, you should replace the old keywords with the new
        ones or remove them.
        
          Old keyword:    New keyword:
        
          AREAAUTOFREQ    AREAFREQTO
          AREABADMSGS     SOUPBADMSGS
          AREASORT        AREALISTSORT
          ASSIGNTO        MEMBER
          AUTOATTACH      EDITAUTOATTACH
          BEEPFACTOR      (removed)
          BLANKTIME       SCREENBLANKER
          BOARDNOS        (removed)
          CCATTRIB        ATTRIBSCC
          CCLIST          CARBONCOPYLIST
          CFMATTRIB       ATTRIBSCFM
          CHANGEDATE      EDITCHANGEDATE
          CHANGEPROMPT    (removed)
          CHARSET         XLATCHARSET
          CLEARKEYS       (removed)
          COLOUR          COLOR
          COMMENTNOISE    BEEPCOMMENT
          COOKIEFILE      (removed)
          CRLFTERM        EDITCRLFTERM
          DELORIG         ASKDELORIG
          DISPMSGLIST     MSGLISTFIRST
          DISPMSGLISTFAST MSGLISTFAST
          DISPSTYLECODES  STYLECODES
          ECHOATTRIB      ATTRIBSECHO
          ECHOINFO        CTRLINFOECHO
          EDITMARGIN      (removed)
          EDITORVERSION   (removed)
          ELIMSNOW        (removed)
          ESCSET          XLATESCSET
          EXCLAREA        AREAEXCL
          EXPORTCHARSET   XLATEXPORT
          EXTKEYS         (removed)
          FIDOLASTREADNO  FIDOUSERNO
          FIELDCLEAR      EDITFIELDCLEAR
          FILECHECK       (removed)
          FILECHECKALL    (removed)
          FREEAREA        (removed)
          FREETEAR        (removed)
        ______________________________________________________________________
                                                                              
        Obsolete Keywords                            GoldED Reference, Page 94
                                                                              
          GOLDEDCFM       CONFIRMFILE
          GOLDEDLOG       LOGFILE
          GOLDEDLST       USERLISTFILE
          GOLDEDMSG       EDITORFILE
          GOLDEDNAM       NAMESFILE
          GOLDEDPRN       OUTPUTFILE
          GOLDHELP        (no longer documented)
          GOLDKEYS        (no longer documented)
          GOLDLANG        (no longer documented)
          GOLDRAND        (no longer documented)
          GOLDXLAT        (no longer documented)
          HARDLINE        EDITHARDLINE
          HARDLINES       EDITHARDLINES
          HWMARKS         (removed)
          INCLAREA        AREAINCL
          INTERNALEDITOR  EDITINTERNAL
          LASTREAD        FIDOLASTREAD
          LASTREADUSER    FIDOUSERNO
          LISTWRAP        (removed)
          LOCALATTRIB     ATTRIBSLOCAL
          LOCALCHARSET    XLATIMPORT
          LOCALHIGHLIGHT  (removed)
          LOCALINFO       CTRLINFOLOCAL
          LOCALNOISE      (removed)
          MAPDRIVE        MAPPATH
          MATCHAKA        AKAMATCH
          MAXCOLS         SCREENMAXCOL
          MAXMSGSIZE      EDITMSGSIZE
          MAXROWS         SCREENMAXROW
          MIXCASE         EDITMIXCASE
          MULTIQBBS       (removed)
          NETATTRIB       ATTRIBSNET
          NETINFO         CTRLINFONET
          NETTEAR         CTRLINFONET performs similar function
          NEXTAREA        AREANEXT
          NEXTMSGS        (removed)
          NODELISTPAGEBAR (removed)
          NOISEFACTOR     (removed)
          OVERLAYEMS      OVERLAY performs similar function
          OVERLAYEXT      OVERLAY performs similar function
          PAGEBAR         (removed)
          QBBSINCRESCAN   (removed)
          QBBSPATH        HUDSONPATH
          QBBSREBUILD     (removed)
          QBBSSCAN        (removed)
          QMSGPATH        HUDSONPATH
          REALMSGNO       (removed)
          REBUILD         (removed)
          RENAREA         AREARENAME
          REPLYRE         EDITREPLYRE
          RIGHTMARGIN     DISPMARGIN
          SAVEMENU        EDITSAVEMENU
          SAVETIME        EDITAUTOSAVE
          SAYBIBI         (removed)
          SCANAREA        AREASCAN
          SCREENELIMSNOW  (removed)
        ______________________________________________________________________
                                                                              
        Obsolete Keywords                            GoldED Reference, Page 95
                                                                              
          SCREENUSEANSI   (removed)
          SHADOWS         (removed)
          SHARE           SHAREMODE
          SHOWTWITS       TWITMODE
          SIGNALFILE      SEMAPHORE
          SOUNDDEVICE     (removed)
          SPACEQUOTES     (removed)
          SPELLCHECKER    EDITSPELLCHECK
          STACKKEYS       KEYBSTACK
          STARTECHO       AREASTART
          SWAPALL         DOSSWAP
          SYSOP           USERNAME
          TABSIZE         DISPTABSIZE
          TAGLINEFILE     (removed)
          TIMESLICE       (removed)
          TIMEZONEOFFSET  USETZUTC performs similar function
          UNDELETELINES   EDITUNDELETE
          USEBIOS         SCREENUSEBIOS
          XPLIST          CROSSPOSTLIST
        




































        ______________________________________________________________________
                                                                              
        Obsolete Keywords                            GoldED Reference, Page 96
                                                                              
        ______________________________________________________________________
                                                                              
                       Location Dependent Configuration Keywords              
        ______________________________________________________________________
                                                                              
        
        The following configuration keywords are location dependent and should
        be placed in a particular order in the configuration file(s). Keywords
        that are *not* listed can be placed anywhere you want.
        
        The keywords are listed in groups of those that depend on each other.
        They are listed in the recommended order within each group. The order
        between the groups is not important, with one noted exception.
        
        Name/Address/Areas:
          USERNAME
          ADDRESS
          AKA
          ATTRIBSNET      Specifies default attributes for AREAFILE etc.
          ATTRIBSECHO     As above.
          ATTRIBSLOCAL    As above.
          FIDOMSGTYPE
          PCBOARDPATH     Recommended if you use PCBoard.
          MAPPATH
          AREARENAME      Rename occurs before AREAEXCL/INCL.
          AREAEXCL
          AREAINCL
          AREAISEMAIL
          AREAISNEWS
          AREAPATH        Default path for the AREAFILE's.
          AREAFILE
          RA2USERSBBS     Overrides AREAFILE RemoteAccess.
          AREADESC        Add description and more to some AREAFILE's.
          AREA            Overrides areas in AREAFILE's.
          AREADEF         As above.
        
        Paths:
          GOLDPATH
          TEMPPATH        MUST be in GOLDED.CFG. Used only by GoldNODE.
          SWAPPATH
        
        Nodelists:        MUST be below ADDRESS/AKA and ONLY in GOLDED.CFG!
          NODEPATH
          NODELIST
          USERLIST
          EXCLUDENODES    Remember to replace "ALL" with '*'.
          INCLUDENODES    As above.
        
        Colors:
          INTENSECOLORS   Selects a default intense colorset if enabled.
          COLORSET        Selects a default colorset.
          COLOR
        
        External utils:
          EXTERNOPTIONS
          EXTERNUTIL
        ______________________________________________________________________
                                                                              
        Location Dependent Configuration Keywords    GoldED Reference, Page 97
                                                                              
        
        Character translation:
          XLATPATH
          XLATCHARSET
          XLATESCSET
        
        Random System:
          GROUP           Starts a group.
          MEMBER          Defines areas that are members of the group.
          <Group Items>   See the Random System chapter for a list.
          ENDGROUP        Ends a group.
        












































        ______________________________________________________________________
                                                                              
        Location Dependent Configuration Keywords    GoldED Reference, Page 98
                                                                              
        ______________________________________________________________________
                                                                              
                             Message Attributes Reference                     
        ______________________________________________________________________
                                                                              
        
        This is a list and description of all message attributes that are
        supported by GoldED in the keywords that accept attribute settings or
        can be displayed in the header.
        
        A/S   Archive/sent.
        ARQ   Audit request.
        ATT   File attached.
        CFM   Confirmation receipt requested.
        COV   Fax cover letter.
        CRA   Crash - high priority mail.
        DEL   Deleted.
        DIR   Direct. Don't route this message.
        FAX   Fax image attached.
        FRQ   File request.
        GRP   Group message.
        HIR   Fax hi-resolution image.
        HLD   Hold for pickup.
        HUB   Host- or Hub-route message.
        IMM   Immediate - Send message NOW!
        K/S   Kill/sent. Delete message automatically after it is sent.
        KFS   Kill/file/sent. Delete attached files after they are sent.
        LET   Fax letterhead.
        LOC   Local. Message was written on your system.
        LOK   Lock. Prevents send/delete/purge/editing.
        ORP   Orphan. Could not be sent because destination node is unknown.
        PRN   Msg has been printed. Specific for Squish (bitvalue 00040000h).
        PVT   Private. Message may only be read by the addressee and author.
        R/O   Read only. Used in area definitions to prevent writing.
        RCV   Received. Read by the addressee.
        RRC   Return receipt.
        RRQ   Return receipt requested.
        RSV   FTS-1 reserved (unused) attribute.
        SIG   Fax signature.
        SNT   Sent. Message has been sent or exported from the msgbase.
        TFS   Truncate/file/sent. Truncate files to zero length when sent.
        TRS   Transit. Message passing through, not for you.
        UNS   Unsent message.
        URQ   Update file request.
        XMA   Xmail. Attach does not conform to the ARCmail 0.60 standard.
        ZON   Zonegate. Route through zonegate if possible.
        









        ______________________________________________________________________
                                                                              
        Message Attributes Reference                 GoldED Reference, Page 99
                                                                              
        ______________________________________________________________________
                                                                              
                                  Area Configuration                          
        ______________________________________________________________________
                                                                              
        
        GoldED offers a wide variety of methods for defining message areas.
        You can define each area manually in the GOLDED.CFG file (or an
        INCLUDE'ed GOLDAREA.CFG file), or you can tell GoldED to read the area
        setup files of many popular BBS/mailer/mail processor packages.
        
        For manual definition of areas, use the AREA or AREADEF (recommened)
        keywords.
        
        For external area configuration, the general syntax for the AREAFILE
        keyword is:
        
          AREAFILE <programname> [path or filename(s)] [-options]
        
        Available options:
        
        -NoChk
        
            Normally GoldED will check the areafile timestamps when starting
            up, and recompile the configuration if a file was changed. If this
            option is given for any AREAFILE, those areafiles will not be
            checked. This can be useful in cases like TosScan, GEcho, IMail
            and several others which "touch" their files every time they run.
        
        
        -S<sortspec>
        
            If you are *not* using the global AREALISTSORT keyword for sorting
            all the areas, you can sort the areas of each AREAFILE separately.
            See the AREALISTSORT keyword for the definition of <sortspec>.
        
        
        If no path is specified, the appropriate environment variable or the
        AREAPATH is used to find the files.
        
        The <programname> can be one of the following:
        
        AdeptXBBS
        
            Reads the AdeptXBBS configuration files.
        
            Looks for the ADEPTXBBS environment variable.
        
        
        AreasBBS
        
            GoldED is can handle a wide variety of AREAS.BBS type files. It
            can read and distinguish between the old CONFMAIL style with paths
            for *.MSG areas, the Hudson/Goldbase style with board numbers, the
            Squish style with "$basename" and the JAM style with "!basename".
        
        ______________________________________________________________________
                                                                              
        Area Configuration                          GoldED Reference, Page 100
                                                                              
            The disadvantage of using an AREAS.BBS is that there are no area
            descriptions. The echoid is used as description instead. However,
            GoldED will use any text behind a semicolon on definition lines as
            description. This may or may not be compatible with mail
            processors, so be careful. A better solution may be to use the
            AREAFILE Echolist to add descriptions from a separate file.
        
            One or more AREAS.BBS files may be specified on the same line.
        
        
        Concord
        
            Support is planned but not yet implemented.
        
        
        D'Bridge
        
            Reads the DBRIDGE.AA1/.AA2 files (for version 1.30) or the
            DBRIDGE.ADF of the later versions.
        
            Looks for the "DBRIDGE" and "DB" environment variables.
        
        
        Dutchie
        
            Reads the DUTCHIE.ARE file.
        
            Looks for the "DUTCHIE" environment variable.
        
        
        Echolist
        
            Reads a simple ascii-text file containing an echolist in this
            format:
        
              <echoid> <description>
        
            or DZ-format (requires -DZ switch):
        
              [Status], Tag, Comment, Moderator's Name, Address,[Flags]
        
            This feature adds descriptions to already existing areas in
            GoldED. Example:
        
              AREAFILE AreasBBS AREAS.BBS
              AREAFILE EchoList ECHOLIST.TXT
              AREAFILE EchoList echo5020.lst -dz
        
            Descriptions for unknown echoids are ignored. Blank lines and
            lines beginning with characters which are illegal in echoids (such
            as ';') are also ignored.
        
            Additional switch -SqaFix could be used to read echolist and groups
            from SqaFix configuration file:
        
              AREAFILE Squish C:\SQUISH\
        ______________________________________________________________________
                                                                              
        Area Configuration                          GoldED Reference, Page 101
                                                                              
              AREAFILE EchoList C:\SQUISH\SQAFIX.CFG -SqaFix
        
        
        Ezycom
        
            Reads CONFIG.EZY and MESSAGES.EZY. Supports Ezycom 1.02 and 1.10g,
            but not 1.01.
        
            Looks for the "EZY" and "TASK" environment variables.
        
        
        FastEcho
        
            Reads the FASTECHO.CFG file. Supports version 1.10 up to 1.46.
        
            Looks for the "FASTECHO" environment variable.
        
        
        Fidoconfig
        
            Reads fidoconfig (used in Husky Project software). Supports
            version 0.15. Used parser is more powerful than original from
            fidoconfig, due to it strictly follows specification from proposal
            and implements all features from there. Additionaly it implements
            groups not described in proposal but used in in library.
        
            Looks for the "FIDOCONFIG" environment variable.
        
        
        FidoPCB
        
            Reads FIDOPCB.CFG. Supports version 1.x.
        
            Looks for the "FIDOPCB" environment variable.
        
        
        FMail
        
            Reads FMAIL.CFG and FMAIL.AR. Supports versions 0.92, 0.98, 1.0g,
            and 1.20.
        
            Looks for the "FMAIL" environment variable.
        
        
        FrontDoor
        
            Reads the SETUP.FD/FD.SYS and FOLDER.FD/FOLDER.SYS files. If you
            want the real echoid's attached to the areas, you will also need
            to supply the filename of the relevant AREAS.BBS file(s). Supports
            versions 1.99c and 2.xx.
        
            Looks for the "FD" environment variable.
        
        
        GEcho
        
        ______________________________________________________________________
                                                                              
        Area Configuration                          GoldED Reference, Page 102
                                                                              
            Reads SETUP.GE and AREAFILE.GE. Supports versions 1.00, 1.02,
            1.10, 1.11 and 1.20.
        
            Looks for the "GE" environment variable.
        
        
        IMAIL
        
            Reads the IMAIL.CF and IMAIL.AR files. Supports version 1.60,
            1.7x and 1.8x.
        
            Looks for the "IMAIL" environment variable.
        
        
        InterMail
        
            Reads the FD.SYS/IMSYS.CFG and FOLDER.CFG/IMFOLDER.CFG files.
            Supports version 2.26 and newer.
        
            Looks for the "IM" environment variable.
        
        
        LoraBBS
        
            Reads the CONFIG.DAT and SYSMSG.DAT files. Supports version 2.33,
            2.40 and possibly others.
        
            Looks for the "LORA" and "LORABBS" environment variables.
        
        
        Maximus
        
            Reads the MAX.PRM and AREA.DAT or MAREA.DAT files. Compatible (or
            should be) with both the old (1.xx) and (2.xx) and new (3.xx)
            formats. If your AREA.DAT is named differently, you must supply
            the correct filename.
        
            Looks for the "MAXIMUS" environment variable.
        
        
        ME2
        
            Reads the old ME2 editor AREADESC.ME2 file and AREAS.BBS file(s).
            You must supply the names of both files.
        
        
        Opus
        
            Reads the Opus 1.1x SYSTEM??.DAT files or the Opus 1.7x SYSMSG.DAT
            file.
        
            Looks for the "OPUS" environment variable.
        
        
        ParToss
        
        ______________________________________________________________________
                                                                              
        Area Configuration                          GoldED Reference, Page 103
                                                                              
            Reads the ParToss configuration file.
        
        
        PCBoard
        
            Reads the PCBOARD.DAT, CNAMES.@@@ and CNAMES.ADD files. Supports
            version 14.x and 15.x, up to and including 15.22. Note that,
            depending on the version, echoid's may not be read from this
            format. If the echoid is not available, the description is used as
            echoid, after conversion to uppercase and spaces to underscores.
        
            Looks for the "PCBOARD" environment variable.
        
        
        Portal
        
            Reads the PORTAL*.CFG and PORTAL.ARE files.
        
            Looks for the "POPCMDLINE" environment variable.
        
        
        ProBoard
        
            Reads MSGAREAS.PB. Supports version 2.0.
        
            Looks for the "PB" environment variable.
        
        
        QEcho
        
            Reads /etc/qecho/AreaList. Supports version patched by Eugene
            Sorochinsky for JAM message base support.
        
        
        QFront
        
            Reads QORIGIN.DAT and QECHOS.DAT. Supports version 1.13b.
        
            Looks for the "QFRONT" environment variable.
        
        
        QuickBBS
        
            Reads the CONFIG.BBS or QUICKCFG.DAT and MSGCFG.DAT files. To get
            the real echoid's, you must also supply the filename of the
            relevant AREAS.BBS.
        
            Looks for the "QUICKBBS" and "QBBS" environment variables.
        
        
        RaEcho
        
            Reads AREAS.RAE. Supports version 1.00 and 1.01.
        
            Looks for the "RAECHO" environment variable.
        
        ______________________________________________________________________
                                                                              
        Area Configuration                          GoldED Reference, Page 104
                                                                              
        
        RemoteAccess
        
            Reads the MESSAGES.RA file. To get the real echoid's, you must
            also supply the filename of the relevant AREAS.BBS. Supports
            versions 0.xx, 1.xx, 2.0x and 2.5x.
        
            Looks for the "RA" environment variable.
        
        
        Squish
        
            Reads SQUISH.CFG and AREAS.BBS (if used). Supports version 1.0x
            and 1.1x. The "Include <filename>" feature of Squish 1.10 is also
            supported.
        
            The optional /G switch specifies the default group of the imported
            areas, i.e. /g=G or /g=#103.
        
            Looks for the "SQUISH" and "MAXIMUS" environment variables.
        
        
        SuperBBS
        
            Reads CONFIG.BBS, SCONFIG.BBS and BOARDS.BBS. Supports version
            1.16 and 1.17.
        
            Looks for the "SUPERBBS" and "SBBS" environment variables.
        
        
        timEd
        
            Reads TIMED.CFG and any included file. Also reads the
            configuration from other mail software defined in TIMED.CFG.
        
            Looks for the "TIMED" environment variable.
        
        
        Termail
        
            This is for the Terminate Mail system (Termail). GoldED does
            currently only support Termail 4.00 und 5.xx style .CFG-files.
        
            Reads TM.CFG and any AREAFILE (an AREAS.BBS type file) defined
            there.
        
            NOTE: If you use this, you must start GoldED in the Termail
            directory, because the standard TM configuration files use
            relative paths.
        
            Looks for the "TM" environment variable.
        
        
        TosScan
        
            Reads the FD.SYS/SETUP.FD and AREAFILE.FD files. Supports version
        ______________________________________________________________________
                                                                              
        Area Configuration                          GoldED Reference, Page 105
                                                                              
            1.00 and FrontDoor 1.99c and 2.xx.
        
            Looks for the "FD" environment variable.
        
        
        WaterGate
        
            Reads the WTRCFG.TDB and AREABASE.TDB files. Supports version
            0.93.
        
        
        WMail
        
            Reads the WMAIL.PRM and AREAS.PRM files. Supports version 2.2.
        
            Looks for the "WMAIL" environment variable.
        
        
        XMail
        
            Reads the AREAS.XM file. Supports version 1.00.
        
            Looks for the "XM" environment variable.
        
































        ______________________________________________________________________
                                                                              
        Area Configuration                          GoldED Reference, Page 106
                                                                              
        ______________________________________________________________________
                                                                              
                                   The Random System                          
        ______________________________________________________________________
                                                                              
        
        With the Random System, you can define area-specific sets of origins,
        netnames, tearlines, templates, usernames and many other items. If
        more than one item of each type is specified, a random one is picked -
        a Random System. This is a very useful feature when (for example)
        participating in conferences with different languages.
        
        The Random System is built on the idea of "groups". A group is a
        collection of "items", belonging to the group. You can assign one or
        more echomail areas, designated by their echoid's to a group. Groups
        can also be specified for just a single echo, and DOS/4DOS-style
        wildcards can be used to simplify the assignment of echoes with common
        strings in their name, such as *.DK, SIG.* and so on. In this way, you
        could for example setup one group for all national echoes, another for
        special local echoes, a third for international echoes etc.
        
        
        Defining Groups
        
        The general syntax of a group definition is:
        
        GROUP <id>[:]
          ; items go here
          [Member <id list>]
        ENDGROUP
        
        The Group <id> can be one of three things:
        
        1.  A group letter or #number, matching the group letters or numbers
            used in the AREAFILE's of D'Bridge, GEcho, IMAIL, TosScan and many
            others. To use this feature, you need to enable the AREAFILEGROUPS
            keyword.
        
        2.  An individual echoid or echoid mask (wildcards can be used). The
            items are then simply defined below the Group line.
        
        3.  A group label, terminated by a colon (:). The group items are
            defined below the Group line. Echoes are assigned to the group by
            adding one or more Member statements.
        
        You can't assign a group to another group. It will not harm, but it
        also won't work :-)
        
        The order of groups is very important. GoldED scans the groups from
        the top down. This means that the most general groups must be placed
        at the bottom and exceptions (individual areas for example) must be
        placed at the top.
        
        
        Defining Random Items
        
        ______________________________________________________________________
                                                                              
        The Random System                           GoldED Reference, Page 107
                                                                              
        The random items are defined much like in the main GoldED
        configuration file.
        
        If more than one of each item is defined within a group, those items
        will be picked randomly (hence the name "Random System"), while GoldED
        collects items when entering an area.
        
        Random Item Keywords:
          AKA
          AKAMATCHING
          AREACOPYDIRECT
          AREACOPYTO
          AREAFREQDIRECT
          AREAFREQTO
          AREAREPLYDIRECT
          AREAREPLYTO
          AREAYOUWROTETO
          ATTRIBUTES
          CTRLINFO
          EDITHARDTERM
          EDITMIXCASE
          EDITREPLYRE
          FORCETEMPLATE
          INPUTFILE
          INTERNETADDRESS
          INTERNETGATE
          INTERNETMSGID
          INTERNETRFCBODY
          LOADLANGUAGE
          MSGLISTDATE
          MSGLISTFAST
          MSGLISTFIRST
          MSGLISTHEADER
          MSGLISTWIDESUBJ
          NETNAME
          NICKNAME
          ORGANIZATION
          ORIGIN
          OUTPUTFILE
          PLAY
          QUOTEBUFFILE
          QUOTECHARS
          QUOTESTRING
          QUOTEWRAPHARD
          SEARCHFOR
          TAGLINE
          TAGLINECHAR
          TEARLINE
          TEMPLATE
          TEMPLATEMATCH
          TWITMODE
          USEFWD
          USERNAME
          USETZUTC
          VIEWHIDDEN
          VIEWKLUDGE
        ______________________________________________________________________
                                                                              
        The Random System                           GoldED Reference, Page 108
                                                                              
          VIEWQUOTE
          WHOTO
          XLATEXPORT
          XLATIMPORT
        
        See the Configuration Keyword Reference chapter for details about each
        keyword.
        
        
        Random System Example
        
        Below is an example of how a Random System could be setup. Note how
        the letter group 'D' goes first, followed by the explicit group
        definitions for the NERDS and FOO echoes. Then comes the more general
        groups (those with Label:'s), where the echoes are assigned with one
        or more Member statements. At last there is the catch-all "Group *",
        which works as the default group.
        
        
        === Cut, GOLDRAND.CFG ===
        
        Group NERDS           ; For the NERDS echo.
          Origin "I am a Nerd. Take me to your Loser!"
        
        Group FOO             ; This group is *only* for the FOO echo.
          Tearline FooED @rev
          Origin "Foo-ing my day away"
        
        Group FooEchoes:
          Member *FOO*        ; Use wildcards to catch any other foo echo.
          Tearline FooED @rev
          Origin "This is a Foo-lish origin"
        
        Group FidoNet:
          Member NET_DEV, WORLDPOL, INTERCOOK
          Member GREEN.029, C_ECHO, C_PLUSPLUS
          Origin "Fight-O-Net? Good name..."
          Template FIDONET.TPL
          Whoto Everyone
        
        Group SigNet:
          Member SIG.*         ; The wildcard is VERY handy here ;-)
          Origin "To SIG or not to SIG..."
          Template SIGNET.TPL
        
        Group D               ; Letter D for Danish echoes.
          Template DANSK.TPL
        
        Group *                ; This is default group
          Origin "Yet another forgotten echo"
        
        === Uncut ===
        
        See the example GOLDRAND.CFG in the ADVANCED archive for a real-life
        setup similar to the one I use myself.
        
        ______________________________________________________________________
                                                                              
        The Random System                           GoldED Reference, Page 109
                                                                              
        ______________________________________________________________________
                                                                              
                                  Color Configuration                         
        ______________________________________________________________________
                                                                              
        
        Color configuration in GoldED is a bit complicated, and you probably
        have to experiment quite a bit, if you want make your own setup. For
        your convenience, I have added a number of example color setups,
        provided by some of my many good users. I suggest you try them all and
        use the one that suits you best, perhaps tuning it a bit to your
        taste.
        
        The COLOR keyword uses the following syntax:
        
        COLOR <window> <part> <colors>
        
          <window>  AREA, ASK, BACKGROUND, BRAG, HEADER, HELP, INFO, MENU,
                    READER, SHADOW, STATUS.
        
          <part>    BLOCK, BORDER, BTYPE, EDIT, HIDDEN, HIGHLIGHT, INPUT,
                    KLUDGE, NOSELECT, ORIGIN, QUOTE, SELECTOR, TEARLINE,
                    TITLE, WINDOW.
        
        The <colors> are composed of [blinking] <ink> [on <paper>].
        
          <ink>     Black, Blue, Green, Cyan, Red, Magenta, Brown, LGrey,
                    DGrey, LBlue, LGreen, LCyan, LRed, LMagenta, Yellow,
                    White.
        
          <paper>   Black, Blue, Green, Cyan, Red, Magenta, Brown, LGrey.
        
        For monochrome setups we instead have:
        
          <ink>     Normal, Highlight, Reverse, Underline.
        
        The SHADOW color does not need a <part>, because it is global.
        
        The paper color always defaults to Black if not specified.
        
        If <part> is "BTYPE", the <color> is a value in the range 0-3, which
        defines the type of lines used when drawing menus and windows:
        
        BTYPE 0 is single horizontal and single vertical lines.
        BTYPE 1 is double horizontal and double vertical lines.
        BTYPE 2 is single horizontal and double vertical lines.
        BTYPE 3 is double horizontal and single vertical lines.
        
        The default border type is always BTYPE 0.
        
        The following is a description of the different window parts:
        
        Various general color items
        
          SHADOW              Shadow below windows and menus.
          STATUS WINDOW       Status line at the bottom.
        ______________________________________________________________________
                                                                              
        Color Configuration                         GoldED Reference, Page 110
                                                                              
          BACKGROUND WINDOW   Background for the startup window.
          BACKGROUND BORDER   Overscan color (currently DOS only).
        
          <anything> PAGEBAR  Pagebar (scrollbar).
        
          The PAGEBAR color specifially sets the color of the pagebars
          (scrollbars) in GoldED. A pagebar color can currently be set for
          AREA, READER and MENU. Note that BORDER will set both the BORDER and
          PAGEBAR colors, so remember to place the PAGEBAR color below the
          BORDER color.
        
        Startup screen / logo window
        
          BRAG WINDOW         The Copyright window.
          BRAG BORDER         Lines around the Copyright window.
          BRAG TITLE          The logo text.
          BRAG HIGHLIGHT      The inner logo lines.
          BRAG BLOCK          The outer logo lines.
          BRAG BTYPE          Copyright window border type.
        
        Area Selection Menu
        
          AREA WINDOW         Descriptions, the top line (inc. search).
          AREA BORDER         Lines.
          AREA TITLE          Titles on the border.
          AREA SELECTOR       Selection bar.
          AREA HIGHLIGHT      The color for the area marks.
          AREA BTYPE          Window border type.
        
        Message Header
        
          HEADER WINDOW       Header text.
          HEADER BORDER       Lines.
          HEADER TITLE        Titles on the border.
          HEADER INPUT        Message number input field.
          HEADER EDIT         Header input fields.
          HEADER HIGHLIGHT    Marks.
          HEADER BTYPE        Window border type.
          HEADER FROM         Header From field.
          HEADER TO           Header To field.
          HEADER SUBJECT      Header Subject field.
        
          The FROM/TO/SUBJECT colors supplement the HEADER WINDOW color. Note
          that WINDOW will also set the FROM/TO/SUBJECT colors, so remember to
          place the new colors below it.
        
        Message Text
        
          READER WINDOW       Normal message text.
          READER BORDER       The Pagebar.
          READER QUOTE        (Odd) Quoted lines.
          READER QUOTE2       (Even) Quoted lines.
          READER CURSOR       Character at cursor pos. (int. editor).
          READER KLUDHIDD     Kludges and hidden lines.
          READER TEARORIG     Tearline and Origin.
          READER BLOCK        Block color (internal editor).
        ______________________________________________________________________
                                                                              
        Color Configuration                         GoldED Reference, Page 111
                                                                              
          READER BTYPE        Window border type.
          READER HIGHLIGHT    Search highlight in the message text.
          READER KLUDGE       Known kludges.
          READER HIDDEN       Hidden lines. (Unknown kludges).
          READER SIGNATURE    Internet-Style signatures ("-- ").
          READER TAGLINE      Taglines. (Only the one just above tearline).
          READER TEARLINE     Tearline.
          READER ORIGIN       Origin.
        
          The KLUDGE/HIDDEN colors replaces the old KLUDHIDD color. Note that
          KLUDHIDD will set both the KLUDGE and HIDDEN colors, so remember to
          place the new colors below it if you keep the old definition.
        
          The TAGLINE color is the color of taglines. GoldED detects a tagline
          if it starts with "..." or "___" and is just above the tearline or
          origin.
        
          The TEARLINE/ORIGIN colors replaces the old TEARORIG color. Note
          that TEARORIG will set both the TEARLINE and ORIGIN colors, so
          remember to place the new colors below it if you keep the old
          definition.
        
        Miscellaneous Smaller Menus
        
          ASK WINDOW          Menu items.
          ASK BORDER          Lines.
          ASK TITLE           Menu title.
          ASK SELECTOR        Selection bar.
          ASK NOSELECT        Non-selectable menu items.
          ASK HIGHLIGHT       Hotkeys.
          ASK BTYPE           Window border type.
        
        Miscellaneous Larger Menus (Browser Windows)
        
          MENU WINDOW         Menu items.
          MENU BORDER         Lines.
          MENU TITLE          Menu title.
          MENU SELECTOR       Selection bar.
          MENU NOSELECT       Non-selectable menu items.
          MENU HIGHLIGHT      Hotkeys/marks.
          MENU UNREAD         When a msg is unread.
          MENU UNREADHIGH     Additional highlight of to/from.
          MENU UNSENT         When a msg is unsent.
          MENU UNSENTHIGH     Additional highlight of to/from.
        
        Help Screens
        
          HELP WINDOW         Help text.
          HELP BORDER         Lines.
          HELP SELECTOR       Current keyword.
          HELP HIGHLIGHT      Other keywords.
          HELP BTYPE          Window border type.
        
        Pop Up Information Windows
        
          INFO WINDOW         Window text.
        ______________________________________________________________________
                                                                              
        Color Configuration                         GoldED Reference, Page 112
                                                                              
          INFO BORDER         Lines.
          INFO TITLE          Info title.
          INFO BTYPE          Window border type.
        
        Stylecodes
        
          STYLECODE ALL       All stylecodes at once.
          STYLECODE B         *Bold*
          STYLECODE I         /Italic/
          STYLECODE BI        /*BoldItalic*/
          STYLECODE U         _Underline_
          STYLECODE BU        _*BoldUnderline*_
          STYLECODE IU        /_ItalicUnderline_/
          STYLECODE BIU       _/*BoldItalicUnderline*/_
          STYLECODE R         #Reverse#
          STYLECODE RB        *#ReverseBold#*
          STYLECODE RI        /#ReverseItalic#/
          STYLECODE RBI       /*#ReverseBoldItalic#*/
          STYLECODE RU        _#ReverseUnderline_#
          STYLECODE RBU       _*#ReverseBoldUnderline#*_
          STYLECODE RIU       _/#ReverseItalicUnderline#/_
          STYLECODE RBIU      _/*#ReverseItalicUnderline#*/_
        
          Note that stylecode color definitions must be placed below COLOR
          READER WINDOW, because it overrides the COLOR STYLECODE definitions.
        
        See the GEDCOL*.CFG and GEDMON*.CFG files for examples of color
        configuration.
        



























        ______________________________________________________________________
                                                                              
        Color Configuration                         GoldED Reference, Page 113
                                                                              
        ______________________________________________________________________
                                                                              
                                 The Message Template                         
        ______________________________________________________________________
                                                                              
        
        The message template gives you a ready-made skeleton for writing your
        messages in the editor. The template is one of GoldED's many strong
        features. With this, you can eliminate the tedious typing of greetings
        etc etc. GoldED also provides a number of replacement strings,
        "tokens", to dynamically add message specific information to the
        template.
        
        As in the configuration file, a semicolon (;) first on the line makes
        the line a comment. Any other line is put into the editor file, after
        token expansion. Tokens are not case sensitive.
        
        The following is a list of the tokens available:
        
        
        Conditional tokens (these are replaced with a null string)
        
        @changed    Line is only inserted in Changed msgs (from others).
        @comment    Line is only inserted in Reply-Comments.
        @echo       Line is only inserted in Echomail.
        @forward    Line is only inserted in Forwarded messages.
        @local      Line is only inserted in Local messages.
        @moderator  Line is only inserted if substring "moderator" appeared in
                    from line.
        @moved      Line is only inserted in Reply-Moved messages.
        @net        Line is only inserted in Netmail.
        @new        Line is only inserted in New messages (not replies).
        @position   Specifies the starting line for the editor cursor.
        @quotebuf   Line is only inserted in Quotebuffered msgs.
        @quoted     Line is only inserted in Quoted replies.
        @reply      Line is only inserted in Non-Quoted Replies.
        
        
        Insert tokens (anything else on the line is ignored)
        
        @attrib         <attributes> - Adds specific message attributes.
        @include        <filename> - Inserts the file.
        @forcefrom      <"from"> - sets message FROM: field, even if non-empty
                          (see @setfrom)
        @forcesubj      <"subject"> - sets message SUBJ: field, even if non-empty
                          (see @setsubj)
        @forceto        <"to"> - sets message TO: field, even if non-empty
                          (see @setto)
        @loadlanguage   Loads a partial language config file.
        @message        Inserts the original message (in Forward & Change).
        @quote          Inserts a quote of the original message.
        @random         [random.txt] - Inserts random text.
        @setfrom        <"from"> - Sets the message FROM: field.
        @setsubj        <"subject"> - Sets the message SUBJ: field.
        @setto          <"to"> - Sets the message TO: field.
        @xlatexport     <charset> - Sets the export charset.
        ______________________________________________________________________
                                                                              
        The Message Template                        GoldED Reference, Page 114
                                                                              
        
        
        Replacement tokens (replaced with message specific data):
        
        @c3daddr    Current user 3D (boss) address.
        @caddr      Current user address.
        @cdate      Current date.
        @cdesc      Current area description.
        @cecho      Current echoid.
        @cfname     Current user first name.
        @clname     Current user last name.
        @cname      Current user name.
        @cpseudo    Current pseudonym given by NICKNAME keyword, or @cfname.
        @ctime      Current time.
        @ctzoffset  Current timezone offset (if available and enabled).
        @d3daddr    Destination 3D (boss) address.
        @daddr      Destination address.
        @dfname     Destination first name.
        @dlname     Destination last name.
        @dname      Destination name.
        @dpseudo    Destination pseudonym (see addressbook), or @dfname.
        @f3daddr    Current from 3D (boss) address.
        @faddr      Current from address.
        @ffname     Current from first name.
        @flname     Current from last name.
        @fname      Current from name.
        @fpseudo    Current from pseudonym (see addressbook), or @ffname.
        @longpid    Long program id. "GoldED", "GoldED/2" or "GoldED/386".
        @o3daddr    Original 3D (boss) address.
        @oaddr      Original address.
        @odate      Original date.
        @odesc      Original area description if moved, else current.
        @oecho      Original echoid if moved, otherwise current.
        @ofname     Original first name.
        @ofrom      Original RFC "From" headerline.
        @olname     Original last name.
        @omessageid Original RFC "Message-ID" headerline.
        @omsgid     Original MSGID kludge content.
        @oname      Original name.
        @opseudo    Original pseudonym (see addressbook), or @ofname.
        @origin     The current global or Random System origin.
        @os2slash   "/2" if running GoldED/2. Empty otherwise.
        @osslash    same as above.
        @otime      Original time.
        @otzoffset  Original timezone offset (if available and enabled).
        @oto        Original RFC "To" headerline.
        @pid        Short program id. "GED", "GED/2" or "GED386".
        @pseudo     pseudonym (see addressbook), or @tfname.
        @rev        The revision number (in the form mmdd).
        @serialno   Emptiness.
        @subject    The message subject line.
        @t3daddr    Destination to 3D (boss) address.
        @taddr      Destination to address.
        @tagline    The current global or Random System tagline.
        @tearline   The current global or Random System tearline.
        @tfname     Destination to first name.
        ______________________________________________________________________
                                                                              
        The Message Template                        GoldED Reference, Page 115
                                                                              
        @tlname     Destination to last name.
        @tname      Destination to name.
        @tpseudo    Destination to pseudonym (see addressbook), or @tfname.
        @ver        The simple version number (in the form x.yy)
        @version    The complete release version number of GoldED.
        @_caddr     Current user address (fixed width: 19 chars).
        @_cname     Current user name (fixed width: 34 chars).
        @_daddr     Destination address (fixed width: 19 chars).
        @_dname     Destination name (fixed width: 34 chars).
        @_oaddr     Original address (fixed width: 19 chars).
        @_oname     Original name (fixed width: 34 chars).
        @_taddr     Destination to address (fixed width: 19 chars).
        @_tname     Destination to name (fixed width: 34 chars).
        
        
        Tokens dealing with names may optionally have two parameters (each
        parameter enclosed in curve brackets): your name and opponent name,
        destination name additionally accepts third parameter - WhoTo name.
        Here is example on how this feature could be used:
        
           @oname{I}{You} wrote to @dname{me}{you}{everyone}:
        
        
        The template text begins at the first non-comment line.
        
        See the included GOLDED.TPL for example usage.
        
        If you need to put some text which contains one of these tokens into a
        template file, use an extra '@' in front of the token.
        
        Example:
        
          Internet: somebody@veryhot.com
        
        would produce
        
          Internet: somebody2.51yhot.com    (because @ver is a token)
        
        so write it like this instead:
        
          Internet: somebody@@veryhot.com
        
        The double '@' will then be translated to a single, and token
        translation skips past the @token.
        











        ______________________________________________________________________
                                                                              
        The Message Template                        GoldED Reference, Page 116
                                                                              
        ______________________________________________________________________
                                                                              
                                The Online Help System                        
        ______________________________________________________________________
                                                                              
        
        GoldED has a built-in context sensitive help system, tied to the <F1>
        key (one of the very few keys that cannot be reconfigured). It
        contains a complete keyboard reference and help for most situations.
        It is current not as complete or sophisticated as I'd like it myself,
        but this may be improved in future versions.
        
        You can completely redefine the help screens if you wish - the
        GOLDHELP.CFG file is a plain ASCII text file which contains all help
        definitions. The help file is split into several help categories. Here
        is an example of a couple of defined help categories:
        
            *B 1,Help Category 1
            help text help text help text
            help text help text help text
            *P
            help text help text help text
            help text help text help text
            *E
        
            *B 2,Help Category 2
            help text help text help text
            help text help text help text
            *P
            help text help text help text
            help text help text help text
            See also: ^Help Category 1^
            *E
        
        The "*B" indicator specifies the beginning of a help category. The
        format is "*B helpcatnumber[,helpcatname]". In GoldED the help
        categories are numbered 1000-9999, split into more or less logical
        groups. See the help file for assignments. There should be only one
        space between the "*B" and the help category number. The help category
        name is only required for cross-references. If there are no
        cross-references to that help category, then you can leave the
        helpcatname parameter out.
        
        The "*P" indicator specifies a page break and is optional. You may
        have as many page breaks as you'd like. The "*E" indicator specifies
        the end of the help category. The "*B", "*P", and "*E" indicators must
        all begin in the first column. These indicators and the help category
        name are case insensitive (can be in lowercase, uppercase, or mixed).
        
        In the definition of Help Category 2, you will notice the
        crossreference to Help Category 1. All cross-referencing is done by
        embedding the cross- reference category name (not number) inside
        carats (^). If you need to display a carat inside the help file, use a
        double carat (^^).
        
        Any text contained outside of the "*B" and "*E" is treated as
        ______________________________________________________________________
                                                                              
        The Online Help System                      GoldED Reference, Page 117
                                                                              
        comments. If an "*E" is not found, then the end-of-file will be
        treated as an "*E".
        
        Not all of the help categories in this help file are actually used in
        the current version of GoldED. The ones not used are empty, except for
        a two-line "header".
        
        The usable dimensions of the help window are 60 columns by 16 lines.
        In the help file there is a model of the actual window.
        














































        ______________________________________________________________________
                                                                              
        The Online Help System                      GoldED Reference, Page 118
                                                                              
        ______________________________________________________________________
                                                                              
                                 Character Translation                        
        ______________________________________________________________________
                                                                              
        
        GoldED implements several different proposals for character
        translation in imported and exported messages:
        
        FSC-0050  "Charset Identifier" by Thomas Sundblom.
        FSC-0051  "I51" by Thomas Gradin.
        FSC-0054  "CHARSET proposal" by Duncan McNutt.
        No FSC    "Composed Characters" by Andre van de Wijdeven.
        
        FSC-0050 is currently known to be implemented in the OPMED 3.xx
        message editor, and in Opus 1.7x. It uses the same identifier as
        FSC-0054 (a ^aCHARSET kludge), but is a lot simpler (but not
        necessarily better).
        
        The "I51" and "CHARSET" proposals are in the process of being merged
        to one proposal, which should combine the advantages of both. They are
        both based on using the LATIN-1 (also known as ISO 8859-1) character
        set for extended ASCII. The LATIN-1 set is the same set used by
        Windows 3.xx, Amiga and many other non-PC computers. In addition to
        LATIN-1, I51 defines a set of so-called escape sequences for
        characters not found in the LATIN-1 set.
        
        "Composed Characters" became quite popular in Holland, but the author
        decided to drop his proposal because it relied on escape sequences
        using the so called "soft-cr" (141d, 8Dh) character. GoldED will
        continue to support Composed as long as it seems necessary.
        
        If you want to know more about the details, I suggest you read the
        proposals or contact the authors.
        
        GoldED currently supports two types of translation tables, the *.ESC
        files and the *.CHS files.
        
        
        The ESC translation tables
        
        The *.ESC files are used for import translation of the escape
        sequences defined in I51 and Composed Characters.
        
        In the ESC files, the semicolon is used for comments. The *first*
        non-comment line defines the charset the escape code are mapped TO.
        This is normally IBMPC, and should not be changed. Any other
        non-comment line is treated as an escape sequence definition with this
        syntax:
        
          <esc1><esc2><space><map chars>[; comment/description]
        
        Leading spaces are *not* allowed in ESC files. <esc1> and <esc2> are
        the two characters that define the escape sequence. <space> is ignored
        and can be used to make the table look better. <map chars> defines the
        local representation of the escape sequence, up to three characters.
        ______________________________________________________________________
                                                                              
        Character Translation                       GoldED Reference, Page 119
                                                                              
        Normally you would only map to one extended ascii character. The map
        chars can be either the characters themselves, or decimal or
        hexadecimal numbers of the form "\d<dec>" or "\x<hex>" (like in the C
        programming language).
        
        
        The CHS translation tables
        
        The *.CHS files are used for import and export translation of the
        CHARSET type character sets, and export of I51 and Composed escape
        sequences.
        
        The CHS files uses the format of the raw text files provided in the
        CHARSET3.ZIP example implementation of FSC-0054. Study some of the
        files provided if you want to know how to define them.
        
        The two keywords XLATESCSET and XLATCHARSET are used to define which
        files belong to what import and export set. You can define more than
        one import and export set for each file.
        
        The keyword XLATIMPORT defines which charset you have on your own
        machine - this would normally be "IBMPC". It can be useful to change
        this (using the Random System) in areas where another character set
        than IBMPC is the dominant (like Amiga or MacIntosh, whatever).
        
        The keyword XLATEXPORT defines the charset your messages should be
        exported to, if any.
        
        Confused? Yeah, I know - this is a confusing subject, and my
        implementation and documentation is not perfect. Normally you will not
        have to worry about it. Turn it off completely if you don't understand
        it.
        























        ______________________________________________________________________
                                                                              
        Character Translation                       GoldED Reference, Page 120
                                                                              
        ______________________________________________________________________
                                                                              
                              Keyboard Command Reference                      
        ______________________________________________________________________
                                                                              
        
        Most of the GoldED keyboard commands can be reached with just one
        keystroke. To ease operation for experienced users of other message
        editors, GoldED comes with several sets of keys for each of the
        keyboard commands - direct non-shifted keys, Alt/Ctrl-keys and
        function keys. Many of these key assignments will be familiar for
        users of Msged, Msged/Q, ME2 and FM.
        
        The following is a list of all keyboard commands, sorted by type and
        alphabetically, using the format
        
          <command>          <short description>
        
        This list is also available in the context-sensitive help system on
        the <F1> key.
        
        It is possible to almost completely redefine the keyboard - this in
        done in the GOLDKEYS.CFG file, which also handles macro definition
        (see later).
        
        
        Arealist commands:
        
        AREAabort               Abort the arealist.
        AREAaskexit             Exit GoldED, prompt for final decision.
        AREAboardnos            Toggle sequential areas vs. board numbers.
        AREAcatchup             Point the lastread pointer to the last message
                                in the current area.
        AREAdosshell            Shell to DOS.
        AREAdropmsgmarks        Unmark all msgs in selected areas.
        AREAgotofirst           Move selection bar to first area.
        AREAgotolast            Move selection bar to last area.
        AREAgotonext            Move selection bar to next area.
        AREAgotoprev            Move selection bar to previous area.
        AREAheat                Heat highwatermarks.
        AREAjump                Move selection bar to next marked area.
        AREAjumpnextmatch       Move selection bar to next matching area.
        AREAquitnow             Exit immediately, no questions asked.
        AREAscan                Scan areas.
        AREAscanpm              Scan areas for personal mail.
        AREAselect              Enter the reader for the selected area.
        AREAselectmarks         Select which set of area marks should be used.
        AREAsoundkill           Stops currently played sound file.
        AREAtoggle              Toggle mark on the selected area.
        AREAtouchnetscan        Touches the SEMAPHORE NETSCAN file.
        AREAwritegoldlast       Write a fresh copy of GOLDLAST.LST
        AREAzap                 Zap highwatermarks.
        
        
        Internal editor commands:
        
        ______________________________________________________________________
                                                                              
        Keyboard Command Reference                  GoldED Reference, Page 121
                                                                              
        EDITabort               Abort editing this message - ask first.
        EDITanchor              Set a block "anchor" on the current line.
        EDITaskexit             Exit from GoldED - ask first.
        EDITblockdown           Extend block area one line down.
        EDITblockend            Extend block area to the end of line.
        EDITblockhome           Extend block area to the beginning of line.
        EDITblockleft           Extend block area one character left.
        EDITblockpgup           Extend block area one screen up.
        EDITblockpgdn           Extend block area one screen down.
        EDITblockright          Extend block area one character right.
        EDITblockup             Extend block area one line up.
        EDITcleardeletebuf      Clears the undelete buffer.
        EDITclearpastebuf       Clears the cut'n'paste buffer.
        EDITcopy                Copies the block to the cut'n'paste buffer.
        EDITcopyabovechar       Inserts character same as in the same position
                                in previous line.
        EDITcut                 Cut the block to the cut'n'paste buffer.
        EDITdelchar             Delete the char at the cursor position.
        EDITdelete              Delete the block.
        EDITdeleteeol           Delete from cursor position to end of line.
        EDITdelleft             Delete the char to the left of the cursor.
        EDITdelline             Delete the current line. (Copied to the
        EDITdelltword           Delete the word to the left of the cursor.
        EDITdelrtword           Delete the word to the right of the cursor.
        EDITdosshell            Shell to DOS.
        EDITdupline             Duplicates the current line.
        EDITexitmsg             Drop this message - NO ASKING! DANGEROUS!
        EDITexporttext          Exports the current block to a file.
        EDITgobegline           Move cursor to beginning of line.
        EDITgobotline           Move cursor to the bottom line in the display.
        EDITgobotmsg            Move cursor to the last line in the message.
        EDITgodown              Move cursor down to next line.
        EDITgoeol               Move cursor to the end of the line.
        EDITgoleft              Move cursor one position left.
        EDITgopgdn              Move cursor one page of lines down.
        EDITgopgup              Move cursor one page of lines up.
        EDITgoright             Move cursor one position right.
        EDITgotopline           Move cursor to the top line in the display.
        EDITgotopmsg            Move cursor to the first line in the message.
        EDITgoup                Move cursor up to the previous line.
        EDITgowordleft          Move cursor to the previous word.
        EDITgowordright         Move cursor to the next word.
        EDITheader              Edit the message header, attributes etc.
        EDITimportquotebuf      Imports the current quote buffer.
        EDITimporttext          Import text file into this message.
        EDITkillquotes          (ignored)
        EDITloadfile            Load the message file saved with EDITsavefile.
        EDITlookupcursor        Lookup name/node at cursor position.
        EDITlookupdest          Lookup TO: node.
        EDITlookuporig          Lookup FROM: node.
        EDITnewline             Terminate paragraph and/or add a new line.
        EDITpaste               Paste a previously cut block at the cursor.
        EDITquitnow             Quit GoldED immediately - no asking.
        EDITreflow              Reflows the current text or quote paragraph.
        EDITsavefile            Saves the current message as a file.
        EDITsavemsg             Save this message.
        ______________________________________________________________________
                                                                              
        Keyboard Command Reference                  GoldED Reference, Page 122
                                                                              
        EDITsoundkill           Stops currently played sound flie.
        EDITspellcheck          Calls an external spell checker for the msg.
        EDITtab                 Add spaces to the next tab-stop.
        EDITtabreverse          Remove spaces to the prev tab-stop.
        EDITtogglecase          Toggle the case of the cursor character.
        EDITtoggleinsert        Toggle insert mode.
        EDITtolower             Change the cursor character to lowercase.
        EDITtoupper             Change the cursor character to uppercase.
        EDITundelete            Undelete previously deleted lines.
        EDITzapquotebelow       Deletes quotes below.
        
        
        File selection commands:
        
        FILEabort               Abort file selection.
        FILEaskexit             Exit GoldED - ask first.
        FILEdosshell            Shell to DOS.
        FILEgotofirst           Go to first file.
        FILEgotolast            Go to last file.
        FILEgotonext            Go to next file.
        FILEgotoprev            Go to previous file.
        FILEmark                Mark file.
        FILEmarkall             Mark all files.
        FILEquitnow             Quit GoldED immediately.
        FILEselect              Select the marked file(s).
        FILEtogglemark          Toggle file mark.
        FILEunmark              Unmark file.
        FILEunmarkall           Unmark all files.
        
        
        Message lister commands:
        
        LISTabort               Abort message lister.
        LISTaskexit             Exit GoldED - ask first.
        LISTdosshell            Shell to DOS.
        LISTgotobookmark        Go to BookMark message.
        LISTgotofirst           Go to first message.
        LISTgotolast            Go to last message.
        LISTgotonext            Go to next message.
        LISTgotoprev            Go to previous message.
        LISTmarkingoptions      Marking menu.
        LISTquitnow             Quit GoldED immediately.
        LISTselect              Go to reader at the selected message.
        LISTtogglebookmark      Toggle BookMark on the selected message.
        LISTtoggledate          Toggle date column content.
        LISTtogglemark          Toggle Mark on the selected message.
        LISTtogglewidesubj      Toggle between wide and short subject.
        
        
        Nodelist browser commands:
        
        NODEabort               Abort nodelist browsing.
        NODEaskexit             Exit GoldED - ask first.
        NODEdosshell            Shell to DOS.
        NODEgotofirst           Go to first node.
        NODEgotolast            Go to last node.
        ______________________________________________________________________
                                                                              
        Keyboard Command Reference                  GoldED Reference, Page 123
                                                                              
        NODEgotonext            Go to next node.
        NODEgotoprev            Go to previous node.
        NODEquitnow             Quit GoldED immediately.
        NODEselect              Select node.
        
        
        Message reader commands:
        
        READaddressbookadd      Add current/marked mail writer(s) to
                                addressbook. Ask first.
        READaskexit             Exit GoldED, prompt for final decision.
        READchangeaka           Change default AKA address for current area.
        READchangeattrs         Change the attributes of the current message.
        READchangemsg           Change current message.
        READchangeorigin        Change default origin for the current area.
        READchangetagline       Change default tagline.
        READchangetemplate      Change default template.
        READchangeusername      Change default username.
        READchangexlatimport    Change default import charset.
        READcommentmsg          Comment-Reply to message. (Reply to TO name).
        READcopymoveforward     Enter the Copy/Move/Forward function menu.
        READdecreasemargin      Decrease message margin. For test purposes.
        READdeletemsg           Delete current/marked message(s). Ask first.
        READdosshell            Shell to DOS.
        READfidorenumber        Renumber Fido/Opus *.MSG files.
        READfilerequest         Generate a filerequest from the current msg.
        READfindall             Find string(s) in message header and text.
        READfindheader          Find string(s) in message header.
        READgotobookmark        Go to the "BookMark" message.
        READgotofirstmsg        Go to the first message in the area.
        READgotolastmsg         Go to the last message in the area.
        READgotomsgno           Go to a specific message number.
        READgotonextarea        Go directly to the next area.
        READgotonextmsg         Go to the next message.
        READgotonextunread      Go to the next unread message.
        READgotoprevarea        Go directly to the previous area.
        READgotoprevmsg         Go to the previous message.
        READgotoprevunread      Go to the previous unread message.
        READgotoreplies         Choose from the next messages in the replylink.
        READgotoreply1st        Go to the first reply to this message.
        READgotoreplynext       Go to the next reply to this message.
        READgotoreplyprev       Go to the parent message in the replylink.
        READincreasemargin      Increase message margin. For test purposes.
        READlookupdest          Lookup TO: node.
        READlookuporig          Lookup FROM: node.
        READmakeuserlist        Generate FIDOUSER.LST of users in the area.
        READmakepathreport      Added "path report" feature. The output file
                                can be processed by a RDDT (Route Diagram
                                Drawing Tool) utility.
        READmarkingoptions      Enter the marking menu.
        READmessagelist         Enter the message lister.
        READmovecommentmsg      Comment-Reply in another area.
        READmovequotemsg        Quote-Reply in another area.
        READmsgcontinue         Page down or go to next message.
        READmsgend              Display last part of current message.
        READmsghome             Display first part of current message.
        ______________________________________________________________________
                                                                              
        Keyboard Command Reference                  GoldED Reference, Page 124
                                                                              
        READmsglinedown         Scroll message display.
        READmsglineup           Scroll message display.
        READmsgpgdn             Page message display.
        READmsgpgup             Page message display.
        READnewarea             Enter the area selection screen.
        READnewmsg              Start a new message.
        READquitnow             Exit GoldED immediately, no questions asked.
        READquotebuf            Append quote of the msg to the quotebuffer.
        READquotemsg            Quote-Reply to message. (Reply to FROM name).
        READreplymsg            Reply to the current message, without quoting.
        READsearch              Launches the search engine.
        READsoundkill           Stops currently played sound file.
        READthreadtree          Enter the Message Threading lister.
        READtogglebookmark      Toggle a "BookMark" on the current message.
        READtogglehexdump       Toggle hexdump mode. For debugging purposes.
        READtogglehiddklud      Toggle display of Hidden and Kludge lines.
        READtogglehidden        Toggle display of Hidden lines.
        READtogglekludge        Toggle display of Kludge lines.
        READtogglemark          Toggle a message mark on the current message.
        READtogglemarkread      Toggle "Read Marked" mode.
        READtogglepagebar       Toggle the "PageBar" feature.
        READtogglequote         Toggle display of quoted lines. Experimental.
        READtogglerot13         Toggle ROT13 encryption for the current msg.
        READtogglerealmsgno     Toggle between seq. or real message numbers.
        READtogglestyles        Toggle Disable/Show/Show+Strip of STYLECODES.
        READtoggletwits         Toggle Twit display - Show/Blank/Skip/Ignore.
        READtouchnetscan        Touches the SEMAPHORE NETSCAN file.
        READtouchsemaphore      Popup touch a manually entered semaphore file.
        READuserbase            Launches the addressbook.
        READuudecode            UUdecodes the current message.
        READwritemsg            Write message(s) to file or printer.
        
        
        Key undefine commands:
        
        AREAundefine
        EDITundefine
        FILEundefine
        LISTundefine
        NODEundefine
        READundefine
        
        The undefine commands can used to undefine any of the built-in default
        keyboard definitions.
        
        
        See the Key Reference below for a list of the key symbols you can use
        in keyboard redefinition.
        







        ______________________________________________________________________
                                                                              
        Keyboard Command Reference                  GoldED Reference, Page 125
                                                                              
        ______________________________________________________________________
                                                                              
                                Macros and Keystacking                        
        ______________________________________________________________________
                                                                              
        
        GoldED has a simple keyboard macro facility, which you can use to
        automate certain common operations. In addition, a "keystacking"
        facility allows you to create simple automatic macros on the fly.
        
        
        The macro definition syntax is modelled after the syntax used in the
        QEdit text editor:
        
          <assignment-key> Macro     <commands or keys>
          <assignment-key> AreaMacro <commands or keys>
          <assignment-key> EditMacro <commands or keys>
          <assignment-key> FileMacro <commands or keys>
          <assignment-key> ListMacro <commands or keys>
          <assignment-key> NodeMacro <commands or keys>
          <assignment-key> ReadMacro <commands or keys>
        
        Macros are defined in the GOLDKEYS.CFG file, where you can also find
        several examples.
        
        By using the word "Auto" as <assignment-key>, you can even define a
        special macro which will be automatically executed when you start
        GoldED.
        
        
        Keystacking is a special form of auto-macros. You simply specify a
        bunch of keys to be "stacked" in the (special internal) keyboard
        buffer for sequential execution.
        
        You can either specify a default set of keystacking in the .CFG
        configuration file, or override any default keystacking by typing the
        keystack definitions at the GoldED commandline or the GEDCMD
        environment variable.
        
        See the Key Reference chapter for a list of the key symbols you can
        use in macros and keystacking.
        














        ______________________________________________________________________
                                                                              
        Macros and Keystacking                      GoldED Reference, Page 126
                                                                              
        ______________________________________________________________________
                                                                              
                                     Key Reference                            
        ______________________________________________________________________
                                                                              
        
        Below is the list of key symbols recognized by GoldED for
        keyboard/macro definition and keystacking.
        
        Unshifted function keys
        
            F1  F2  F3  F4  F5  F6  F7  F8  F9  F10  F11  F12
        
        Shift-function keys
        
            #F1  #F2  #F3  #F4  #F5  #F6  #F7  #F8  #F9  #F10  #F11  #F12
        
        Alt-function keys
        
            @F1  @F2  @F3  @F4  @F5  @F6  @F7  @F8  @F9  @F10  @F11  @F12
        
        Ctrl-function keys
        
            ^F1  ^F2  ^F3  ^F4  ^F5  ^F6  ^F7  ^F8  ^F9  ^F10  ^F11  ^F12
        
        Alt-Numbers
        
            @0  @1  @2  @3  @4  @5  @6  @7  @8  @9
        
        Alt-Letters
        
            @A  @B  @C  @D  @E  @F  @G  @H  @I  @J  @K  @L  @M
            @N  @O  @P  @Q  @R  @S  @T  @U  @V  @W  @X  @Y  @Z
        
        Ctrl-Letters
        
            ^A  ^B  ^C  ^D  ^E  ^F  ^G  ^H  ^I  ^J  ^K  ^L  ^M
            ^N  ^O  ^P  ^Q  ^R  ^S  ^T  ^U  ^V  ^W  ^X  ^Y  ^Z
        
        Insert/Delete
        
            Ins  ^Ins  @Ins
            Del  ^Del  @Del
        
        Home/End
        
            Home  ^Home  @Home
            End   ^End   @End
        
        Page up/down
        
            PgUp  ^PgUp  @PgUp
            PgDn  ^PgDn  @PgDn
        
        Cursor left/right
        
        ______________________________________________________________________
                                                                              
        Key Reference                               GoldED Reference, Page 127
                                                                              
            Left   ^Left   @Left
            Right  ^Right  @Right
        
        Cursor up/down
        
            Up    ^Up    @Up
            Down  ^Down  @Down
        
        Misc other keys
        
            Esc  ^Grey*  Key5  Space  Tab  #Tab  @Tab  BackSpace  ^BackSpace
            @BackSpace  Enter  ^Enter  @Enter
        
        Note that some of the Alt-keys, especially the cursor-related keys and
        the F11/F12 keys, are "extended" keys normally only available on
        systems with an extended keyboard bios. However, GoldED uses a few
        tricks to make some the extended keys available on non-extended
        systems.
        





































        ______________________________________________________________________
                                                                              
        Key Reference                               GoldED Reference, Page 128
                                                                              
        ______________________________________________________________________
                                                                              
                                  Language Definition                         
        ______________________________________________________________________
                                                                              
        
        GoldED allows you to almost completely redefine the language dependent
        text in the program.
        
        The language dependent text in GoldED is defined in the plain ASCII
        text GOLDLANG.CFG file.
        
        See the example language file for the actual method and format of
        language redefinition.
        
        If you are planning to translate the text in GoldED, you should also
        look into the definition of the help screens.
        
        You do not need permission from the author before announcing or
        distributing your own modified language files.
        
        
        Date/Time Substitution Codes
        
        A few of the language texts can contain special date/time substitution
        codes. The keywords for those are: MS_DateTimeFmt, MS_DateFmt,
        MS_TimeFmt and ST_StatuslineTimeFmt.
        
        Here are the valid substitution codes:
        
          %a  Abbreviated weekday name (Mon, Tue, Wed, ...).
          %A  Full weekday name (Monday, Tuesday, Wednesday, ...).
          %b  Abbreviated month name (Jan, Feb, Mar, ...).
          %B  Full month name (January, February, March, ...).
          %d  Day of month (01-31).
          %e  Day of month, with leading space for single digits (1-31).
          %E  Day of month (1-31).
          %H  Hour (00-23) (24-hour clock).
          %I  Hour (01-12) (12-hour clock).
          %j  Day of the year (001-366).
          %m  Month (01-12).
          %M  Minute (00-59).
          %p  AM or PM according to 12-hour clock.
          %S  Second (00-59).
          %U  Week number (00-52) where sunday is first day of the week.
          %w  Weekday (0-6) where 0 is sunday.
          %W  Week number (01-53) where monday is first day of the week.
          %y  Year without century (00-99).
          %Y  Year with century.
          %%  Character '%'.
        
        The %a, %A, %b and %B codes substitute to the current language setup
        loaded using the LOADLANGUAGE keyword.
        
        
        *** NOTE ***
        ______________________________________________________________________
                                                                              
        Language Definition                         GoldED Reference, Page 129
                                                                              
        
        
        In the continuing development of GoldED, it is impossible to
        completely maintain backward compatibility of the language format or
        the text defined there. New features may add and/or obsolete some
        definitions, or may change the format of others.
        
        The existing language file may contain definitions which are already
        obsolete, but which I haven't had time to search for and remove, as
        well as there may be some texts in GoldED which are not yet definable.
        All this will of course be corrected in future versions. If you find
        inconsistencies, please report them, because I may have overlooked
        them.
        










































        ______________________________________________________________________
                                                                              
        Language Definition                         GoldED Reference, Page 130
                                                                              
        ______________________________________________________________________
                                                                              
                                 Message Kludge Lines                         
        ______________________________________________________________________
                                                                              
        
        Kludge lines are special control lines, that begin with a ^a (ASCII 1)
        as the first character of the line, followed by a unique identifying
        name and the relevant control information.
        
        GoldED is aware of a lot of these kludges, and supports a number of
        them, if you want to have them inserted in your messages.
        
        Some kludges are useless junk and more or less commercials for this
        and that software, but a few are useful for miscellaneous purposes. In
        the following, I will list (some of) the known and supported kludges,
        and a short description of what they are used for.
        
        ACUPDATE:
        
            This kludge is a feature of Squish 1.10: Message Broadcast
            Modify/Delete. Read the docs for Squish 1.10 for details.
        
        AREA:<echoname>
        
            This is not really a kludge, and it doesn't begin with a ^a, but I
            included it on the kludge list because it sometimes turned up in
            echomail areas where it should have been stripped off by the mail
            tosser.
        
        CC: <name> <address>
        
            When GoldED produces carbon copies, it adds to each message a full
            list of the persons who get a copy. One version of this list is
            hidden behind the CC: kludge.
        
        CHARSET:<charset identifier>
        
            Proposed in FSC-0050 and FSC-0054, this kludge is an attempt to
            find a solution to the problem of the high-bit characters (like
            the IBM PC vs Amiga vs Mac etc. national chars) in messages.
            GoldED can recognize, use and generate this kludge.
        
        CHRC:<font change id>
        
            Proposed in FSC-0054, this is a kludge for changing fonts,
            underlining and other stuff.
        
        CHRS:<charset identifier>
        
            Alternative FSC-0054 version of the CHARSET kludge.
        
        DESTADDR:<destaddress>
        
            This one is not proposed anywhere, but it looks like it gives the
            address of the intended recipient. GoldED takes the address for
        ______________________________________________________________________
                                                                              
        Message Kludge Lines                        GoldED Reference, Page 131
                                                                              
            the dest field.
        
        DOMAIN <destdomain> <destaddress> <origdomain> <origaddress>
        
            Proposed in FSC-0038, this tries to solve the problem of mail
            crossing domain boundaries. GoldED takes both addresses.
        
        EID:<crc16> <stamp> [replycrc16] <replystamp>
        
            Proposed in FSC-0031, this is used for dupe checking and reply
            linking. The EID is today generally considered as garbage, but a
            lot of older mail processors such as QMail still generate it.
        
        ENC:
        
            Signifies that the message contains encrypted data. GoldED will
            add this kludge if it detects that the message has been encrypted
            with PGP.
        
        EOT:
        
            End Of Text. See SOT.
        
        FLAGS <special attributes>
        
            Proposed in FSC-0053, this is a special netmail kludge used by the
            FrontDoor and D'Bridge mailers and the IMail mail processor. It
            provides extra attributes not found among the standard attributes
            in the normal message/packet headers. GoldED uses and generates
            this kludge, if you set the attributes.
        
        FMPT <from point>
        
            Defined in FTS-0001, this tells the Point number of the
            originator. Netmail only. GoldED can generate this line.
        
        FWDAREA <original area>
        
            FSC-0092: The original area in forwards. See USEFWD and FSC-0092
            for a more detailed description.
        
        FWDDEST <aka>
        
            FSC-0092: The original To-aka in forwards. See USEFWD and FSC-0092
            for a more detailed description.
        
        FWDFROM <name>
        
            FSC-0092: The original From-Name in forwards. See USEFWD and
            FSC-0092 for a more detailed description.
        
        FWDMSGID <aka serial#>
        
            FSC-0092: The original MSGID in forwards. See USEFWD and FSC-0092
            for a more detailed description.
        
        ______________________________________________________________________
                                                                              
        Message Kludge Lines                        GoldED Reference, Page 132
                                                                              
        FWDORIG <aka>
        
            FSC-0092: The original from-aka in forwards. See USEFWD and FSC-0092
            for a more detailed description.
        
        FWDSUBJ <original subject>
        
            FSC-0092: The original subject in forwards. See USEFWD and FSC-0092
            for a more detailed description.
        
        FWDTO <name>
        
            FSC-0092: The original TO-field in forwards. See USEFWD and FSC-0092
            for a more detailed description.
        
        GATECHK:<???>
        
            Some sort of gating kludge?  Don't know what it's for.
        
        GIF:<filename>
        
            Invented by Henk Wever and used in his Dutchie software. The
            filename (which does not have an extension) indicates a .GIF
            picture of the author of the message. If you have the GIF file on
            your system, you can setup an external utility to view the gif at
            the press of a key.
        
        GROUP:<echoname>
        
            I think this one comes from stray Groupmail messages. Similar to
            the AREA: kludge.
        
        I51 (no parameters)
        
            Proposed in FSC-0051, this indicates that the message text
            conforms to the ISO 8859-1 (LATIN-1) character set, and may
            contain certain escape codes. The ISO 8859-1 set is used in Amiga
            and Windows 3.xx. GoldED can recognize, use and generate this
            kludge.
        
        INTL <destaddress> <origaddress>
        
            Defined in FTS-0001, this one solves the problem of crossing Zone
            boundaries. Netmail only. GoldED can generate this line.
        
        MSGID: <origaddress> <serialno>
        
            Defined in FTS-0009, this is a method for unique identification of
            a message. It can be used for dupe checking and replylinking.
            GoldED can generate this line.
        
        MSGTO: <destaddress>
        
            This one is not proposed anywhere, but it looks like it gives the
            address of the intended recipient. GoldED takes the address for
            the dest field.
        ______________________________________________________________________
                                                                              
        Message Kludge Lines                        GoldED Reference, Page 133
                                                                              
        
        Original: <Carbon copy, original name>
        
            Generated by the FrontDoor FM editor when it produces carbon
            copies.
        
        PATH: <list of nodes>
        
            Defined in FTS-0004, this is a valuable tool for finding dupe
            links and other structural faults in the net structures.
            Unfortunately the list of nodes is 2D (net/node), and this creates
            problems when exporting echomail across zones.
        
        PTH: <list of nodes>
        
            Not yet a FSC (or is it?), this is a 5D-version of the PATH
            kludge, which sticks to the top of the msg.
        
        PID: <identifier> <version> [serialno]
        
            Proposed in FSC-0046, this takes a stab at the tearline abuse, and
            puts "safe" information about the first mail processing software
            in the line. This could be message editors, mail scanners and
            other stuff.
        
        Realname: <Name>
        
            This kludge was probably born in Russia because of some software
            was not able to properly handle high ASCII in headers. Name should
            be written in national codepage. Otherwise it lose any sence.
            I don't know any software that generate this kludge.
        
        RFD: <id>
        
            Received For Distribution. A kludge inserted by one of the file
            announcement programs.
        
        REPLY: <replyaddress> <replyserialno>
        
            Defined in FTS-0009, this is the MSGID: counterpart. When replying
            to a message with a MSGID:, the MSGID: of the original is renamed
            to REPLY:.
        
        RID:<stuff>
        
            Unknown kludge which looks suspiciously like the EID.
        
        ROUTE <list of nodes and points>
        
            Specifies route path. Currently supported by Unimail and S\Tosser.
        
        SEEN-BY: <list of nodes>
        
            Defined in FTS-0004, this is a tool for finding dupe links and
            other structural faults in the net structures. Depending on the
            mail tosser, the seen-by's may or may not have a preceding ^a
        ______________________________________________________________________
                                                                              
        Message Kludge Lines                        GoldED Reference, Page 134
                                                                              
            character. Unfortunately the list of nodes is 2D (net/node), and
            this can create problems when exporting echomail across zones.
        
        SN:<serialno>
        
            Serial number inserted by the Dutchie message editor.
        
        SOT:
        
            Start Of Text. See EOT.
        
        SPLIT:
        
            Defined in FSC-47. A method for splitting large msgs so that some
            mail processors don't choke on them.
        
        
        TCL1:, TCL2: <long hex string>
        
            Old obsolete swedish dupecheck/replylink kludge.
        
        TID:
        
            Tosser ID. Similar to the PID, but specifically for mail
            processors.
        
        TOPT <to point>
        
            Defined in FTS-0001, this tells the Point number of the
            destination. Netmail only. GoldED can generate this line.
        
        TZ <offset from UTC>
        
            Specifies the time to *add* to the header time to get the UTC
            (Universal Time Coordinated) time. Generated by newer versions of
            the TrackMail netmail processor.
        
        TZUTC
        
            See TZ. GoldED can generate this line.
        
        Via: <netmail tossing info>
        
            Routed netmail messages usually gets a Via line for each node it
            passes through. This can be used for tracing faults in the netmail
            routing structure.
        
        XID:<stuff>
        
            Unknown kludge which looks suspiciously like the EID.
        





        ______________________________________________________________________
                                                                              
        Message Kludge Lines                        GoldED Reference, Page 135
