                                    PPoint
                           Professional Point System
                      Copyright (c) 1994 Harvey Parisien
                  Box 8375, Ottawa, Ontario, Canada  K1G 3H8
                               FidoNet 1:249/114

                                Setup Questions

         1) Is this a POINT setup or QWK setup.  Choose POINT unless you
         are connecting to a QWK specific host or network.  If you do
         not know, choose POINT.

         2) Do you want a FAST setup?... Answer YES to this.  A more
         detailed setup is not necessary, and can always be modified
         later using the SETUP menu on your pulldown menus.

         3) Your First and Last name?  This will be your name as
         presented in all your outgoing mail, and the name you expect to
         receive mail to.

         4) Your point address (Zone:Network/Node{.Point}) ie: 1:20/30.1

         Enter this address:  _________________________

         5) Your BOSS ROUTE address (Zone:Network/Node).  Press ENTER to
         accept the suggested address, or enter a route address if this
         was requested by your host.

         6) Your Origin line?  This is your own personal system title
         line which shows in each message.  Press ENTER to accept the
         default, or be creative and enter something else.

         7) Your Serial Com Port?  This is the communications port your
         modem is connected to.

         8) Your Modems Baud Rate?  This should be the fastest speed
         which your modem can support (only enter valid speeds suggested
         at the prompt in this section).

         9) Your Phone line type Tone or Pulse?  Default is T.

         10) Your Host phone number?  This should be exactly the way you
         would have to dial it if it were a manual call.

         Enter this number:  __________________________

         11) Your Host session password: __________________


         Further setup parameters can be modified from your pulldown
         menus under the section called SETUP.  You might want to change
         your text editor, or identify the type of printer you are
         connected to.

         NOTE: Information on blank lines is provided by your HOST.