Subj : Ezycom & OS/2
To   : Leonard Erickson
From : Mike Tripp
Date : Thu May 15 2003 08:06 am

Hello Leonard!

15 May 03 02:57, Leonard Erickson wrote to Mike Tripp:

 LE> Well, for starters, I want Netware access to the server. And TCP/IP
 LE> connectivity to the Internet. After that, trying to get peering to the
 LE> Windows boxes working would be nice.

Great.  So your priorities were identical to mine...so try my method at least 
once:  Use the "remove" buttons to clear out all of the existing protocol and 
adapter selections in MPTS and start over by reselecting your NIC, adding "IBM 
Netware Requester support", "edit" IBM Netware Requester support to add your 
MAC address info and verify the yes/no setting for the frame-types, then select 
"IBM TCP/IP" from the protocol window,  exit/update CONFIG.SYS, reboot, and 
cross fingers.

If, for any reason, at any time, something that refers to NETBIOS, NetBIOS, 
netbios, or NETBEUI shows up in the list while you're configuring...REMOVE it 
immediately. If anything =else= from the 6 or so protocols listed shows up in 
the bottom "current configuration" window, feel free to go ahead and highlight 
it and hit "remove", too. :)

 LE> Want me to zip up some config files so you can check them for dumb
 LE> mistakes?

 LE> I can email them to you, or I can use Irex from a Windows box.

Trying to convince you that you were wasting your time in there in the first 
place is where I joined this thread... :)

Now that I'm clear that you'd be satisfied with exactly what is running here, 
try my exact method of getting there, and you have my CONFIG.SYS for 
cross-reference.

..\\ike

--- GoldED 2.50+
 * Origin: -=( The TechnoDrome )=- Austin,TX 512-327-8598 33.6k (1:382/61)

.