Subj : Ezycom & OS/2
To   : Mike Tripp
From : Leonard Erickson
Date : Sun May 11 2003 10:12 pm

 -=> Quoting Mike Tripp to Leonard Erickson <=-

 MT>> Have you tried reconfiguring the protocols with MPTS adding
 MT>> Netware first?  I seem to recall having some issues with
 MT>> coexistence if the TCP/IP was added/configured before the Netware
 MT>> myself.
 
 LE> I've got Netware working (been working for years).

 MT> I am referring to configuring the OS/2 Netware client...not the Novell
 MT> server. 
 LE> But my local OS/2 gurus don't know anything about Netware, and
 LE> none of the attempts by them or buy me get T CP/IP working.
 
 LE> One got TCP/IP working by redoing the config.sys, but with that
 LE> config.sys, Netware won't work.

 MT> Trying to get there by hacking CONFIG.SYS is definitely "the hard
 MT> way", particularly for a multiprotocol setup.  You can have all the
 MT> correct statements but in the wrong sequence (including
 MT> out-of-sequence with other non-networking-related lines) and still not
 MT> get there from here.  You may end up needing to know the differences
 MT> between ODI vs NDIS and shims between, Netware-specific PROTOCOL.INI
 MT> statements, edit NIC-specific .NIFs, etc.  If your gurus don't have
 MT> Netware experience, they will probably not be guru enough for this
 MT> particular approach to this particular exercise. 

Well, according to MPTS I've *already* got TCP/IP installed. 

[E100BODI].....
        0 - IBM OS/2 NETBIOS
        2 - IBM Netware Requester Support
        1 - IBM TCP/IP

So according to you, I should change the numbers on the last two?

--- FMailX 1.60
 * Origin: Shadowgard (1:105/50)

.