Subj : Possible bug
To   : g00r00
From : Michael Pierce
Date : Mon Sep 28 2020 09:18 pm


 gr> The default address (1:1/0) sounds like it could be related to the
 gr> thing we're talking about here so its probably a good idea to get that
 gr> resolved.  If SBBS gets an address from the origin line, then it'd
 gr> probably end up with some reasonable default like 1:1/0 if no address
 gr> was there.
any idea on when A47 for RPI will be available the setup was working in previons versions ..

 gr> As far as the rest there are some many things that could be wrong
 gr> there, including if someone is using old versions or has an
 gr> ill-configured netmail route (also could be a bug too).  Not sure
 gr> where to begin so I think making sure the address is on the origin
 gr> line is a good start.
will tell him to try that - and report back

 gr> I personally host a point system on SCINET, and they are able to send
 gr> netmails throughout when we tested it.  Netsurge confirmed all of the
 gr> addressing in the netmails produced from Mystic match the same when
 gr> they are generated by HPT (the Husky tosser) too.  This was several
 gr> months ago though.

could/would you update to the latest A46 on that RPI see if it still
works for you. ???

yes when we brought the issue to you and Rob S.
This only seems to happen on the RPI version..

I am back to running on my desktop - my setup is different - linux64
- I do have my netmail areas seperated and my build works -  I can only relay the info

Michael


--- GoldED+/LNX 1.1.5-b20180707
 * Origin: Mike's Mansion - Portland, OR - mansion.dynv6.net:2323 (1:340/201.2)

.