Subj : For Sale Nel Tech Labs DVK-100 Digital Voice Keyer
To   : All
From : Al Kaiser
Date : Sun Apr 08 2001 12:53 am

Digital Voice Keyer /w Manual.  Requires a 12 V wall supply or connect to
any 12 VDC source.

You will need to build a patch from your microphone to the DVK-100 and a
patch to your radio from the DVK-100.  This will require two 8 pin DIN
plugs and the mating connectors to your radio and microphone.  There is
also a jack to build an external keyboard instead of using the buttons
on the DVK-100.  The manual manual gives wiring instructions for some
radios including ICOM 730, 740, 720 751, 745, Kenwood 430, 930/40, 830,
530, and Yaesu 980, FT One, 102, 77, 101ZD, 902DM.  Others could probably
use the block diagram to figure out connections for their radios.

I used this with my TS-940 S and have the interfaces that I used with the
Kenwood and my MC-60 microphone.  I will include these if you want so this
unit is plug and play for KENWOOD TS-940S and those radios wired alike.  I
will also include an MFJ monitor speaker, (even if you don't want the
Kenwood setup).

DVK-100 features 4 messages each, 1 - 16 second, 1 - 8 second, and
2 - 4 second.  You can record / check off air / and play on air.  Also
features an onboard processor, (non adjustable), monitor off / on, repeat
play, and, (why I don't know), roger beep on / off.

Note: If you use a microphone such as the MC-60 you need to put a battery
in the microphone when connected to the DVK-100 or perform the internal
modification to the DVK as specified in the manual  I found it easier to
put a battery in the microphone when I used it rather then modify the
DVK.  If you use a non amplified microphone the setup is straight through.

Price $ 85.00 plus shipping or BO.  Mail to my email address of
n1api@home.com

-73-  Al  N1API


-=>  Al Kaiser  n1api@home.com <=-

.... E = mcý ñ 2 dB
~~~ Tag-O-Matic V.13F (743 Taglines) (Quoted 1%) Owned by Al Kaiser

--- Terminate 5.00/Pro 
 * Origin: A Terminate a day keeps the doctor away ;-) (1:109/921.71)

.