Subj : Re: mis poll not polling
To   : freq
From : deon
Date : Sun Nov 02 2025 01:56 pm

  Re: Re: mis poll not polling
  By: freq to deon on Sat Nov 01 2025 01:39 am

Howdy,

 >  de> Increase the log level, it should provide more useful information.
 >
 > I ran the log level on 1, 2 and 3.  they all gave same output

So I didnt see the information that I expected with loglevel 3.

Here is an example of something that I played with about a month ago.

---------------------  POLL v1.12 A48 2023/01/15 Wed, Oct 01 2025 (loglevel 3)
+ 2025.10.01 22:37:16  Poll BINKP node via address lookup: 10:999/1
+ 2025.10.01 22:37:16  1-Polling 10:999/1 on slot 1 via BINKP
+ 2025.10.01 22:37:16  1-DEBUG ConnectMode=0
+ 2025.10.01 22:37:16  1-Connecting to 172.31.20.48 on port 24554
+ 2025.10.01 22:37:16  1-Using address 172.31.20.48
+ 2025.10.01 22:37:16  1-Connected by IPV4 to 172.31.20.48
+ 2025.10.01 22:37:16  1-S: NUL SYS New Mystic BBS
+ 2025.10.01 22:37:16  1-S: NUL ZYZ Sysop Name Here
+ 2025.10.01 22:37:16  1-S: NUL TIME Wed, 01 Oct 2025 22:37:16 0000
....
+ 2025.10.01 22:37:17  1-Mailer clrghouz/dev binkp/1.1
+ 2025.10.01 22:37:17  1-R: ADR 10:999/900.0@private 10:999/0.0@private
+ 2025.10.01 22:37:17  1-S: PWD
+ 2025.10.01 22:37:17  1-R: ERR You must support MD5 auth to talk to me
+ 2025.10.01 22:37:17  1-Authorization failed
+ 2025.10.01 22:37:18  Polled 1 systems

IE: Your log didnt show the "Using address...", nor the reason for the failed session.

If your loglevel 3 still shows the same output, then I would suggest your mystic is not resolving addresses (which is the next item in the log, that I see in my log, but not in yours).


....лоеп
--- SBBSecho 3.29-Linux
 * Origin: I'm playing with ANSI+videotex - wanna play too? (21:2/116)

.