Subj : Re: Accessing my board
To   : hbag
From : SirRonmit
Date : Mon Jul 17 2023 04:13 pm

 hb> Thanks in advance for any help.

CONFIG: SERVERS:
ACTIVE (YES)
ID (TELNET)
IPV4 ADAPTER (the IP of the LAN for this PC/install - IFCONFIG for linux or IPCONFIG for windows)
PORT (23 is default / others may run 2323 or 62323 like myself)

After you confirm that, then your local telnet program (NetRunner for example) needs to access IPV4 ADAPTER (and the port if not 23)

eg. lets say your local mystic is on a PC who's IP is 192.168.1.68 and you are using the default PORT (23).
than NetRunner will DIAL 192.168.11.68 or even 192.168.11.68:23

if you are attempting to access from the outside world (aka Internet), then you must also make sure you have a port forward from your internet provider on the router/modem .. create a port forward to that IP (192.168.11.68) for TELNET (port 23).

--- Mystic BBS v1.12 A48 (Windows/32)
 * Origin: Files 4 Fun BBS (21:2/120)

.