Subj : Mailer and front end...
To   : Shurato
From : Shurato
Date : Thu Oct 03 2024 06:27 am


 Sh> de> Re: Mailer and front end...
 Sh> de> By: Shurato to deon on Wed Oct 02 2024 09:22 pm

 Sh> de> Howdy,

 Sh> de> > My mail tosser uses domain.hex as the directory name, in the
 Sh> directory
 Sh> de> above
 Sh> de> > the specified outbound directory.  I've put zone 1 for everything
 Sh> now.
 Sh> de> I
 Sh> de> > think this is working, but I'm not positive.

 Sh> de> OK, if your toss is using "domain.hex", then the instructions that
 Sh> vorlon
 Sh> de> and I are giving you are not appropriate, and they are for a
 Sh> different
 Sh> de> situation.

 Sh> de> If your tosser is putting mail into a directory that has both the
 Sh> domain
 Sh> de> and hex name, eg: fsxnet.015, fidonet.001, amiganet.027, etc, then
 Sh> you
 Sh> de> *will* need to use the configuration that you originally had - but
 Sh> you
 Sh> de> need to use the correct directory with it.

 Sh> de> ie: something like

 Sh> de> domain fidonet c:\\ele\\irex\\outbound\\fidonet.001 1 domain Araknet
 Sh> de> c:\\ele\\irex\\outbound\\araknet.00a 10 domain fsxnet
 Sh> de> c:\\ele\\irex\\outbound\\fsxnet.015 21 domain micronet
 Sh> de> c:\\ele\\irex\\outbound\\micronet.26a 618

 Sh> de> (I think anyway - I've never had a tosser that works this way).

 Sh> de> The only problem when I can think of might be fidonet (since it uses
 Sh> zones
 Sh> de> 1-4), so you might need to have \\fidonet 32767, which should still
 Sh> see
 Sh> de> stuff for zone 1 in \\fidonet.001, and zone 3 \\fidonet.003, etc

 Sh> de> If the above doesnt work correctly, then this might be better

 Sh> de> domain fidonet c:\\ele\\irex\\outbound\\fidonet 32767 domain Araknet
 Sh> de> c:\\ele\\irex\\outbound\\araknet 32767 domain fsxnet
 Sh> de> c:\\ele\\irex\\outbound\\fsxnet 32767 domain micronet
 Sh> de> c:\\ele\\irex\\outbound\\micronet 32767

 Sh> de> YMMV :)

 Sh> It's working!  The only problem is that my exec command is not running
 Sh> when inbound packets are encountered. It was before, but I broke
 Sh> it some how.  I could just schedule between.bat to run hourly.

 Sh> exec "@start /min c:\\ele\\irex\\between.bat"
 Sh> c:\\ele\\irex\\inbound\\*.pkt exec "@start /min
 Sh> c:\\ele\\irex\\between.bat"
 Sh> c:\\ele\\irex\\inbound\\*.[mwtfs][oehrau][0-9a-zA-Z]


I've got my delays set to 1h.

call-delay 1h
rescan-delay 1h

--
Shurato, Sysop Shurato's Heavenly Sphere (ssh, telnet, pop3, ftp,nntp,
,wss) (Ports 22,23,110,21,119,8080) (ssh login 'bbs' pass 'shsbbs').


*** THE READER V4.50 [freeware]
---
 * Origin: Shurato's Heavenly Sphere telnet://shsbbs.net (21:2/148)

.