Subj : RAR
To   : Benny Pedersen
From : Gert Andersen
Date : Thu Mar 03 2016 07:16 pm

 * Reply to message originally in area CarbonArea

Hello Benny!

Tue Mar 01 2016, Benny Pedersen wrote to Gert Andersen:

Well then is my fido2 got in the first error again where kernel or gentoo not 
is reading the net.lo file in /etc/init.d/ as it shall and all of its 
networking is dead.
I took the net.log file on fido1 and copy it as root to another path directory 
and here run zip netlo.zip and put this file on fido1 filbox dire for fido2 as 
/filebox/2:230.152/ and with fido2 mbse polled fido1 2:230/150 and got it over 
on fido2 pc and move netlolo.xip out to /home/ and then delete the bad and 
wrong net.lo file then got the net.lo file in netlo.zip copied out and copies 
in to /etc/init.d/ then reboot the pc and then was the net.lo file not right 
read as before by the first problem end up.
There may be some with the kernel or by gentoo reading init files for the 
network.
I think there is a last ting I maybe can do there is to find the livecd der got 
intalled fido2 gentoo and use this for checking fido files bty go the way to I 
has chroot from cd to it is harddisk.


 GA>>>> It is not the rule file for it by it is in /etc/init.d/ the net.lo 
 GA>>>> and net.eth0 give problems by gentoo fido2 not read the networkd 
 GA>>>> ethnet files as it shall. By more that the net.lo file have some 
 GA>>>> problems to work with thet other net.eth* files

 BP>>>why do you ask me about help if you dont listen ?

 GA>> I listen to you but the problem was not that the net rule file not 
 GA>> working it was that the interfaces not got startup and it got to look 
 GA>> like it there was either the kernel there not got read the net.* as it 
 GA>> should so it not got load and start net.lo net.eth0 and net.eth1

 BP>you know what ?, your problem is to listen to when other say whats the 
 BP>problem(s) is, its not a single problem you have its more then one, i 
 BP>started with telling what to do first, and then you can tell me why you 
 BP>edit net.lo file, dont ever do that !

 GA>> After several tries with the sysrescuecd cdrom startup was it not the 
 GA>> netcards or the others, by sys rescue find and startup the netcard but 
 GA>> with the new names and when I tried to use and try out using the 
 GA>> harddisk boot read sda3 configs sda1 as the cdrom sys rescue was it on 
 GA>> the harddisk sda3 net files there seem to have errors in it for the 
 GA>> network by right reading the net.* files.

 BP>there is NOTHING to recover so that why it does not work to use 
 BP>systemresque cd 

 GA>> When I then testing the net.* files and move the net.lo to another tmp 
 GA>> path and reboot was it like there seem to something got begin to work 
 GA>> and by just copy net.eth0 to a net.lo file got the netcards to startup 
 GA>> but some is still missing by boot up as there is nothing show on the 
 GA>> monitor of the ip adresses.

 BP>net.eth0 is a symlink to net.lo, you must still NOT edit the file

 BP>>>stop wasting your time

 BP>maybe i should listen to my own advise ?


 BP> Regards Benny

 BP>... there can only be one way of life, and it works :)

 BP>-+- Msged/LNX 6.2.0 (Linux/4.4.3-gentoo (i686))
 BP> + Origin: openvpn on its way here (2:230/0)


  Take care,
            Gert

      - Get the best with linux - 

--- Msged/LNX 6.2.0 (Linux/2.6.39-gentoo-r1 (x86_64))
 * Origin: * The KofoBBS at http://www.kofobbs.dk * (2:230/150)

.