Subj : fe 1.46 To : Bill Gordon From : mark lewis Date : Mon Jul 26 2004 09:28 pm >> i don't know what supposed horror stories you've heard >> but i'm not aware of any... i've run every version since >> FE was released and have never had any problems that >> weren't self induced... v1.46 is very stable and there >> was only one fix needed for it and that only if you run >> in a binkley type setup... BG> Thanks, Mark, I think the horror stories I heard were, indeed, BG> about binkley type mailers. if they were concerning v1.46, they should have been shortlived... one thing that i do know is that the BSO format can be problematic if one doesn't take into account what their default zone is and also doesn't take into account that zone numbers are represented in HEX... BG> I was running binkD, but finally figured how to configure BG> Radius, another binkley type mailer. yes, i run it here on one of my test/point systems but not with FE (yet)... BG> I have been using 1.45 for so long that I wonder if it's worth BG> moving to 1.46. since this version has been out as long as it has, i'd say that it is quite safe to update to it... you shouldn't have any problems once everything is in place and updated properly... i went thru several upgrade routines and have never had any problems... i don't see/remember anything like a changelog but here's the whatsnew file for v1.46pl1 (that's pee ell one, the bink bug patch)... Changes since FastEcho 1.45a ============================ Version 1.46pl1, 03 Apr 1997 ---------------------------- Small patch #1 * FastEcho PACK -P for Binkley-style outbounds was ignoring "priority" NetMail messages which had ^aFLAGS like DIR, IMM and others unless they were InTransit, fixed Version 1.46, 01 Apr 1997 ------------------------- Late Easter Update * including OS/2 and DOS/32 versions of FESetup using the Watcom C++ compiler, DOS/32 FastEcho and FEUTIL versions (replacing the /16 ones) can be expected once they got ported to Watcom as well * added support for 6 more groups 1-6 and a maximum of 4096 areas * AreaFix is now able to send the rules of newly linked areas to the requesting system based on *.RUL files with a definable "Rule file area tag prefix" for .RUL files not following the current standard supported by FastEcho (as used at least in Germany). FastEcho will parse the files for a line starting with that prefix being followed by the name of the area * added "delete area" (~AREA) and "rename area" (#OLD NEW) commands to AreaFix, changes can be automatically forwarded to your downlink's AreaFix (or as a human readable information message) * you can now disable the forwarding of AreaFix requests for single systems, see Node Manager for the new "AreaFix flags" settings * added a deny list to the forward AreaFix section which includes names (wildcards allowed) of areas which may never be forwarded even if found in the specified list * added option to tell AreaFix not to set forwarded areas to Passthrough and rather use the Storage method defined in the corresponding Group Defaults * added FastEcho RELINK command to send AreaFix requests to selected systems or all your uplinks requesting all areas for which the systems are active * now creating a FEPACK.REC file for recovery when FastEcho is inter- rupted while archiving ARCmail (hang), on the next run it will look for this file and rename the .PKTs found in there back to .QQQ to process them again, also cleans up the mailer's busy semaphore file plus a temporary list file (usually FETMP*.*) found in there, FEPACK.REC is stored either in a directory SET FETMP= is pointing to, or in your TMP/TEMP or the current directory (due to the nature of that file it's suggested not to place it on a ramdisk) * expanded ARCmail pack priority from Y/N to a 4-level setting, 0 being the lowest, 3 the highest, so ARCmail for systems with a level of 3 will be compressed first, then level 2 and so on * added "Minimum packet size" setting to specify a value below which inbound EchoMail packets will be skipped (check the Help text for more details) with FEOPT=NOLIMIT or TOSS /NOLIMIT to disable the checking of the "Minumum packet size" for the current run. Packets containing NetMail will be tossed in any case * added error reporting via NetMail (can be disabled with SET FEOPT= NOERREP) * now supports stripping of SEEN-BY info for outbound out-of-zone EchoMail messages (additionally to the stripping when acting as an inbound zonegate), by default disabled (because it's slower) can be enabled with SET FEOPT=ZONEGATE * added -S switch to FastEcho STAT command to suppress the system's statistics thus create an area-only statistics * AreaFix is now able to understand the '=area' command correctly, which makes it able to perform a rescan for all linked areas with '=*' without adding any new areas * added 2 new AreaFix meta commands, %EXPORT and %NOEXPORT, to turn export by name on/off (mostly used in conjunction with %PASSIVE) * now allowing local AreaFix requests written locally with a FROM: line in them, you have to add a system using the used AKA to the Node configuration * AreaFix will no longer include a list of all linked areas in the receipt message if the request message has the PGM (program generated) ^aFLAGS * AreaFix now stops processing a request when it encounters %QUIT or "-- " (as internet signature start) * When %AVAIL is requested and no forward lists are entered in FESetup, AreaFix will respond with a receipt showing a proper error message * FastEcho TOSS: added new setting 'H' = Hide for Keep Seen-By (in addition to 'Y' and 'N') to have the seen-by info hidden as a kludge * FastEcho TOSS: the dupe checker is now ignoring short (and thus invalid and most likely duplicate) MSGIDs (like "^aMSGID: fae"), only MSGIDs longer than 14 characters will be used for dupe checking * FastEcho TOSS -C does no longer make carbon copies of messages tossed to your BadMail area * FastEcho TOSS: changed the code handling the check for used space on the temporary outbound drive slightly * FASTECHO TOSS is no longer stripping DIR/IMM FLAGS from incoming NetMail messages * FEOPT NOPACK is no longer honored if FastEcho TOSS is forced to compress the outbound .QQQs when one of the preset limits is reached * FastEcho SCAN: now resolving the paths in ECHOMAIL.JAM when comparing them to the paths of the areas (truename function), can be turned off with SET FEOPT=NORES or SCAN /NORES * FastEcho SCAN: now only logging ONCE if a message in a JAM/Squish/ .MSG area couldn't be exported, instead of doing that for every message * FastEcho SCAN JAM NetMail export now properly supports the way JAM can store File attaches and requests * added ^aFLAGS NPD and PGM for JAM EchoMail in TOSS and SCAN and for JAM NetMail export, same for FEUTIL POST (to all messagebase types) as well as Netmail messages created by FastEcho * FastEcho PACK does now ignore "unknown" ^aFLAGS (instead of not packing NetMail messages with these flags as earlier versions), added support for the DNP (Do Not Pack) flag, also NetMail messages having the HUB flag will not be packed unless they are InTransit * FastEcho PACK -P does now properly handle FileRequests with password (subject "file !pw") * when packing priority NetMail for Binkley-style mailers, FastEcho PACK should now handle otherdomain outbound directories better for out-of-own-zone mail (ie. it will use the domain defined for the AKA which matches the sender's zone, you probably will have to tell your mailer which zones that are not covered by one of your AKAs belong to which domain) * FASTECHO PACK will now pack NetMail messages which have the IMM/DIR/ CRA/HLD/FRQ FLAGS set but are InTransit (non-local), same for messages with KFS/TFS flags but without a FileAttach flag * automatic passive for systems didn't work if an ARCmail address different from the main address was used and no other system was listed having this address as main address * automatic passive will now set all systems which have the same ARCmail address as the new passive one to passive as well * you can now use $[COMSPEC] (or any other macro instead of the program name) for any external programs, previously no macro expansion was supported * FastEcho will now also look for other executables (like the packer) in the directory where .EXE is located * the 'list' file for packer calling is now created in the TEMP or TMP directories (if SET) * FDRESCAN.NOW is now created in every *.MSG directory in which changes are performed (only if your mailer is Frontdoor, of course) * fixed a bug in the ROUTE.FE parser which assumed a wildcard for all points when you do a "Direct z:yyy/xxx" (which was translated to z:yyy/xxx.* instead of z:yyy/xxx.0) * fixed a little problem with very large arcmail bombs where the pack ratio wasn't calculated correctly * fixed FastEcho SCAN calculating a different dupe CRC than the TOSS routine, thus causing messages, which were written locally not being detected as dupes by FastEcho TOSS * fixed a problem with AreaFix %LIST not properly formatting some comments * fixed Carbon Copies to JAM Echomail areas not getting the Local flag and thus not being exported by SCAN * fixed some LZH archive parsing problems * fixed auto-area-create not expanding macros for the messagebase directories found in the Group defaults * FastEcho TOSS did not always return proper error codes (such as when the HMB was too big), fixed * FastEcho was opening the .CFG in DENYALL instead of DENYWRITE mode, fixed * now supporting /? additionally to ? on the command line to show the usage screens * added -G switch to FESETUP -XA, -XE and -X$ to have only areas belonging to certain groups exported * added support for GEcho 1.20 and FMail 1.22 import to FESetup * FESetup: when creating a new FASTECHO.CFG the De/Compression program defaults will be copied copied without having to enter the De/Compr. programs menus * FESetup was not resetting the 'Passive' flag when a passthrough area was changed to a different storage type, thus these areas (even though not really passive) were not included in the AreaFix lists * speeded up FEUTIL2 JAM LINK quite a lot * FEUTIL IMPORT does no longer store FMTP/TOPT/INTL as JAM subfields * FEUTIL JAM POST is now correctly updating ECHOMAIL/NETMAIL.JAM * FEUTIL POST did not expand the macros in the paths of FIDO and JAM areas, fixed * lots of other smaller fixes and cosmetical changes )\/(ark * Origin: (1:3634/12) .