Subj : defnode
To   : Kees van Eeten
From : Alan Ianson
Date : Thu Aug 18 2016 04:20 pm

Thursday August 18 2016 23:58, you wrote to me:

 AI>> I've got something wrong here that only shows itself when I add
 AI>> "defnode *" to my binkd.conf. Instead of polling
 AI>> 1:2320/100@fidonet (for example) it tries to poll
 AI>> 1:2320/100@agoranet and that fails because that node doesn't have
 AI>> such an aka. It does the same for the other zones I have here
 AI>> also.

 AI>> binkp.net does work here as expected.

 KE>  You will have to reajust your expectations.

I need to adjust something I think but I am not sure what.

 KE>  The following line should be in your config file.

 KE> -------------------------------
 KE> #
 KE> # Overrides root domain for DNS lookups, see `node' below.
 KE> #
 KE> root-domain binkp.net
 KE> -----------------

That is there and does work, as long as I leave "defnode *" commented out in my
 binkd.conf.

I just polled your node twice. The first time I had "defnode *" uncommented in
my binkd.conf. This is what the log says.


==== Begin "binkd1.log"  ====

  18 Aug 16:16:26 [31700] BEGIN, binkd/1.0.5-pre5/Linux -pP2:280/5003
/usr/local/etc/binkd.conf
? 18 Aug 16:16:26 [31700] Cannot find domain for zone 2, assuming 'fidonet'
  18 Aug 16:16:26 [31700] creating a poll for 2:280/5003@fidonet (`d' flavour)
  18 Aug 16:16:26 [31700] clientmgr started
  18 Aug 16:16:27 [31700] 2:280/5003@dorenet busy, skipping
+ 18 Aug 16:16:27 [31701] call to 2:280/5003@agoranet
  18 Aug 16:16:27 [31700] 2:280/5003@fidonet busy, skipping
  18 Aug 16:16:27 [31702] 2:280/5003@cybernet busy, skipping
  18 Aug 16:16:27 [31700] 2:280/5003@fsxnet busy, skipping
  18 Aug 16:16:27 [31700] 2:280/5003@ilink busy, skipping
  18 Aug 16:16:27 [31700] 2:280/5003@micronet busy, skipping
  18 Aug 16:16:27 [31700] 2:280/5003@sportnet busy, skipping
  18 Aug 16:16:27 [31700] 2:280/5003@survnet busy, skipping
  18 Aug 16:16:27 [31700] 2:280/5003@wwivftn busy, skipping
  18 Aug 16:16:27 [31700] rc(31702)=0
  18 Aug 16:16:27 [31701] trying 84.106.181.21...
  18 Aug 16:16:27 [31701] connected
+ 18 Aug 16:16:27 [31701] outgoing session with
546AB515.cm-12-3c.dynamic.ziggo.nl [84.106.181.21] (24554)
- 18 Aug 16:16:29 [31701] OPT CRAM-MD5-756aa597533738bfc2f0141f75d52bee
+ 18 Aug 16:16:29 [31701] Remote requests MD mode
- 18 Aug 16:16:29 [31701] SYS Double Dutch
- 18 Aug 16:16:29 [31701] ZYZ Kees Van Eeten
- 18 Aug 16:16:29 [31701] LOC Heerhugowaard, The Netherlands
- 18 Aug 16:16:29 [31701] NDL 115200,TCP,BINKP
- 18 Aug 16:16:29 [31701] TIME Fri, 19 Aug 2016 01:16:29 +0200
- 18 Aug 16:16:29 [31701] VER binkd/1.1a-94/Linux binkp/1.1
+ 18 Aug 16:16:36 [31701] addr: 2:280/5003@fidonet
+ 18 Aug 16:16:37 [31701] addr: 2:280/0@fidonet
? 18 Aug 16:16:37 [31701] called 2:280/5003@agoranet, but remote has no such
AKA
+ 18 Aug 16:16:37 [31701] done (to 2:280/5003@agoranet, failed, S/R: 0/0 (0/0
bytes))
  18 Aug 16:16:37 [31701] session closed, quitting...
  18 Aug 16:16:37 [31700] rc(31701)=0
  18 Aug 16:16:37 [31700] the queue is empty, quitting...
==== End "binkd1.log" ====

That failed so I commented "defnode *" in my binkd.conf and tried again with
the same command line. The log looks like this..


==== Begin "binkd2.log"  ====

  18 Aug 16:17:15 [31718] BEGIN, binkd/1.0.5-pre5/Linux -pP2:280/5003
/usr/local/etc/binkd.conf
? 18 Aug 16:17:15 [31718] Cannot find domain for zone 2, assuming 'fidonet'
  18 Aug 16:17:15 [31718] creating a poll for 2:280/5003@fidonet (`d' flavour)
  18 Aug 16:17:15 [31718] clientmgr started
+ 18 Aug 16:17:15 [31719] call to 2:280/5003@fidonet
  18 Aug 16:17:15 [31719] trying 84.106.181.21...
  18 Aug 16:17:15 [31719] connected
+ 18 Aug 16:17:15 [31719] outgoing session with
546AB515.cm-12-3c.dynamic.ziggo.nl [84.106.181.21] (24554)
- 18 Aug 16:17:15 [31719] OPT CRAM-MD5-0f9bb021865a1fcc86f63d4927d643ee
+ 18 Aug 16:17:15 [31719] Remote requests MD mode
- 18 Aug 16:17:15 [31719] SYS Double Dutch
- 18 Aug 16:17:15 [31719] ZYZ Kees Van Eeten
- 18 Aug 16:17:15 [31719] LOC Heerhugowaard, The Netherlands
- 18 Aug 16:17:15 [31719] NDL 115200,TCP,BINKP
- 18 Aug 16:17:15 [31719] TIME Fri, 19 Aug 2016 01:17:15 +0200
- 18 Aug 16:17:15 [31719] VER binkd/1.1a-94/Linux binkp/1.1
+ 18 Aug 16:17:15 [31719] addr: 2:280/5003@fidonet
+ 18 Aug 16:17:15 [31719] addr: 2:280/0@fidonet
- 18 Aug 16:17:16 [31719] OPT EXTCMD GZ BZ2
+ 18 Aug 16:17:16 [31719] Remote supports EXTCMD mode
+ 18 Aug 16:17:16 [31719] Remote supports GZ mode
+ 18 Aug 16:17:16 [31719] Remote supports BZ2 mode
+ 18 Aug 16:17:16 [31719] done (to 2:280/5003@fidonet, OK, S/R: 0/0 (0/0
bytes))
  18 Aug 16:17:16 [31719] session closed, quitting...
  18 Aug 16:17:16 [31718] rc(31719)=0
  18 Aug 16:17:16 [31718] the queue is empty, quitting...
==== End "binkd2.log" ====

That one looks good. I was hoping to add "defnode *" to my config so binkd
would deliver direct or crash mail to a node not in my binkd.conf directly.

I also wonder about the not being able to find domain for zone 2 line at the
top of the log. I wonder if that is normal.

 Ttyl :-),
         Al

.... Internal error: The sytem has been taken over by sheep at line 19960
--- GoldED+/LNX 1.1.5-b20160322
 * Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757)

.