How to install Ariadne-support in AmigaUNIX
===========================================

1) install AmigaUNIX 2.1c (and apply the Patch-Disk).
2) boot the system and log in as "root"
3) ungzip the patchfile ("gunzip install.ariadnne.gz")
4) execute "sh install.ariadne"
5) follow the instructions...

The Ariadne is now handled transparently exactly like the A2065/Ameristar
boards, it is accessed as aenx (x = 0,1,..).
If you e.g. use the default setup (2 computers with A2065), but using
Ariadne instead of A2065, you're all set and running.

Switching betwwen 10Base2 and 10Base-T is handled automagically "on the fly"
with autodetect. As soon as you connect an active (with haertbeat from a
10Base-T hub) twisted-pair line to the Ariadne, it'll switch to 10Base-T mode.
If no 10Base-T heartbeat is detected (no line connected or inactive) 10Base2
(BNC, RG-58 coaxial) is used.
.