C    ணࠬ ࠭ 롮. ᥩ ᪠  롮             C ணࠬ,    ⨥ 㪢 ।饩         C ணࠬ.ਬ, A ᫨      Sணࠬ                                                                    C    ४䨣樮  Menu from which you choose different options  Cin order to configure Internist to your specific computer system, that is to Psay, printer and screen colors.  More...                                     C    ⮣ ⮡  ଠ  ⤥   㪢 樨, ⥬                F1.                                             C      ࠢ饩 ணࠬ Management program.   ⮣,⮡C ᮤঠ ⤥ 権   㪢 ᮮ. 롮        ⥬        F1.                                                    C   饩 ணࠬ.       . 祭 ଠ樨 C। 樨  㪢 ࠭樨, ⥬                SF1.                                                                          C   If there is not already an appropriate classification in which you would  Cwant to list the new attribute, then you may create a new classification by  Sentering Y at this time.                                                     C   You are now prompted to enter the name of the new classification in which Swill be listed the new attribute you will create next.                       S   You are now prompted to enter the name of the new attribute.              C        ᫥饩   ன   ࠡ  S                                                                         C   You are now prompted to enter the number next to the attribute with which Syou want to work.                                                            C   You have just created an attribute for which a suitable alternate may     Calready be present in the data base.  These alternate attributes are         Cdisplayed on your screen, and you are asked if you still want to accept the  Pattribute you just typed in.  More...                                        C   If you find a suitable alternate, then press N to reject the attribute    Cyou just created.  You will then be prompted to enter the number next to the Calternate attribute.                                                         S   If you do not see a suitable attribute, then press Y.                     C   You are now prompted to enter the number next to the classification with  Swhich you want to work.                                                      C   The Drives option allows you to configure Internist+Plus to how the disk  Cdrives are set up on your computer system.  You are first prompted to enter  Cthe letter of the primary drive.  When you have done so, you will be         Sinstructed to enter the letter of the secondary drive.                       C   You are prompted to enter the number next to the attribute that you want  Cto delete from those attributes that you have entered for analysis.  Enter   San A if you want to delete the whole set of attributes.                      C   ⮬     2 ⠯.砫  롨ࠥ "       C஢,  ⥬  ᨬ⮬,  ஢    C-,  롨ࠥ⥭㦭  ᨭ஬ । ᫥  襬                                 ...                                      C   You may also enter findings for analysis by entering N as this time, and  Cthen entering the code number of the attribute.  An alphabetical listing of  Sthe attributes and their code numbers is contained in Appendix B.            C   You are prompted to enter the code number of an attribute that you want   Sto enter for analysis.                                                       C   Enter the number next to the attribute that you want to enter for         Sanalysis.                                                                    C   The error displayed below has occurred.  After correcting the problem     Cand/or pressing the <Enter> key, the program will attempt to continue, or    Syou will be returned to the point in the program where the error occurred.   C   The Edit attributes option allows you to delete attributes from those     Cinput for analysis.  If you wanted to run an analysis on a new set of        Cfindings, you would use this option to delete all the current attributes,    Sand then enter the new set.                                                  C   This is the Pre-analysis screen.  It shows you the number of attributes   Centered for analysis, the highest level of support found, the lowest level   Pof support found and the total number of possible diagnoses.  More...        C   You are now prompted to enter the lowest level of support at which to     Chalt the listing of possible diagnoses.  Press the <Enter> key to have the   Smaximum number of possible diagnoses displayed.                              C   The Analyze attributes option rank-orders the possible diagnoses          Caccording to their levels of support.  The level of support for a particular Cdiagnosis is the number of attributes confirmed by that particular diagnosis Sdivided by the total number of attributes input for analysis.  More...       C   The Reference option allows you to display all the attributes used to     Cdefine a disease or disorder.  You are now prompted to enter the number next Sto the disease or disorder that you want to reference.                       C   Through a series of queries, Internist+Plus prompts you through the       Cprocess of adding a new disease to the data base.  You are now instructed to Senter the name of the new disease.                                           C   You are now going to define (or further define) a disease by its          Cattributes.  If you have finished defining a disease by its attributes, then Penter an S to save the information you have just entered to disk.  More...   C   Internist's general medicine data base contains 537 attributes that have  Cbeen grouped into 25 classifications.  Finding and selecting an attribute to Cadd to a disease is accomplished in a two-step process.                      P   More...                                                                   C   First, you enter the number next to the classification in which is listed Cthe attribute that you want to add to the disease.  The attributes in that   Cclassification will then be displayed on your screen.                        P   More...                                                                   C   Second, you enter the number next to the attribute that you want to add.  C   You may continue to add attributes by entering more numbers.  Press the   C<Enter> key when you have finished adding attributes from that               Pclassification.  More...                                                     C   You may also add attributes by entering N at this time, and then entering Ceither the code number of the attribute or up to the first three letters of  Pthe attribute.  More...                                                      C   If you wish to add an attribute that is not currently in the data base,   Sthen enter C at this time.                                                   C   This is the Selecting an attribute screen from which you will choose the  Cattribute with which you want to work.  You may enter the number of the      Cattribute directly now.  An alphabetical listing of the attributes in the    Pdata base and their code numbers is in Appendix B.  More...                  C   If you want to view all the attributes in the data base in alphabetical   Corder, then press the <Enter> key now.  Use the <spacebar> to scroll through Cthe attributes until you find the attribute that you want to use, then enter Pits number.  More...                                                         C   You may also search for an attribute by entering up to the first three    Cletters of its name at this time.  All the attributes in the data base that  Cstart with that letter, or combination of letters, will then be displayed on Son your screen.                                                              C   You are now prompted to enter the number next to the attribute that you   Cwant to add to the disease in question.  If there is another attribute       Clisted that you want to add, then enter its number.                          P   More...                                                                   C   If there are no attributes listed that you want to add, or you have       Cfinished adding attributes from the classification, then press the <Enter>   Skey to return to the Classifications menu.                                   C   This is the Selecting a disease screen from which you will choose the     Cdisease with which you want to work.  You may enter the number of the        Cdisease directly now.  An alphabetical listing of the diseases in the data   Pbase and their code numbers is in Appendix A of the User's Guide.  More...   C   If you want to view all the diseases in the data base in alphabetical     Corder, then press the <Enter> key now.  Use the <spacebar> to scroll through Cthe diseases until you find the disease that you want to use, then enter its Pnumber.  More...                                                             C   You may also search for a disease by entering up to the first three       Cletters of its name at this time.  All the diseases in the data base that    Cstart with that letter, or combination of letters, will then be displayed on Son your screen.                                                              C   This is the Changing a disease menu from which you may choose to change   Ca disease's attributes or name.  To obtain help concerning a particular      Soption, press the letter of the desired option and then press F1.            C   You are viewing the current attributes of the disease to which you want   Cto add more attributes.  If there are more attributes than can be displayed  Pon your screen at one time, then press the <spacebar>.  More...              C   When you have finished reviewing the current attributes, press the        C<Enter> key, and you will be taken to the Classifications menu, where you    Smay add more attributes to the disease with which you are working.           C   The DELETE attributes option allows you to delete attributes from the     Cdisease with which you are working.  You are shown the current attributes of Cthe disease.  You delete an attribute by entering the number next to it.     PWhen you do so, the selected attribute will be highlighted.  More...         C   You may delete as many attributes at this time as you want.  When you     Chave finished selecting the attributes that you want to delete, press the    C<Enter> key.  The changes you have made will be saved to disk, and you will  Sbe returned to the Changing a disease menu.                                  C   You are prompted to enter the new name for the disease.  The current name Sis shown in the title.                                                       C   The Printer option allows you to configure Internist to work with your    Cprinter.  Internist uses decimal expressions for control codes, as opposed   Cto ASCII or hexadecimal.  Single character control codes should be entered   Pas the decimal value of the control character.  More...                      CFor example, if you wanted your reports in compressed printing and the       Ccontrol code for compressed printing for your printer is control character   P15 (Ctrl-O), then make the initialization string: 15.  More...               C   Control codes that are Escape sequences should be entered as the number   C27, followed by a space, followed by the appropriate decimal representation, Cfollowed by a space, followed by another decimal value (if needed).          P   For example, 27 78 12 sets the skip-over-perforation to 12 lines. More... C   You are now prompted to enter the number (1-13) of the value or sequence  Cthat you want to change.                                                     C   When you have finished making the necessary changes, press the <Enter>    Skey to end, and the changes you have made will be written to disk.           S   You are now prompted to enter the new value or sequence.                  C   You are advised to make sure that your printer is turned on, and that the Ctop of form is properly aligned.  The print head should be half the number   Cof lines from the top of the paper as you have assigned to the skip-over-    Pperforation value.  More...                                                  C   For example, if the skip-over-perforation value is 12 lines, then you     Cshould place the print head 6 lines from the top of the paper.  If you are   Cnot using skip-over-perforation, then you should also place the print head   S6 lines from the top of the paper.                                           C   Press D to continue with the delete procedure, or press the <Esc> key to  Sback up.  Warning!!!  The results of the delete procedure are irreversible.  C   The Change WORDING option allows you to change the wording of an          Cattribute.  You are prompted to enter the number next to the classification  Sin which is listed the attribute that you want to change.                    C   You are prompted to enter the number next to the attribute that you want  Sto select.                                                                   C   You are shown the current attribute and prompted to enter the new         Cwording for the attribute.  The program will make sure that the new name for Sthe attribute is not the name of an attribute already in the data base.      C   The Change WORDING option allows you to change the wording of a           Cclassification.  You are prompted to enter the number next to the            Sclassification whose wording you want to change.                             C   The current wording of the classification is displayed, and you are       Sprompted to enter the new name for the classification.                       C   The Colors option allows you to choose the foreground and background      Ccolors that you want.  If you have a monochrome monitor, only the values 7   S(light) and 0 (black) are allowed.                                           C   The Change CLASSIFICATION option allows you to change the classification  Cin which an attribute is listed, i.e., move an attribute from one            Cclassification to another.  You are prompted to enter the number next to the Sclassification in which is listed the attribute that you want to move.       C   You are now prompted to enter the number next to the classification to    Cwhich you want to move the attribute.  You may also create a new             Sclassification for the attribute by entering C at this time.                 C   You are prompted to enter the name of the new classification in which     Swill be listed the attribute you are moving.                                 C   The DELETE an attribute option allows you to delete an attribute from the Cdata base.  You are prompted to enter the number next to the classification  Sin which is listed the attribute that you want to delete.                    C   The Analyze attributes option rank-orders the possible diagnoses          Caccording to their levels of support.  The level of support for a particular Cdiagnosis is the number of attributes confirmed by that particular diagnosis Pdivided by the total number of attributes input for analysis.  More...       C   If there are more diagnoses than can be displayed on the screen at one    Ctime, then you can press the <spacebar> to scroll through the remaining      Cdiagnoses.                                                                   P   More...                                                                   C   To reference a disease, press R, and then enter the number next to the    Cdisease that you want to reference.                                          C   To obtain a hardcopy of the analysis, press P now.  After pressing P,     Syou will be presented with a printer advisory and a pre-analysis prompt.     C   The attributes used to describe the disease you selected are displayed on Cyour screen.  If there are more attributes than can be displayed on your     Cmonitor at one time, then you can press the <spacebar> to view the remain-   Ping attributes.  More...                                                     C   To obtain a hardcopy of the reference, press P now.  The reference will   Cbe printed out following your response to a printer advisory prompt.         C   Press the <Esc> key to either return to the Selecting a disease screen,   Sor to the analysis you were running before you chose the R)eference option.  