SHELL Modem Menu v1.0 Ryan Snodgrass       REGISTRATION $5.00
COMM MAY90 COMMUNICATIONS MENU SHELL PROCOMM SNODGRASS
FILES: smmenu10.sdn

New Release

SHELL  Modem  Menu  was  developed  mainly  for  Procomm Plus
communication program,  but was  also designed  so you  could
also  use  it  straight  for  the  DOS  prompt.   It was also
designed so  that you  could edit  the menu  from within  the
program so as you would not have to exit the program and have
a text editor to redesign the program.

The first  thing we  will cover  is setting  up the programs.
When  you  first  load  SHELL  Modem  Menu  you  should see a
question mark at each selection.  You must push the letter  S
and then it will ask you to push the number you wish to edit.
Then a box will come up that looks something like:

            ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
            º Program Name: °°°°°°°°°°°°°°°°°°°°° º
            º File Name: °°°°°°°°°°°°°°°°°°°°°°°° º
            º Path Of File: °°°°°°°°°°°°°°°°°°°°° º
            ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

The first selection you should come to is Program Name:.   In
this box you should type in the name of the program that  you
would like to be displayed on the menu.  The next box is  the
File  Name:.     In  this  box,  type  in the filename of the
program.  Example of a filename:  EXAMPLE.EXE.  The  filename
must include the .EXE, .COM, or .BAT extension.  The next box
is the Path Of File:.  In this box you should enter the  path
of the  file.   Example of  a path:   C:\EXAMPLE\.   You MUST
include the slash (\) at the end of the path.  If the program
is in the same directory as the menu you do not need to put a
path in.  Then press the letter Q to go back to the main menu
and then press the selection number that you chose to see  if
it worked.  If you went  back to the box like that  above you
needed to press the letter Q  until you got out of the  setup
part of the program.

Hardware Requirements: IBM PC/XT/AT or Compatible
computer, 520k RAM

Other Requirements: DOS 3.x or higher

(SDA format (c)Copyright 1990 The SDN Project & SDNet/Works!)