(DIR) rss
        ___          ___ ___ 
       | _ ) ___ ___| _ ) __|
       | _ \/ -_) -_) _ \__ \
       |___/\___\___|___/___/
        ⢹⠁ ⣇⡀ ⢀⡀   ⣏⡱ ⣏⡱ ⢎⡑   ⢀⣸ ⢀⡀ ⢀⣀ ⠄ ⢀⡀ ⣀⡀ ⢀⡀ ⢀⣸   ⣰⡁ ⢀⡀ ⡀⣀   ⣰⡀ ⣇⡀ ⢀⡀   ⣏⡱ ⣏⡱ ⡎⠑
        ⠸  ⠇⠸ ⠣⠭   ⠧⠜ ⠧⠜ ⠢⠜   ⠣⠼ ⠣⠭ ⠭⠕ ⠇ ⣑⡺ ⠇⠸ ⠣⠭ ⠣⠼   ⢸  ⠣⠜ ⠏    ⠘⠤ ⠇⠸ ⠣⠭   ⠧⠜ ⠧⠜ ⠣⠔
        ⡷⢾ ⠄ ⢀⣀ ⡀⣀ ⢀⡀
        ⠇⠸ ⠇ ⠣⠤ ⠏  ⠣⠜
 (DIR) Updates
        ⡎⠑ ⢀⡀ ⣀⡀ ⣀⡀ ⢀⡀ ⢀⣀ ⣰⡀ ⠄ ⣀⡀ ⢀⡀
        ⠣⠔ ⠣⠜ ⠇⠸ ⠇⠸ ⠣⠭ ⠣⠤ ⠘⠤ ⠇ ⠇⠸ ⣑⡺
 (IMG) Commstar
        ⡎⠑ ⢀⡀ ⣀⡀ ⣀⡀ ⢀⡀ ⢀⣀ ⣰⡀ ⠄ ⣀⡀ ⢀⡀   ⣰⡀ ⢀⡀
        ⠣⠔ ⠣⠜ ⠇⠸ ⠇⠸ ⠣⠭ ⠣⠤ ⠘⠤ ⠇ ⠇⠸ ⣑⡺   ⠘⠤ ⠣⠜
       beebs.ddns.net:6502
        ⡎⠑ ⡇ ⠄ ⢀⡀ ⣀⡀ ⣰⡀   ⣏⡱ ⢀⡀ ⢀⣀ ⢀⡀ ⣀⣀  ⣀⣀  ⢀⡀ ⣀⡀ ⢀⣸ ⢀⣀ ⣰⡀ ⠄ ⢀⡀ ⣀⡀ ⢀⣀
        ⠣⠔ ⠣ ⠇ ⠣⠭ ⠇⠸ ⠘⠤   ⠇⠱ ⠣⠭ ⠣⠤ ⠣⠜ ⠇⠇⠇ ⠇⠇⠇ ⠣⠭ ⠇⠸ ⠣⠼ ⠣⠼ ⠘⠤ ⠇ ⠣⠜ ⠇⠸ ⠭⠕
       Any terminal client works well, but for the best results I would
       recommend the following:
       Windows:
 (HTM) Syncterm
       Linux:
 (HTM) Syncterm
       Android: ConnectBot
       iOS: MuffinTerm
       BBC Micro: Commstar / Commstar II / Termulator
       Mode 7 Web Client:
 (HTM) JS-BeeBS
       ANSI Web Client:
 (HTM) Telnet Guide
       
        ⣇⣸ ⢀⡀ ⡀ ⢀   ⣰⡀ ⢀⡀   ⢀⣀ ⢀⡀ ⣀⡀ ⣀⡀ ⢀⡀ ⢀⣀ ⣰⡀
        ⠇⠸ ⠣⠜ ⠱⠱⠃   ⠘⠤ ⠣⠜   ⠣⠤ ⠣⠜ ⠇⠸ ⠇⠸ ⠣⠭ ⠣⠤ ⠘⠤
       Point your terminal client to beebs.ddns.net port 6502 and hit
       connect. In Syncterm settings choose either 80x25 for ANSI or BBC Mode
       7 for Mode 7 and ensure connection type is RAW not Telnet.
        ⡎⠑ ⢀⡀ ⣀⡀ ⣀⡀ ⢀⡀ ⢀⣀ ⣰⡀ ⠄ ⣀⡀ ⢀⡀   ⣰⡁ ⡀⣀ ⢀⡀ ⣀⣀    ⢀⣀   ⣏⡱ ⣏⡱ ⡎⠑   ⢀⣀ ⢀⡀ ⡀⣀ ⠄ ⢀⡀ ⢀⣀
        ⠣⠔ ⠣⠜ ⠇⠸ ⠇⠸ ⠣⠭ ⠣⠤ ⠘⠤ ⠇ ⠇⠸ ⣑⡺   ⢸  ⠏  ⠣⠜ ⠇⠇⠇   ⠣⠼   ⠧⠜ ⠧⠜ ⠣⠔   ⠭⠕ ⠣⠭ ⠏  ⠇ ⠣⠭ ⠭⠕
        ⢀⣀ ⢀⡀ ⣀⣀  ⣀⡀ ⡀⢀ ⣰⡀ ⢀⡀ ⡀⣀
        ⠣⠤ ⠣⠜ ⠇⠇⠇ ⡧⠜ ⠣⠼ ⠘⠤ ⠣⠭ ⠏
       In your comms package of choice select Terminal (not viewdata/prestel)
       set your parity to 8n1 and your baud to a max of 9600 (or if you're a
       lucky devil using Linemaster then 19200 baud), auto line feeds off.
       To view Mode 7 graphics in your terminal software (Commstar,
       Termulator etc.) you need to turn filtering OFF.
       
        ⡇⢸ ⢀⣀ ⠄ ⣀⡀ ⢀⡀   ⣰⡀ ⣇⡀ ⢀⡀   ⣏⡱ ⣏⡱ ⡎⠑   ⡷⢾ ⢀⣀ ⢀⣀ ⣰⡀ ⢀⡀ ⡀⣀   ⢺  ⠊⡱ ⢎⡱ ⠃ ⢀⣀
        ⠣⠜ ⠭⠕ ⠇ ⠇⠸ ⣑⡺   ⠘⠤ ⠇⠸ ⠣⠭   ⠧⠜ ⠧⠜ ⠣⠔   ⠇⠸ ⠣⠼ ⠭⠕ ⠘⠤ ⠣⠭ ⠏    ⠼⠄ ⠮⠤ ⠣⠜   ⠭⠕
        ⣏⡱ ⡀⢀ ⠄ ⡇ ⣰⡀   ⠄ ⣀⡀   ⢹⠁ ⢀⡀ ⡀⣀ ⣀⣀  ⠄ ⣀⡀ ⢀⣀ ⡇
        ⠧⠜ ⠣⠼ ⠇ ⠣ ⠘⠤   ⠇ ⠇⠸   ⠸  ⠣⠭ ⠏  ⠇⠇⠇ ⠇ ⠇⠸ ⠣⠼ ⠣
       1.  Configure your Baud Rate e.g. *Configure Baud 7 <return> will set
       your baud to 9600.
       2.  Configure your Data parameter *Configure Data 5 <return> which
       gives 8n1.
       3.  Switch to Terminal mode *Terminal <return>.
       4.  At the terminal prompt (=) type MODE 7 <return> BBC <return> which
       will allow full BBC VDU support.
       5.  Press <escape> the connect in your usual way (e.g.
       ATDTbeebs.ddns.net:6502)...this all depends on what is connected
       to the other end of your beebs serial cable.
       For day to day the built in terminal rom will work fine, however you
       will be unable to download (as far as I know *terminal does not
       support X-Modem CRC file transfers)...for that reason I would
       recommend a different comms package.
        ⣇⣸ ⢀⡀ ⡀ ⢀   ⢀⣸ ⢀⡀   ⡇   ⢀⣸ ⢀⡀ ⡀ ⢀ ⣀⡀ ⡇ ⢀⡀ ⢀⣀ ⢀⣸   ⣰⡁ ⠄ ⡇ ⢀⡀ ⢀⣀   ⠄ ⣀⡀
        ⠇⠸ ⠣⠜ ⠱⠱⠃   ⠣⠼ ⠣⠜   ⠇   ⠣⠼ ⠣⠜ ⠱⠱⠃ ⠇⠸ ⠣ ⠣⠜ ⠣⠼ ⠣⠼   ⢸  ⠇ ⠣ ⠣⠭ ⠭⠕   ⠇ ⠇⠸
        ⡎⠑ ⢀⡀ ⣀⣀  ⣀⣀  ⢀⣀ ⣰⡀ ⢀⣀ ⡀⣀
        ⠣⠔ ⠣⠜ ⠇⠇⠇ ⠇⠇⠇ ⠭⠕ ⠘⠤ ⠣⠼ ⠏
       1.  Select the file you would like to download on BeeBS.
       2.  When prompted select X-Modem 128.
       3.  You should see "Starting to Send File..."
       4.  Press <escape> to return to the Commstar menu and select D to
       download.
       If the file is larger than your RAM buffer you may need to change from
       using Buffer to Disc instead.
 (DIR) Welcome
       Created on my Acorn BBC Master 128
 (DIR) Contact Me