ARCHIVAL REPRINT
Kaypro Terminal Emulation

EDITOR'S NOTE (2026-10-08)
The Kaypro II manual gives the cursor-position sequence as ESC, =, row
+ 32, column + 32, counting from zero. That's 20h, not decimal 20. The
examples below use 20; I've left the original text intact. Other
controls depend on the model and CP/M revision.

Source: Kaypro II Dealer Reference Manual (1982), Table 2-6, printed
page 27 / PDF page 29.
https://bitsavers.trailing-edge.com/pdf/kaypro/Kaypro_II_Dealer_Reference_Manual_1982.pdf

--- ORIGINAL ARCHIVAL TEXT ---

Kaypro Terminal Emulation
The Kaypro's emulate the Lear-Seigler ADM-3A terminal.


CURSOR CONTROL
  ring bell    -     7 dec - 07H
  cursor left  -     8 dec - 08H
  cursor right -    12 dec - 0CH
  cursor down  -    10 dec - 0AH
  cursor up    -    11 dec - 0BH
  home cursor  -    30 dec - 1EH
  clear scr & home  26 dec - 1AH
  carriage return   13 dec - 0DH

CURSOR POSITIONING
  rows              = 0 - 23 dec
  columns           = 0 - 79 dec
  escape sequence   = 27, 61 dec - 1BH, 3DH
  constant offset   = 20     dec - 14H

  So in Mbasic to position the cursor at row 12, col 40
  print chr$(27)chr$(61)chr$(20+12)chr$(20+40)
                ESC = row col

LINE INSERT / DELETE
  insert line  - 27, 69 dec - 1BH, 45H { scroll down }
  delete line  - 27, 82 dec - 1BH, 52H { scroll up   }

CLEAR TO END OF LINE / SCREEN
  clear to EOL - 24 dec - 18H
  clear to EOS - 23 dec - 17H

CHANGE CHARACTER SETS
  set ASCII    - 27,65 dec - 1BH,41H
  set greek    - 27,71 dec - 1BH,47H